1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright 2017 General Electric Company
4  *
5  * Based on board/freescale/mx53loco/mx53loco_video.c:
6  *
7  * Copyright (C) 2012 Freescale Semiconductor, Inc.
8  * Fabio Estevam <fabio.estevam@freescale.com>
9  */
10 
11 #include <common.h>
12 #include <linux/list.h>
13 #include <asm/gpio.h>
14 #include <asm/arch/iomux-mx53.h>
15 #include <linux/fb.h>
16 #include <ipu_pixfmt.h>
17 #include <asm/arch/crm_regs.h>
18 #include <asm/arch/imx-regs.h>
19 #include <asm/io.h>
20 #include <pwm.h>
21 #include "ppd_gpio.h"
22 
23 #define MX53PPD_LCD_POWER		IMX_GPIO_NR(3, 24)
24 
25 static struct fb_videomode const nv_spwg = {
26 	.name		= "NV-SPWGRGB888",
27 	.refresh	= 60,
28 	.xres		= 800,
29 	.yres		= 480,
30 	.pixclock	= 15384,
31 	.left_margin	= 16,
32 	.right_margin	= 210,
33 	.upper_margin	= 10,
34 	.lower_margin	= 22,
35 	.hsync_len	= 30,
36 	.vsync_len	= 13,
37 	.sync		= FB_SYNC_EXT,
38 	.vmode		= FB_VMODE_NONINTERLACED
39 };
40 
41 void setup_iomux_lcd(void)
42 {
43 	static const iomux_v3_cfg_t lcd_pads[] = {
44 		MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK,
45 		MX53_PAD_DI0_PIN15__IPU_DI0_PIN15,
46 		MX53_PAD_DI0_PIN2__IPU_DI0_PIN2,
47 		MX53_PAD_DI0_PIN3__IPU_DI0_PIN3,
48 		MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0,
49 		MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1,
50 		MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2,
51 		MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3,
52 		MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4,
53 		MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5,
54 		MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6,
55 		MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7,
56 		MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8,
57 		MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9,
58 		MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10,
59 		MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11,
60 		MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12,
61 		MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13,
62 		MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14,
63 		MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15,
64 		MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16,
65 		MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17,
66 		MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18,
67 		MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19,
68 		MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20,
69 		MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21,
70 		MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22,
71 		MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23,
72 	};
73 
74 	imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
75 }
76 
77 static void lcd_enable(void)
78 {
79 	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
80 	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
81 
82 	/* Set LDB_DI0 as clock source for IPU_DI0 */
83 	clrsetbits_le32(&mxc_ccm->cscmr2,
84 			MXC_CCM_CSCMR2_DI0_CLK_SEL_MASK,
85 			MXC_CCM_CSCMR2_DI0_CLK_SEL(
86 				MXC_CCM_CSCMR2_DI0_CLK_SEL_LDB_DI0_CLK));
87 
88 	/* Turn on IPU LDB DI0 clocks */
89 	setbits_le32(&mxc_ccm->CCGR6, MXC_CCM_CCGR6_LDB_DI0(3));
90 
91 	/* Turn on IPU DI0 clocks */
92 	setbits_le32(&mxc_ccm->CCGR6, MXC_CCM_CCGR6_IPU_DI0(3));
93 
94 	/* Configure LDB */
95 	writel(IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG |
96 		IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT |
97 		IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0,
98 		&iomux->gpr[2]);
99 
100 	/* Enable backlights  */
101 	pwm_init(1, 0, 0);
102 
103 	/* duty cycle 5000000ns, period: 5000000ns */
104 	pwm_config(1, 5000000, 5000000);
105 
106 	/* Backlight Power */
107 	gpio_direction_output(BACKLIGHT_ENABLE, 1);
108 
109 	pwm_enable(1);
110 }
111 
112 static int do_lcd_enable(cmd_tbl_t *cmdtp, int flag, int argc,
113 			 char * const argv[])
114 {
115 	lcd_enable();
116 	return 0;
117 }
118 
119 U_BOOT_CMD(
120 	ppd_lcd_enable,	1,	1,	do_lcd_enable,
121 	"enable PPD LCD",
122 	"no parameters"
123 );
124 
125 int board_video_skip(void)
126 {
127 	int ret;
128 
129 	ret = ipuv3_fb_init(&nv_spwg, 0, IPU_PIX_FMT_RGB24);
130 	if (ret)
131 		printf("Display cannot be configured: %d\n", ret);
132 
133 	return ret;
134 }
135