1 /* 2 * (C) Copyright 2014 3 * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #include <common.h> 9 #include <hwconfig.h> 10 #include <i2c.h> 11 #include <spi.h> 12 #include <linux/libfdt.h> 13 #include <fdt_support.h> 14 #include <pci.h> 15 #include <mpc83xx.h> 16 #include <fsl_esdhc.h> 17 #include <asm/io.h> 18 #include <asm/fsl_serdes.h> 19 #include <asm/fsl_mpc83xx_serdes.h> 20 21 #include "mpc8308.h" 22 23 #include <gdsys_fpga.h> 24 25 #include "../common/ioep-fpga.h" 26 #include "../common/osd.h" 27 #include "../common/mclink.h" 28 #include "../common/phy.h" 29 #include "../common/fanctrl.h" 30 31 #include <pca953x.h> 32 #include <pca9698.h> 33 34 #include <miiphy.h> 35 36 DECLARE_GLOBAL_DATA_PTR; 37 38 #define MAX_MUX_CHANNELS 2 39 40 enum { 41 MCFPGA_DONE = 1 << 0, 42 MCFPGA_INIT_N = 1 << 1, 43 MCFPGA_PROGRAM_N = 1 << 2, 44 MCFPGA_UPDATE_ENABLE_N = 1 << 3, 45 MCFPGA_RESET_N = 1 << 4, 46 }; 47 48 enum { 49 GPIO_MDC = 1 << 14, 50 GPIO_MDIO = 1 << 15, 51 }; 52 53 unsigned int mclink_fpgacount; 54 struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR; 55 56 struct { 57 u8 bus; 58 u8 addr; 59 } hrcon_fans[] = CONFIG_HRCON_FANS; 60 61 int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data) 62 { 63 int res; 64 65 switch (fpga) { 66 case 0: 67 out_le16(reg, data); 68 break; 69 default: 70 res = mclink_send(fpga - 1, regoff, data); 71 if (res < 0) { 72 printf("mclink_send reg %02lx data %04x returned %d\n", 73 regoff, data, res); 74 return res; 75 } 76 break; 77 } 78 79 return 0; 80 } 81 82 int fpga_get_reg(u32 fpga, u16 *reg, off_t regoff, u16 *data) 83 { 84 int res; 85 86 switch (fpga) { 87 case 0: 88 *data = in_le16(reg); 89 break; 90 default: 91 if (fpga > mclink_fpgacount) 92 return -EINVAL; 93 res = mclink_receive(fpga - 1, regoff, data); 94 if (res < 0) { 95 printf("mclink_receive reg %02lx returned %d\n", 96 regoff, res); 97 return res; 98 } 99 } 100 101 return 0; 102 } 103 104 int checkboard(void) 105 { 106 char *s = env_get("serial#"); 107 bool hw_type_cat = pca9698_get_value(0x20, 20); 108 109 puts("Board: "); 110 111 printf("HRCon %s", hw_type_cat ? "CAT" : "Fiber"); 112 113 if (s != NULL) { 114 puts(", serial# "); 115 puts(s); 116 } 117 118 puts("\n"); 119 120 return 0; 121 } 122 123 int last_stage_init(void) 124 { 125 int slaves; 126 unsigned int k; 127 unsigned int mux_ch; 128 unsigned char mclink_controllers[] = { 0x3c, 0x3d, 0x3e }; 129 u16 fpga_features; 130 bool hw_type_cat = pca9698_get_value(0x20, 20); 131 bool ch0_rgmii2_present = false; 132 133 FPGA_GET_REG(0, fpga_features, &fpga_features); 134 135 /* Turn on Parade DP501 */ 136 pca9698_direction_output(0x20, 10, 1); 137 pca9698_direction_output(0x20, 11, 1); 138 139 ch0_rgmii2_present = !pca9698_get_value(0x20, 30); 140 141 /* wait for FPGA done, then reset FPGA */ 142 for (k = 0; k < ARRAY_SIZE(mclink_controllers); ++k) { 143 unsigned int ctr = 0; 144 145 if (i2c_probe(mclink_controllers[k])) 146 continue; 147 148 while (!(pca953x_get_val(mclink_controllers[k]) 149 & MCFPGA_DONE)) { 150 udelay(100000); 151 if (ctr++ > 5) { 152 printf("no done for mclink_controller %d\n", k); 153 break; 154 } 155 } 156 157 pca953x_set_dir(mclink_controllers[k], MCFPGA_RESET_N, 0); 158 pca953x_set_val(mclink_controllers[k], MCFPGA_RESET_N, 0); 159 udelay(10); 160 pca953x_set_val(mclink_controllers[k], MCFPGA_RESET_N, 161 MCFPGA_RESET_N); 162 } 163 164 if (hw_type_cat) { 165 int retval; 166 struct mii_dev *mdiodev = mdio_alloc(); 167 if (!mdiodev) 168 return -ENOMEM; 169 strncpy(mdiodev->name, bb_miiphy_buses[0].name, MDIO_NAME_LEN); 170 mdiodev->read = bb_miiphy_read; 171 mdiodev->write = bb_miiphy_write; 172 173 retval = mdio_register(mdiodev); 174 if (retval < 0) 175 return retval; 176 for (mux_ch = 0; mux_ch < MAX_MUX_CHANNELS; ++mux_ch) { 177 if ((mux_ch == 1) && !ch0_rgmii2_present) 178 continue; 179 180 setup_88e1514(bb_miiphy_buses[0].name, mux_ch); 181 } 182 } 183 184 /* give slave-PLLs and Parade DP501 some time to be up and running */ 185 udelay(500000); 186 187 mclink_fpgacount = CONFIG_SYS_MCLINK_MAX; 188 slaves = mclink_probe(); 189 mclink_fpgacount = 0; 190 191 ioep_fpga_print_info(0); 192 osd_probe(0); 193 #ifdef CONFIG_SYS_OSD_DH 194 osd_probe(4); 195 #endif 196 197 if (slaves <= 0) 198 return 0; 199 200 mclink_fpgacount = slaves; 201 202 for (k = 1; k <= slaves; ++k) { 203 FPGA_GET_REG(k, fpga_features, &fpga_features); 204 205 ioep_fpga_print_info(k); 206 osd_probe(k); 207 #ifdef CONFIG_SYS_OSD_DH 208 osd_probe(k + 4); 209 #endif 210 if (hw_type_cat) { 211 int retval; 212 struct mii_dev *mdiodev = mdio_alloc(); 213 if (!mdiodev) 214 return -ENOMEM; 215 strncpy(mdiodev->name, bb_miiphy_buses[k].name, 216 MDIO_NAME_LEN); 217 mdiodev->read = bb_miiphy_read; 218 mdiodev->write = bb_miiphy_write; 219 220 retval = mdio_register(mdiodev); 221 if (retval < 0) 222 return retval; 223 setup_88e1514(bb_miiphy_buses[k].name, 0); 224 } 225 } 226 227 for (k = 0; k < ARRAY_SIZE(hrcon_fans); ++k) { 228 i2c_set_bus_num(hrcon_fans[k].bus); 229 init_fan_controller(hrcon_fans[k].addr); 230 } 231 232 return 0; 233 } 234 235 /* 236 * provide access to fpga gpios and controls (for I2C bitbang) 237 * (these may look all too simple but make iocon.h much more readable) 238 */ 239 void fpga_gpio_set(unsigned int bus, int pin) 240 { 241 FPGA_SET_REG(bus >= 4 ? (bus - 4) : bus, gpio.set, pin); 242 } 243 244 void fpga_gpio_clear(unsigned int bus, int pin) 245 { 246 FPGA_SET_REG(bus >= 4 ? (bus - 4) : bus, gpio.clear, pin); 247 } 248 249 int fpga_gpio_get(unsigned int bus, int pin) 250 { 251 u16 val; 252 253 FPGA_GET_REG(bus >= 4 ? (bus - 4) : bus, gpio.read, &val); 254 255 return val & pin; 256 } 257 258 void fpga_control_set(unsigned int bus, int pin) 259 { 260 u16 val; 261 262 FPGA_GET_REG(bus >= 4 ? (bus - 4) : bus, control, &val); 263 FPGA_SET_REG(bus >= 4 ? (bus - 4) : bus, control, val | pin); 264 } 265 266 void fpga_control_clear(unsigned int bus, int pin) 267 { 268 u16 val; 269 270 FPGA_GET_REG(bus >= 4 ? (bus - 4) : bus, control, &val); 271 FPGA_SET_REG(bus >= 4 ? (bus - 4) : bus, control, val & ~pin); 272 } 273 274 void mpc8308_init(void) 275 { 276 pca9698_direction_output(0x20, 4, 1); 277 } 278 279 void mpc8308_set_fpga_reset(unsigned state) 280 { 281 pca9698_set_value(0x20, 4, state ? 0 : 1); 282 } 283 284 void mpc8308_setup_hw(void) 285 { 286 immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; 287 288 /* 289 * set "startup-finished"-gpios 290 */ 291 setbits_be32(&immr->gpio[0].dir, (1 << (31-11)) | (1 << (31-12))); 292 setbits_be32(&immr->gpio[0].dat, 1 << (31-12)); 293 } 294 295 int mpc8308_get_fpga_done(unsigned fpga) 296 { 297 return pca9698_get_value(0x20, 19); 298 } 299 300 #ifdef CONFIG_FSL_ESDHC 301 int board_mmc_init(bd_t *bd) 302 { 303 immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; 304 sysconf83xx_t *sysconf = &immr->sysconf; 305 306 /* Enable cache snooping in eSDHC system configuration register */ 307 out_be32(&sysconf->sdhccr, 0x02000000); 308 309 return fsl_esdhc_mmc_init(bd); 310 } 311 #endif 312 313 static struct pci_region pcie_regions_0[] = { 314 { 315 .bus_start = CONFIG_SYS_PCIE1_MEM_BASE, 316 .phys_start = CONFIG_SYS_PCIE1_MEM_PHYS, 317 .size = CONFIG_SYS_PCIE1_MEM_SIZE, 318 .flags = PCI_REGION_MEM, 319 }, 320 { 321 .bus_start = CONFIG_SYS_PCIE1_IO_BASE, 322 .phys_start = CONFIG_SYS_PCIE1_IO_PHYS, 323 .size = CONFIG_SYS_PCIE1_IO_SIZE, 324 .flags = PCI_REGION_IO, 325 }, 326 }; 327 328 void pci_init_board(void) 329 { 330 immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; 331 sysconf83xx_t *sysconf = &immr->sysconf; 332 law83xx_t *pcie_law = sysconf->pcielaw; 333 struct pci_region *pcie_reg[] = { pcie_regions_0 }; 334 335 fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX, 336 FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); 337 338 /* Deassert the resets in the control register */ 339 out_be32(&sysconf->pecr1, 0xE0008000); 340 udelay(2000); 341 342 /* Configure PCI Express Local Access Windows */ 343 out_be32(&pcie_law[0].bar, CONFIG_SYS_PCIE1_BASE & LAWBAR_BAR); 344 out_be32(&pcie_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB); 345 346 mpc83xx_pcie_init(1, pcie_reg); 347 } 348 349 ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info) 350 { 351 info->portwidth = FLASH_CFI_16BIT; 352 info->chipwidth = FLASH_CFI_BY16; 353 info->interface = FLASH_CFI_X16; 354 return 1; 355 } 356 357 #if defined(CONFIG_OF_BOARD_SETUP) 358 int ft_board_setup(void *blob, bd_t *bd) 359 { 360 ft_cpu_setup(blob, bd); 361 fsl_fdt_fixup_dr_usb(blob, bd); 362 fdt_fixup_esdhc(blob, bd); 363 364 return 0; 365 } 366 #endif 367 368 /* 369 * FPGA MII bitbang implementation 370 */ 371 372 struct fpga_mii { 373 unsigned fpga; 374 int mdio; 375 } fpga_mii[] = { 376 { 0, 1}, 377 { 1, 1}, 378 { 2, 1}, 379 { 3, 1}, 380 }; 381 382 static int mii_dummy_init(struct bb_miiphy_bus *bus) 383 { 384 return 0; 385 } 386 387 static int mii_mdio_active(struct bb_miiphy_bus *bus) 388 { 389 struct fpga_mii *fpga_mii = bus->priv; 390 391 if (fpga_mii->mdio) 392 FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO); 393 else 394 FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDIO); 395 396 return 0; 397 } 398 399 static int mii_mdio_tristate(struct bb_miiphy_bus *bus) 400 { 401 struct fpga_mii *fpga_mii = bus->priv; 402 403 FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO); 404 405 return 0; 406 } 407 408 static int mii_set_mdio(struct bb_miiphy_bus *bus, int v) 409 { 410 struct fpga_mii *fpga_mii = bus->priv; 411 412 if (v) 413 FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO); 414 else 415 FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDIO); 416 417 fpga_mii->mdio = v; 418 419 return 0; 420 } 421 422 static int mii_get_mdio(struct bb_miiphy_bus *bus, int *v) 423 { 424 u16 gpio; 425 struct fpga_mii *fpga_mii = bus->priv; 426 427 FPGA_GET_REG(fpga_mii->fpga, gpio.read, &gpio); 428 429 *v = ((gpio & GPIO_MDIO) != 0); 430 431 return 0; 432 } 433 434 static int mii_set_mdc(struct bb_miiphy_bus *bus, int v) 435 { 436 struct fpga_mii *fpga_mii = bus->priv; 437 438 if (v) 439 FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDC); 440 else 441 FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDC); 442 443 return 0; 444 } 445 446 static int mii_delay(struct bb_miiphy_bus *bus) 447 { 448 udelay(1); 449 450 return 0; 451 } 452 453 struct bb_miiphy_bus bb_miiphy_buses[] = { 454 { 455 .name = "board0", 456 .init = mii_dummy_init, 457 .mdio_active = mii_mdio_active, 458 .mdio_tristate = mii_mdio_tristate, 459 .set_mdio = mii_set_mdio, 460 .get_mdio = mii_get_mdio, 461 .set_mdc = mii_set_mdc, 462 .delay = mii_delay, 463 .priv = &fpga_mii[0], 464 }, 465 { 466 .name = "board1", 467 .init = mii_dummy_init, 468 .mdio_active = mii_mdio_active, 469 .mdio_tristate = mii_mdio_tristate, 470 .set_mdio = mii_set_mdio, 471 .get_mdio = mii_get_mdio, 472 .set_mdc = mii_set_mdc, 473 .delay = mii_delay, 474 .priv = &fpga_mii[1], 475 }, 476 { 477 .name = "board2", 478 .init = mii_dummy_init, 479 .mdio_active = mii_mdio_active, 480 .mdio_tristate = mii_mdio_tristate, 481 .set_mdio = mii_set_mdio, 482 .get_mdio = mii_get_mdio, 483 .set_mdc = mii_set_mdc, 484 .delay = mii_delay, 485 .priv = &fpga_mii[2], 486 }, 487 { 488 .name = "board3", 489 .init = mii_dummy_init, 490 .mdio_active = mii_mdio_active, 491 .mdio_tristate = mii_mdio_tristate, 492 .set_mdio = mii_set_mdio, 493 .get_mdio = mii_get_mdio, 494 .set_mdc = mii_set_mdc, 495 .delay = mii_delay, 496 .priv = &fpga_mii[3], 497 }, 498 }; 499 500 int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) / 501 sizeof(bb_miiphy_buses[0]); 502