xref: /openbmc/u-boot/board/gdsys/mpc8308/mpc8308.c (revision 79df00fd)
1 /*
2  * (C) Copyright 2014
3  * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #include <common.h>
9 #include <command.h>
10 #include <asm/processor.h>
11 #include <asm/io.h>
12 #include <asm/global_data.h>
13 
14 #include "mpc8308.h"
15 #include <gdsys_fpga.h>
16 
17 #define REFLECTION_TESTPATTERN 0xdede
18 #define REFLECTION_TESTPATTERN_INV (~REFLECTION_TESTPATTERN & 0xffff)
19 
20 #ifdef CONFIG_SYS_FPGA_NO_RFL_HI
21 #define REFLECTION_TESTREG reflection_low
22 #else
23 #define REFLECTION_TESTREG reflection_high
24 #endif
25 
26 DECLARE_GLOBAL_DATA_PTR;
27 
28 int get_fpga_state(unsigned dev)
29 {
30 	return gd->arch.fpga_state[dev];
31 }
32 
33 int board_early_init_f(void)
34 {
35 	unsigned k;
36 
37 	for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
38 		gd->arch.fpga_state[k] = 0;
39 
40 	return 0;
41 }
42 
43 int board_early_init_r(void)
44 {
45 	unsigned k;
46 	unsigned ctr;
47 
48 	for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
49 		gd->arch.fpga_state[k] = 0;
50 
51 	/*
52 	 * reset FPGA
53 	 */
54 	mpc8308_init();
55 
56 	mpc8308_set_fpga_reset(1);
57 
58 	mpc8308_setup_hw();
59 
60 	for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) {
61 		ctr = 0;
62 		while (!mpc8308_get_fpga_done(k)) {
63 			udelay(100000);
64 			if (ctr++ > 5) {
65 				gd->arch.fpga_state[k] |=
66 					FPGA_STATE_DONE_FAILED;
67 				break;
68 			}
69 		}
70 	}
71 
72 	udelay(10);
73 
74 	mpc8308_set_fpga_reset(0);
75 
76 	for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) {
77 		/*
78 		 * wait for fpga out of reset
79 		 */
80 		ctr = 0;
81 		while (1) {
82 			u16 val;
83 
84 			FPGA_SET_REG(k, reflection_low, REFLECTION_TESTPATTERN);
85 
86 			FPGA_GET_REG(k, REFLECTION_TESTREG, &val);
87 			if (val == REFLECTION_TESTPATTERN_INV)
88 				break;
89 
90 			udelay(100000);
91 			if (ctr++ > 5) {
92 				gd->arch.fpga_state[k] |=
93 					FPGA_STATE_REFLECTION_FAILED;
94 				break;
95 			}
96 		}
97 	}
98 
99 	return 0;
100 }
101