1 /* 2 * Copyright (C) 2014 Gateworks Corporation 3 * Author: Tim Harvey <tharvey@gateworks.com> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #include <common.h> 9 #include <errno.h> 10 #include <i2c.h> 11 #include <malloc.h> 12 #include <asm/bitops.h> 13 14 #include "gsc.h" 15 #include "ventana_eeprom.h" 16 17 /* read ventana EEPROM, check for validity, and return baseboard type */ 18 int 19 read_eeprom(int bus, struct ventana_board_info *info) 20 { 21 int i; 22 int chksum; 23 char baseboard; 24 int type; 25 unsigned char *buf = (unsigned char *)info; 26 27 memset(info, 0, sizeof(*info)); 28 29 /* 30 * On a board with a missing/depleted backup battery for GSC, the 31 * board may be ready to probe the GSC before its firmware is 32 * running. We will wait here indefinately for the GSC/EEPROM. 33 */ 34 while (1) { 35 if (0 == i2c_set_bus_num(bus) && 36 0 == i2c_probe(GSC_EEPROM_ADDR)) 37 break; 38 mdelay(1); 39 } 40 41 /* read eeprom config section */ 42 if (gsc_i2c_read(GSC_EEPROM_ADDR, 0x00, 1, buf, sizeof(*info))) { 43 puts("EEPROM: Failed to read EEPROM\n"); 44 return GW_UNKNOWN; 45 } 46 47 /* sanity checks */ 48 if (info->model[0] != 'G' || info->model[1] != 'W') { 49 puts("EEPROM: Invalid Model in EEPROM\n"); 50 return GW_UNKNOWN; 51 } 52 53 /* validate checksum */ 54 for (chksum = 0, i = 0; i < sizeof(*info)-2; i++) 55 chksum += buf[i]; 56 if ((info->chksum[0] != chksum>>8) || 57 (info->chksum[1] != (chksum&0xff))) { 58 puts("EEPROM: Failed EEPROM checksum\n"); 59 return GW_UNKNOWN; 60 } 61 62 /* original GW5400-A prototype */ 63 baseboard = info->model[3]; 64 if (strncasecmp((const char *)info->model, "GW5400-A", 8) == 0) 65 baseboard = '0'; 66 67 switch (baseboard) { 68 case '0': /* original GW5400-A prototype */ 69 type = GW54proto; 70 break; 71 case '1': 72 type = GW51xx; 73 break; 74 case '2': 75 type = GW52xx; 76 break; 77 case '3': 78 type = GW53xx; 79 break; 80 case '4': 81 type = GW54xx; 82 break; 83 case '5': 84 if (info->model[4] == '1') { 85 type = GW551x; 86 break; 87 } else if (info->model[4] == '2') { 88 type = GW552x; 89 break; 90 } 91 /* fall through */ 92 default: 93 printf("EEPROM: Unknown model in EEPROM: %s\n", info->model); 94 type = GW_UNKNOWN; 95 break; 96 } 97 return type; 98 } 99 100 /* list of config bits that the bootloader will remove from dtb if not set */ 101 struct ventana_eeprom_config econfig[] = { 102 { "eth0", "ethernet0", EECONFIG_ETH0 }, 103 { "eth1", "ethernet1", EECONFIG_ETH1 }, 104 { "sata", "ahci0", EECONFIG_SATA }, 105 { "pcie", NULL, EECONFIG_PCIE}, 106 { "lvds0", NULL, EECONFIG_LVDS0 }, 107 { "lvds1", NULL, EECONFIG_LVDS1 }, 108 { "usb0", NULL, EECONFIG_USB0 }, 109 { "usb1", NULL, EECONFIG_USB1 }, 110 { "mmc0", NULL, EECONFIG_SD0 }, 111 { "mmc1", NULL, EECONFIG_SD1 }, 112 { "mmc2", NULL, EECONFIG_SD2 }, 113 { "mmc3", NULL, EECONFIG_SD3 }, 114 { "uart0", NULL, EECONFIG_UART0 }, 115 { "uart1", NULL, EECONFIG_UART1 }, 116 { "uart2", NULL, EECONFIG_UART2 }, 117 { "uart3", NULL, EECONFIG_UART3 }, 118 { "uart4", NULL, EECONFIG_UART4 }, 119 { "ipu0", NULL, EECONFIG_IPU0 }, 120 { "ipu1", NULL, EECONFIG_IPU1 }, 121 { "can0", NULL, EECONFIG_FLEXCAN }, 122 { "i2c0", NULL, EECONFIG_I2C0 }, 123 { "i2c1", NULL, EECONFIG_I2C1 }, 124 { "i2c2", NULL, EECONFIG_I2C2 }, 125 { "vpu", NULL, EECONFIG_VPU }, 126 { "csi0", NULL, EECONFIG_CSI0 }, 127 { "csi1", NULL, EECONFIG_CSI1 }, 128 { "spi0", NULL, EECONFIG_ESPCI0 }, 129 { "spi1", NULL, EECONFIG_ESPCI1 }, 130 { "spi2", NULL, EECONFIG_ESPCI2 }, 131 { "spi3", NULL, EECONFIG_ESPCI3 }, 132 { "spi4", NULL, EECONFIG_ESPCI4 }, 133 { "spi5", NULL, EECONFIG_ESPCI5 }, 134 { "gps", "pps", EECONFIG_GPS }, 135 { "hdmi_in", NULL, EECONFIG_HDMI_IN }, 136 { "hdmi_out", NULL, EECONFIG_HDMI_OUT }, 137 { "cvbs_in", NULL, EECONFIG_VID_IN }, 138 { "cvbs_out", NULL, EECONFIG_VID_OUT }, 139 { "nand", NULL, EECONFIG_NAND }, 140 { /* Sentinel */ } 141 }; 142 143 #ifdef CONFIG_CMD_EECONFIG 144 static struct ventana_eeprom_config *get_config(const char *name) 145 { 146 struct ventana_eeprom_config *cfg = econfig; 147 148 while (cfg->name) { 149 if (0 == strcmp(name, cfg->name)) 150 return cfg; 151 cfg++; 152 } 153 return NULL; 154 } 155 156 static u8 econfig_bytes[sizeof(ventana_info.config)]; 157 static int econfig_init = -1; 158 159 int do_econfig(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 160 { 161 struct ventana_eeprom_config *cfg; 162 struct ventana_board_info *info = &ventana_info; 163 int i; 164 165 if (argc < 2) 166 return CMD_RET_USAGE; 167 168 /* initialize */ 169 if (econfig_init != 1) { 170 memcpy(econfig_bytes, info->config, sizeof(econfig_bytes)); 171 econfig_init = 1; 172 } 173 174 /* list configs */ 175 if ((strncmp(argv[1], "list", 4) == 0)) { 176 cfg = econfig; 177 while (cfg->name) { 178 printf("%s: %d\n", cfg->name, 179 test_bit(cfg->bit, econfig_bytes) ? 1 : 0); 180 cfg++; 181 } 182 } 183 184 /* save */ 185 else if ((strncmp(argv[1], "save", 4) == 0)) { 186 unsigned char *buf = (unsigned char *)info; 187 int chksum; 188 189 /* calculate new checksum */ 190 memcpy(info->config, econfig_bytes, sizeof(econfig_bytes)); 191 for (chksum = 0, i = 0; i < sizeof(*info)-2; i++) 192 chksum += buf[i]; 193 debug("old chksum:0x%04x\n", 194 (info->chksum[0] << 8) | info->chksum[1]); 195 debug("new chksum:0x%04x\n", chksum); 196 info->chksum[0] = chksum >> 8; 197 info->chksum[1] = chksum & 0xff; 198 199 /* write new config data */ 200 if (gsc_i2c_write(GSC_EEPROM_ADDR, info->config - (u8 *)info, 201 1, econfig_bytes, sizeof(econfig_bytes))) { 202 printf("EEPROM: Failed updating config\n"); 203 return CMD_RET_FAILURE; 204 } 205 206 /* write new config data */ 207 if (gsc_i2c_write(GSC_EEPROM_ADDR, info->chksum - (u8 *)info, 208 1, info->chksum, 2)) { 209 printf("EEPROM: Failed updating checksum\n"); 210 return CMD_RET_FAILURE; 211 } 212 213 printf("Config saved to EEPROM\n"); 214 } 215 216 /* get config */ 217 else if (argc == 2) { 218 cfg = get_config(argv[1]); 219 if (cfg) { 220 printf("%s: %d\n", cfg->name, 221 test_bit(cfg->bit, econfig_bytes) ? 1 : 0); 222 } else { 223 printf("invalid config: %s\n", argv[1]); 224 return CMD_RET_FAILURE; 225 } 226 } 227 228 /* set config */ 229 else if (argc == 3) { 230 cfg = get_config(argv[1]); 231 if (cfg) { 232 if (simple_strtol(argv[2], NULL, 10)) { 233 test_and_set_bit(cfg->bit, econfig_bytes); 234 printf("Enabled %s\n", cfg->name); 235 } else { 236 test_and_clear_bit(cfg->bit, econfig_bytes); 237 printf("Disabled %s\n", cfg->name); 238 } 239 } else { 240 printf("invalid config: %s\n", argv[1]); 241 return CMD_RET_FAILURE; 242 } 243 } 244 245 else 246 return CMD_RET_USAGE; 247 248 return CMD_RET_SUCCESS; 249 } 250 251 U_BOOT_CMD( 252 econfig, 3, 0, do_econfig, 253 "EEPROM configuration", 254 "list - list config\n" 255 "save - save config to EEPROM\n" 256 "<name> - get config 'name'\n" 257 "<name> [0|1] - set config 'name' to value\n" 258 ); 259 260 #endif /* CONFIG_CMD_EECONFIG */ 261