1 /* 2 * Copyright (C) 2013 Gateworks Corporation 3 * 4 * Author: Tim Harvey <tharvey@gateworks.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #include <linux/errno.h> 10 #include <common.h> 11 #include <i2c.h> 12 #include <linux/ctype.h> 13 14 #include "ventana_eeprom.h" 15 #include "gsc.h" 16 17 /* 18 * The Gateworks System Controller will fail to ACK a master transaction if 19 * it is busy, which can occur during its 1HZ timer tick while reading ADC's. 20 * When this does occur, it will never be busy long enough to fail more than 21 * 2 back-to-back transfers. Thus we wrap i2c_read and i2c_write with 22 * 3 retries. 23 */ 24 int gsc_i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len) 25 { 26 int retry = 3; 27 int n = 0; 28 int ret; 29 30 while (n++ < retry) { 31 ret = i2c_read(chip, addr, alen, buf, len); 32 if (!ret) 33 break; 34 debug("%s: 0x%02x 0x%02x retry%d: %d\n", __func__, chip, addr, 35 n, ret); 36 if (ret != -ENODEV) 37 break; 38 mdelay(10); 39 } 40 return ret; 41 } 42 43 int gsc_i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len) 44 { 45 int retry = 3; 46 int n = 0; 47 int ret; 48 49 while (n++ < retry) { 50 ret = i2c_write(chip, addr, alen, buf, len); 51 if (!ret) 52 break; 53 debug("%s: 0x%02x 0x%02x retry%d: %d\n", __func__, chip, addr, 54 n, ret); 55 if (ret != -ENODEV) 56 break; 57 mdelay(10); 58 } 59 mdelay(100); 60 return ret; 61 } 62 63 static void read_hwmon(const char *name, uint reg, uint size) 64 { 65 unsigned char buf[3]; 66 uint ui; 67 68 printf("%-8s:", name); 69 memset(buf, 0, sizeof(buf)); 70 if (gsc_i2c_read(GSC_HWMON_ADDR, reg, 1, buf, size)) { 71 puts("fRD\n"); 72 } else { 73 ui = buf[0] | (buf[1]<<8) | (buf[2]<<16); 74 if (reg == GSC_HWMON_TEMP && ui > 0x8000) 75 ui -= 0xffff; 76 if (ui == 0xffffff) 77 puts("invalid\n"); 78 else 79 printf("%d\n", ui); 80 } 81 } 82 83 int gsc_info(int verbose) 84 { 85 unsigned char buf[16]; 86 87 i2c_set_bus_num(0); 88 if (gsc_i2c_read(GSC_SC_ADDR, 0, 1, buf, 16)) 89 return CMD_RET_FAILURE; 90 91 printf("GSC: v%d", buf[GSC_SC_FWVER]); 92 printf(" 0x%04x", buf[GSC_SC_FWCRC] | buf[GSC_SC_FWCRC+1]<<8); 93 printf(" WDT:%sabled", (buf[GSC_SC_CTRL1] & (1<<GSC_SC_CTRL1_WDEN)) 94 ? "en" : "dis"); 95 if (buf[GSC_SC_STATUS] & (1 << GSC_SC_IRQ_WATCHDOG)) { 96 buf[GSC_SC_STATUS] &= ~(1 << GSC_SC_IRQ_WATCHDOG); 97 puts(" WDT_RESET"); 98 gsc_i2c_write(GSC_SC_ADDR, GSC_SC_STATUS, 1, 99 &buf[GSC_SC_STATUS], 1); 100 } 101 if (!gsc_i2c_read(GSC_HWMON_ADDR, GSC_HWMON_TEMP, 1, buf, 2)) { 102 int ui = buf[0] | buf[1]<<8; 103 if (ui > 0x8000) 104 ui -= 0xffff; 105 printf(" board temp at %dC", ui / 10); 106 } 107 puts("\n"); 108 if (!verbose) 109 return CMD_RET_SUCCESS; 110 111 read_hwmon("Temp", GSC_HWMON_TEMP, 2); 112 read_hwmon("VIN", GSC_HWMON_VIN, 3); 113 read_hwmon("VBATT", GSC_HWMON_VBATT, 3); 114 read_hwmon("VDD_3P3", GSC_HWMON_VDD_3P3, 3); 115 read_hwmon("VDD_ARM", GSC_HWMON_VDD_CORE, 3); 116 read_hwmon("VDD_SOC", GSC_HWMON_VDD_SOC, 3); 117 read_hwmon("VDD_HIGH", GSC_HWMON_VDD_HIGH, 3); 118 read_hwmon("VDD_DDR", GSC_HWMON_VDD_DDR, 3); 119 read_hwmon("VDD_5P0", GSC_HWMON_VDD_5P0, 3); 120 if (strncasecmp((const char*) ventana_info.model, "GW553", 5)) 121 read_hwmon("VDD_2P5", GSC_HWMON_VDD_2P5, 3); 122 read_hwmon("VDD_1P8", GSC_HWMON_VDD_1P8, 3); 123 read_hwmon("VDD_IO2", GSC_HWMON_VDD_IO2, 3); 124 switch (ventana_info.model[3]) { 125 case '1': /* GW51xx */ 126 read_hwmon("VDD_IO3", GSC_HWMON_VDD_IO4, 3); /* -C rev */ 127 break; 128 case '2': /* GW52xx */ 129 break; 130 case '3': /* GW53xx */ 131 read_hwmon("VDD_IO4", GSC_HWMON_VDD_IO4, 3); /* -C rev */ 132 read_hwmon("VDD_GPS", GSC_HWMON_VDD_IO3, 3); 133 break; 134 case '4': /* GW54xx */ 135 read_hwmon("VDD_IO3", GSC_HWMON_VDD_IO4, 3); /* -C rev */ 136 read_hwmon("VDD_GPS", GSC_HWMON_VDD_IO3, 3); 137 break; 138 case '5': /* GW55xx */ 139 break; 140 case '6': /* GW560x */ 141 read_hwmon("VDD_IO4", GSC_HWMON_VDD_IO4, 3); 142 read_hwmon("VDD_GPS", GSC_HWMON_VDD_IO3, 3); 143 break; 144 } 145 return 0; 146 } 147 148 /* 149 * The Gateworks System Controller implements a boot 150 * watchdog (always enabled) as a workaround for IMX6 boot related 151 * errata such as: 152 * ERR005768 - no fix scheduled 153 * ERR006282 - fixed in silicon r1.2 154 * ERR007117 - fixed in silicon r1.3 155 * ERR007220 - fixed in silicon r1.3 156 * ERR007926 - no fix scheduled 157 * see http://cache.freescale.com/files/32bit/doc/errata/IMX6DQCE.pdf 158 * 159 * Disable the boot watchdog 160 */ 161 int gsc_boot_wd_disable(void) 162 { 163 u8 reg; 164 165 i2c_set_bus_num(CONFIG_I2C_GSC); 166 if (!gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) { 167 reg |= (1 << GSC_SC_CTRL1_WDDIS); 168 if (!gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) 169 return 0; 170 } 171 puts("Error: could not disable GSC Watchdog\n"); 172 return 1; 173 } 174 175 #if defined(CONFIG_CMD_GSC) && !defined(CONFIG_SPL_BUILD) 176 static int do_gsc_sleep(cmd_tbl_t *cmdtp, int flag, int argc, 177 char * const argv[]) 178 { 179 unsigned char reg; 180 unsigned long secs = 0; 181 182 if (argc < 2) 183 return CMD_RET_USAGE; 184 185 secs = simple_strtoul(argv[1], NULL, 10); 186 printf("GSC Sleeping for %ld seconds\n", secs); 187 188 i2c_set_bus_num(0); 189 reg = (secs >> 24) & 0xff; 190 if (gsc_i2c_write(GSC_SC_ADDR, 9, 1, ®, 1)) 191 goto error; 192 reg = (secs >> 16) & 0xff; 193 if (gsc_i2c_write(GSC_SC_ADDR, 8, 1, ®, 1)) 194 goto error; 195 reg = (secs >> 8) & 0xff; 196 if (gsc_i2c_write(GSC_SC_ADDR, 7, 1, ®, 1)) 197 goto error; 198 reg = secs & 0xff; 199 if (gsc_i2c_write(GSC_SC_ADDR, 6, 1, ®, 1)) 200 goto error; 201 if (gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) 202 goto error; 203 reg |= (1 << 2); 204 if (gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) 205 goto error; 206 reg &= ~(1 << 2); 207 reg |= 0x3; 208 if (gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) 209 goto error; 210 211 return CMD_RET_SUCCESS; 212 213 error: 214 printf("i2c error\n"); 215 return CMD_RET_FAILURE; 216 } 217 218 static int do_gsc_wd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 219 { 220 unsigned char reg; 221 222 if (argc < 2) 223 return CMD_RET_USAGE; 224 225 if (strcasecmp(argv[1], "enable") == 0) { 226 int timeout = 0; 227 228 if (argc > 2) 229 timeout = simple_strtoul(argv[2], NULL, 10); 230 i2c_set_bus_num(0); 231 if (gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) 232 return CMD_RET_FAILURE; 233 reg &= ~((1 << GSC_SC_CTRL1_WDEN) | (1 << GSC_SC_CTRL1_WDTIME)); 234 if (timeout == 60) 235 reg |= (1 << GSC_SC_CTRL1_WDTIME); 236 else 237 timeout = 30; 238 reg |= (1 << GSC_SC_CTRL1_WDEN); 239 if (gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) 240 return CMD_RET_FAILURE; 241 printf("GSC Watchdog enabled with timeout=%d seconds\n", 242 timeout); 243 } else if (strcasecmp(argv[1], "disable") == 0) { 244 i2c_set_bus_num(0); 245 if (gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) 246 return CMD_RET_FAILURE; 247 reg &= ~((1 << GSC_SC_CTRL1_WDEN) | (1 << GSC_SC_CTRL1_WDTIME)); 248 if (gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) 249 return CMD_RET_FAILURE; 250 printf("GSC Watchdog disabled\n"); 251 } else { 252 return CMD_RET_USAGE; 253 } 254 return CMD_RET_SUCCESS; 255 } 256 257 static int do_gsc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 258 { 259 if (argc < 2) 260 return gsc_info(1); 261 262 if (strcasecmp(argv[1], "wd") == 0) 263 return do_gsc_wd(cmdtp, flag, --argc, ++argv); 264 else if (strcasecmp(argv[1], "sleep") == 0) 265 return do_gsc_sleep(cmdtp, flag, --argc, ++argv); 266 267 return CMD_RET_USAGE; 268 } 269 270 U_BOOT_CMD( 271 gsc, 4, 1, do_gsc, "GSC configuration", 272 "[wd enable [30|60]]|[wd disable]|[sleep <secs>]\n" 273 ); 274 275 #endif /* CONFIG_CMD_GSC */ 276