xref: /openbmc/u-boot/board/gdsys/mpc8308/mpc8308.c (revision 730d2544)
1 /*
2  * (C) Copyright 2014
3  * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #include <common.h>
9 #include <command.h>
10 #include <asm/processor.h>
11 #include <asm/io.h>
12 #include <asm/ppc4xx-gpio.h>
13 #include <asm/global_data.h>
14 
15 #include "mpc8308.h"
16 #include <gdsys_fpga.h>
17 
18 #define REFLECTION_TESTPATTERN 0xdede
19 #define REFLECTION_TESTPATTERN_INV (~REFLECTION_TESTPATTERN & 0xffff)
20 
21 #ifdef CONFIG_SYS_FPGA_NO_RFL_HI
22 #define REFLECTION_TESTREG reflection_low
23 #else
24 #define REFLECTION_TESTREG reflection_high
25 #endif
26 
27 DECLARE_GLOBAL_DATA_PTR;
28 
29 int get_fpga_state(unsigned dev)
30 {
31 	return gd->arch.fpga_state[dev];
32 }
33 
34 int board_early_init_f(void)
35 {
36 	unsigned k;
37 
38 	for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
39 		gd->arch.fpga_state[k] = 0;
40 
41 	return 0;
42 }
43 
44 int board_early_init_r(void)
45 {
46 	unsigned k;
47 	unsigned ctr;
48 
49 	for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
50 		gd->arch.fpga_state[k] = 0;
51 
52 	/*
53 	 * reset FPGA
54 	 */
55 	mpc8308_init();
56 
57 	mpc8308_set_fpga_reset(1);
58 
59 	mpc8308_setup_hw();
60 
61 	for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) {
62 		ctr = 0;
63 		while (!mpc8308_get_fpga_done(k)) {
64 			udelay(100000);
65 			if (ctr++ > 5) {
66 				gd->arch.fpga_state[k] |=
67 					FPGA_STATE_DONE_FAILED;
68 				break;
69 			}
70 		}
71 	}
72 
73 	udelay(10);
74 
75 	mpc8308_set_fpga_reset(0);
76 
77 	for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) {
78 		/*
79 		 * wait for fpga out of reset
80 		 */
81 		ctr = 0;
82 		while (1) {
83 			u16 val;
84 
85 			FPGA_SET_REG(k, reflection_low, REFLECTION_TESTPATTERN);
86 
87 			FPGA_GET_REG(k, REFLECTION_TESTREG, &val);
88 			if (val == REFLECTION_TESTPATTERN_INV)
89 				break;
90 
91 			udelay(100000);
92 			if (ctr++ > 5) {
93 				gd->arch.fpga_state[k] |=
94 					FPGA_STATE_REFLECTION_FAILED;
95 				break;
96 			}
97 		}
98 	}
99 
100 	return 0;
101 }
102