1 /* 2 * Copyright (C) 2013 Gateworks Corporation 3 * 4 * Author: Tim Harvey <tharvey@gateworks.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #include <asm/errno.h> 10 #include <common.h> 11 #include <i2c.h> 12 #include <linux/ctype.h> 13 14 #include "gsc.h" 15 16 #define MINMAX(n, percent) ((n)*(100-percent)/100), ((n)*(100+percent)/100) 17 18 /* 19 * The Gateworks System Controller will fail to ACK a master transaction if 20 * it is busy, which can occur during its 1HZ timer tick while reading ADC's. 21 * When this does occur, it will never be busy long enough to fail more than 22 * 2 back-to-back transfers. Thus we wrap i2c_read and i2c_write with 23 * 3 retries. 24 */ 25 int gsc_i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len) 26 { 27 int retry = 3; 28 int n = 0; 29 int ret; 30 31 while (n++ < retry) { 32 ret = i2c_read(chip, addr, alen, buf, len); 33 if (!ret) 34 break; 35 debug("%s: 0x%02x 0x%02x retry%d: %d\n", __func__, chip, addr, 36 n, ret); 37 if (ret != -ENODEV) 38 break; 39 mdelay(10); 40 } 41 return ret; 42 } 43 44 int gsc_i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len) 45 { 46 int retry = 3; 47 int n = 0; 48 int ret; 49 50 while (n++ < retry) { 51 ret = i2c_write(chip, addr, alen, buf, len); 52 if (!ret) 53 break; 54 debug("%s: 0x%02x 0x%02x retry%d: %d\n", __func__, chip, addr, 55 n, ret); 56 if (ret != -ENODEV) 57 break; 58 mdelay(10); 59 } 60 mdelay(100); 61 return ret; 62 } 63 64 #ifdef CONFIG_CMD_GSC 65 static void read_hwmon(const char *name, uint reg, uint size, uint low, 66 uint high) 67 { 68 unsigned char buf[3]; 69 uint ui; 70 71 printf("%-8s:", name); 72 memset(buf, 0, sizeof(buf)); 73 if (gsc_i2c_read(GSC_HWMON_ADDR, reg, 1, buf, size)) { 74 puts("fRD\n"); 75 } else { 76 ui = buf[0] | (buf[1]<<8) | (buf[2]<<16); 77 if (ui == 0xffffff) 78 printf("invalid"); 79 else if (ui < low) 80 printf("%d Failed - Low", ui); 81 else if (ui > high) 82 printf("%d Failed - High", ui); 83 else 84 printf("%d", ui); 85 } 86 puts("\n"); 87 } 88 89 int do_gsc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 90 { 91 const char *model = getenv("model"); 92 93 i2c_set_bus_num(0); 94 read_hwmon("Temp", GSC_HWMON_TEMP, 2, 0, 9000); 95 read_hwmon("VIN", GSC_HWMON_VIN, 3, 8000, 60000); 96 read_hwmon("VBATT", GSC_HWMON_VBATT, 3, 1800, 3500); 97 read_hwmon("VDD_3P3", GSC_HWMON_VDD_3P3, 3, MINMAX(3300, 10)); 98 read_hwmon("VDD_HIGH", GSC_HWMON_VDD_HIGH, 3, MINMAX(3000, 10)); 99 read_hwmon("VDD_DDR", GSC_HWMON_VDD_DDR, 3, MINMAX(1500, 10)); 100 read_hwmon("VDD_5P0", GSC_HWMON_VDD_5P0, 3, MINMAX(5000, 10)); 101 read_hwmon("VDD_2P5", GSC_HWMON_VDD_2P5, 3, MINMAX(2500, 10)); 102 read_hwmon("VDD_1P8", GSC_HWMON_VDD_1P8, 3, MINMAX(1800, 10)); 103 104 switch (model[3]) { 105 case '1': /* GW51xx */ 106 read_hwmon("VDD_CORE", GSC_HWMON_VDD_CORE, 3, MINMAX(1175, 10)); 107 read_hwmon("VDD_SOC", GSC_HWMON_VDD_SOC, 3, MINMAX(1175, 10)); 108 break; 109 case '2': /* GW52xx */ 110 case '3': /* GW53xx */ 111 read_hwmon("VDD_CORE", GSC_HWMON_VDD_CORE, 3, MINMAX(1175, 10)); 112 read_hwmon("VDD_SOC", GSC_HWMON_VDD_SOC, 3, MINMAX(1175, 10)); 113 read_hwmon("VDD_1P0", GSC_HWMON_VDD_1P0, 3, MINMAX(1000, 10)); 114 break; 115 case '4': /* GW54xx */ 116 read_hwmon("VDD_CORE", GSC_HWMON_VDD_CORE, 3, MINMAX(1375, 10)); 117 read_hwmon("VDD_SOC", GSC_HWMON_VDD_SOC, 3, MINMAX(1375, 10)); 118 read_hwmon("VDD_1P0", GSC_HWMON_VDD_1P0, 3, MINMAX(1000, 10)); 119 break; 120 case '5': /* GW55xx */ 121 read_hwmon("VDD_CORE", GSC_HWMON_VDD_CORE, 3, MINMAX(1175, 10)); 122 read_hwmon("VDD_SOC", GSC_HWMON_VDD_SOC, 3, MINMAX(1175, 10)); 123 break; 124 } 125 return 0; 126 } 127 128 U_BOOT_CMD(gsc, 1, 1, do_gsc, 129 "GSC test", 130 "" 131 ); 132 133 #endif /* CONFIG_CMD_GSC */ 134