1 /*
2  * (C) Copyright 2013
3  * Dirk Eibach,  Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  */
23 
24 #include <common.h>
25 #include <command.h>
26 #include <pci.h>
27 #include <asm/processor.h>
28 #include <asm/mmu.h>
29 #include <asm/cache.h>
30 #include <asm/immap_85xx.h>
31 #include <asm/fsl_pci.h>
32 #include <fsl_ddr_sdram.h>
33 #include <asm/fsl_serdes.h>
34 #include <asm/io.h>
35 #include <libfdt.h>
36 #include <fdt_support.h>
37 #include <fsl_mdio.h>
38 #include <tsec.h>
39 #include <asm/fsl_law.h>
40 #include <netdev.h>
41 #include <i2c.h>
42 #include <pca9698.h>
43 #include <watchdog.h>
44 #include "../common/dp501.h"
45 #include "controlcenterd-id.h"
46 
47 DECLARE_GLOBAL_DATA_PTR;
48 
49 enum {
50 	HWVER_100 = 0,
51 	HWVER_110 = 1,
52 	HWVER_120 = 2,
53 };
54 
55 struct ihs_fpga {
56 	u32 reflection_low;	/* 0x0000 */
57 	u32 versions;		/* 0x0004 */
58 	u32 fpga_version;	/* 0x0008 */
59 	u32 fpga_features;	/* 0x000c */
60 	u32 reserved[4];	/* 0x0010 */
61 	u32 control;		/* 0x0020 */
62 };
63 
64 #ifndef CONFIG_TRAILBLAZER
65 static struct pci_device_id hydra_supported[] = {
66 	{ 0x6d5e, 0xcdc0 },
67 	{}
68 };
69 
70 static void hydra_initialize(void);
71 #endif
72 
73 int board_early_init_f(void)
74 {
75 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
76 	ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR);
77 
78 	/* Reset eLBC_DIU and SPI_eLBC in case we are booting from SD */
79 	clrsetbits_be32(&gur->pmuxcr, 0x00600000, 0x80000000);
80 
81 	/* Set pmuxcr to allow both i2c1 and i2c2 */
82 	setbits_be32(&gur->pmuxcr, 0x00001000);
83 
84 	/* Set pmuxcr to enable GPIO 3_11-3_13 */
85 	setbits_be32(&gur->pmuxcr, 0x00000010);
86 
87 	/* Set pmuxcr to enable GPIO 2_31,3_9+10 */
88 	setbits_be32(&gur->pmuxcr, 0x00000020);
89 
90 	/* Set pmuxcr to enable GPIO 2_28-2_30 */
91 	setbits_be32(&gur->pmuxcr, 0x000000c0);
92 
93 	/* Set pmuxcr to enable GPIO 3_20-3_22 */
94 	setbits_be32(&gur->pmuxcr2, 0x03000000);
95 
96 	/* Set pmuxcr to enable IRQ0-2 */
97 	clrbits_be32(&gur->pmuxcr, 0x00000300);
98 
99 	/* Set pmuxcr to disable IRQ3-11 */
100 	setbits_be32(&gur->pmuxcr, 0x000000F0);
101 
102 	/* Read back the register to synchronize the write. */
103 	in_be32(&gur->pmuxcr);
104 
105 	/* Set the pin muxing to enable ETSEC2. */
106 	clrbits_be32(&gur->pmuxcr2, 0x001F8000);
107 
108 #ifdef CONFIG_TRAILBLAZER
109 	/*
110 	 * GPIO3_10 SPERRTRIGGER
111 	 */
112 	setbits_be32(&pgpio->gpdir, 0x00200000);
113 	clrbits_be32(&pgpio->gpdat, 0x00200000);
114 	udelay(100);
115 	setbits_be32(&pgpio->gpdat, 0x00200000);
116 	udelay(100);
117 	clrbits_be32(&pgpio->gpdat, 0x00200000);
118 #endif
119 
120 	/*
121 	 * GPIO3_11 CPU-TO-FPGA-RESET#
122 	 */
123 	setbits_be32(&pgpio->gpdir, 0x00100000);
124 	clrbits_be32(&pgpio->gpdat, 0x00100000);
125 
126 	/*
127 	 * GPIO3_21 CPU-STATUS-WATCHDOG-TRIGGER#
128 	 */
129 	setbits_be32(&pgpio->gpdir, 0x00000400);
130 
131 	return 0;
132 }
133 
134 int checkboard(void)
135 {
136 	printf("Board: ControlCenter DIGITAL\n");
137 
138 	return 0;
139 }
140 
141 int misc_init_r(void)
142 {
143 	return 0;
144 }
145 
146 /*
147  * A list of PCI and SATA slots
148  */
149 enum slot_id {
150 	SLOT_PCIE1 = 1,
151 	SLOT_PCIE2,
152 	SLOT_PCIE3,
153 	SLOT_PCIE4,
154 	SLOT_PCIE5,
155 	SLOT_SATA1,
156 	SLOT_SATA2
157 };
158 
159 /*
160  * This array maps the slot identifiers to their names on the P1022DS board.
161  */
162 static const char * const slot_names[] = {
163 	[SLOT_PCIE1] = "Slot 1",
164 	[SLOT_PCIE2] = "Slot 2",
165 	[SLOT_PCIE3] = "Slot 3",
166 	[SLOT_PCIE4] = "Slot 4",
167 	[SLOT_PCIE5] = "Mini-PCIe",
168 	[SLOT_SATA1] = "SATA 1",
169 	[SLOT_SATA2] = "SATA 2",
170 };
171 
172 /*
173  * This array maps a given SERDES configuration and SERDES device to the PCI or
174  * SATA slot that it connects to.  This mapping is hard-coded in the FPGA.
175  */
176 static u8 serdes_dev_slot[][SATA2 + 1] = {
177 	[0x01] = { [PCIE3] = SLOT_PCIE4, [PCIE2] = SLOT_PCIE5 },
178 	[0x02] = { [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
179 	[0x09] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE4,
180 		   [PCIE2] = SLOT_PCIE5 },
181 	[0x16] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2,
182 		   [PCIE2] = SLOT_PCIE3,
183 		   [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
184 	[0x17] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2,
185 		   [PCIE2] = SLOT_PCIE3 },
186 	[0x1a] = { [PCIE1] = SLOT_PCIE1, [PCIE2] = SLOT_PCIE3,
187 		   [PCIE2] = SLOT_PCIE3,
188 		   [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
189 	[0x1c] = { [PCIE1] = SLOT_PCIE1,
190 		   [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
191 	[0x1e] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE3 },
192 	[0x1f] = { [PCIE1] = SLOT_PCIE1 },
193 };
194 
195 
196 /*
197  * Returns the name of the slot to which the PCIe or SATA controller is
198  * connected
199  */
200 const char *board_serdes_name(enum srds_prtcl device)
201 {
202 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
203 	u32 pordevsr = in_be32(&gur->pordevsr);
204 	unsigned int srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
205 				MPC85xx_PORDEVSR_IO_SEL_SHIFT;
206 	enum slot_id slot = serdes_dev_slot[srds_cfg][device];
207 	const char *name = slot_names[slot];
208 
209 	if (name)
210 		return name;
211 	else
212 		return "Nothing";
213 }
214 
215 void hw_watchdog_reset(void)
216 {
217 	ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR);
218 
219 	clrbits_be32(&pgpio->gpdat, 0x00000400);
220 	setbits_be32(&pgpio->gpdat, 0x00000400);
221 }
222 
223 #ifdef CONFIG_TRAILBLAZER
224 int do_bootd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
225 {
226 	return run_command(env_get("bootcmd"), flag);
227 }
228 
229 int board_early_init_r(void)
230 {
231 	ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR);
232 
233 	/*
234 	 * GPIO3_12 PPC_SYSTEMREADY#
235 	 */
236 	setbits_be32(&pgpio->gpdir, 0x00080000);
237 	setbits_be32(&pgpio->gpodr, 0x00080000);
238 	clrbits_be32(&pgpio->gpdat, 0x00080000);
239 
240 	return ccdm_compute_self_hash();
241 }
242 
243 int last_stage_init(void)
244 {
245 	startup_ccdm_id_module();
246 	return 0;
247 }
248 
249 #else
250 void pci_init_board(void)
251 {
252 	fsl_pcie_init_board(0);
253 
254 	hydra_initialize();
255 }
256 
257 int board_early_init_r(void)
258 {
259 	unsigned int k = 0;
260 	ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR);
261 
262 	/* wait for FPGA configuration to finish */
263 	while (!pca9698_get_value(0x22, 11) && (k++ < 30))
264 		udelay(100000);
265 
266 	if (k > 30) {
267 		puts("FPGA configuration timed out.\n");
268 	} else {
269 		/* clear FPGA reset */
270 		udelay(1000);
271 		setbits_be32(&pgpio->gpdat, 0x00100000);
272 	}
273 
274 	/* give time for PCIe link training */
275 	udelay(100000);
276 
277 	/*
278 	 * GPIO3_12 PPC_SYSTEMREADY#
279 	 */
280 	setbits_be32(&pgpio->gpdir, 0x00080000);
281 	setbits_be32(&pgpio->gpodr, 0x00080000);
282 	clrbits_be32(&pgpio->gpdat, 0x00080000);
283 
284 	return 0;
285 }
286 
287 int last_stage_init(void)
288 {
289 	/* Turn on Parade DP501 */
290 	pca9698_direction_output(0x22, 7, 1);
291 	udelay(500000);
292 
293 	dp501_powerup(0x08);
294 
295 	startup_ccdm_id_module();
296 
297 	return 0;
298 }
299 
300 /*
301  * Initialize on-board and/or PCI Ethernet devices
302  *
303  * Returns:
304  *      <0, error
305  *       0, no ethernet devices found
306  *      >0, number of ethernet devices initialized
307  */
308 int board_eth_init(bd_t *bis)
309 {
310 	struct fsl_pq_mdio_info mdio_info;
311 	struct tsec_info_struct tsec_info[2];
312 	unsigned int num = 0;
313 
314 #ifdef CONFIG_TSEC1
315 	SET_STD_TSEC_INFO(tsec_info[num], 1);
316 	num++;
317 #endif
318 #ifdef CONFIG_TSEC2
319 	SET_STD_TSEC_INFO(tsec_info[num], 2);
320 	num++;
321 #endif
322 
323 	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
324 	mdio_info.name = DEFAULT_MII_NAME;
325 	fsl_pq_mdio_init(bis, &mdio_info);
326 
327 	return tsec_eth_init(bis, tsec_info, num) + pci_eth_init(bis);
328 }
329 
330 #ifdef CONFIG_OF_BOARD_SETUP
331 int ft_board_setup(void *blob, bd_t *bd)
332 {
333 	phys_addr_t base;
334 	phys_size_t size;
335 
336 	ft_cpu_setup(blob, bd);
337 
338 	base = env_get_bootm_low();
339 	size = env_get_bootm_size();
340 
341 	fdt_fixup_memory(blob, (u64)base, (u64)size);
342 
343 #ifdef CONFIG_HAS_FSL_DR_USB
344 	fsl_fdt_fixup_dr_usb(blob, bd);
345 #endif
346 
347 	FT_FSL_PCI_SETUP;
348 
349 	return 0;
350 }
351 #endif
352 
353 static void hydra_initialize(void)
354 {
355 	unsigned int i;
356 	pci_dev_t devno;
357 
358 	/* Find and probe all the matching PCI devices */
359 	for (i = 0; (devno = pci_find_devices(hydra_supported, i)) >= 0; i++) {
360 		u32 val;
361 		struct ihs_fpga *fpga;
362 		u32 versions;
363 		u32 fpga_version;
364 		u32 fpga_features;
365 
366 		unsigned hardware_version;
367 		unsigned feature_uart_channels;
368 		unsigned feature_sb_channels;
369 
370 		/* Try to enable I/O accesses and bus-mastering */
371 		val = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
372 		pci_write_config_dword(devno, PCI_COMMAND, val);
373 
374 		/* Make sure it worked */
375 		pci_read_config_dword(devno, PCI_COMMAND, &val);
376 		if (!(val & PCI_COMMAND_MEMORY)) {
377 			puts("Can't enable I/O memory\n");
378 			continue;
379 		}
380 		if (!(val & PCI_COMMAND_MASTER)) {
381 			puts("Can't enable bus-mastering\n");
382 			continue;
383 		}
384 
385 		/* read FPGA details */
386 		fpga = pci_map_bar(devno, PCI_BASE_ADDRESS_0,
387 			PCI_REGION_MEM);
388 
389 		/* disable sideband clocks */
390 		writel(1, &fpga->control);
391 
392 		versions = readl(&fpga->versions);
393 		fpga_version = readl(&fpga->fpga_version);
394 		fpga_features = readl(&fpga->fpga_features);
395 
396 		hardware_version = versions & 0xf;
397 		feature_uart_channels = (fpga_features >> 6) & 0x1f;
398 		feature_sb_channels = fpga_features & 0x1f;
399 
400 		printf("FPGA%d: ", i);
401 
402 		switch (hardware_version) {
403 		case HWVER_100:
404 			printf("HW-Ver 1.00\n");
405 			break;
406 
407 		case HWVER_110:
408 			printf("HW-Ver 1.10\n");
409 			break;
410 
411 		case HWVER_120:
412 			printf("HW-Ver 1.20\n");
413 			break;
414 
415 		default:
416 			printf("HW-Ver %d(not supported)\n",
417 			       hardware_version);
418 			break;
419 		}
420 
421 		printf("       FPGA V %d.%02d, features:",
422 		       fpga_version / 100, fpga_version % 100);
423 
424 		printf(" %d uart channel(s)", feature_uart_channels);
425 		printf(" %d sideband channel(s)\n", feature_sb_channels);
426 	}
427 }
428 #endif
429