xref: /openbmc/u-boot/board/freescale/t4rdb/spl.c (revision 20c700f8)
1 /*
2  * Copyright 2015 Freescale Semiconductor, Inc.
3  *
4  * Author: Chunhe Lan <Chunhe.Lan@freescale.com>
5  *
6  * SPDX-License-Identifier:    GPL-2.0+
7  */
8 
9 #include <common.h>
10 #include <console.h>
11 #include <asm/spl.h>
12 #include <malloc.h>
13 #include <ns16550.h>
14 #include <nand.h>
15 #include <mmc.h>
16 #include <fsl_esdhc.h>
17 #include <i2c.h>
18 
19 #include "t4rdb.h"
20 
21 #define FSL_CORENET_CCSR_PORSR1_RCW_MASK	0xFF800000
22 
23 DECLARE_GLOBAL_DATA_PTR;
24 
25 phys_size_t get_effective_memsize(void)
26 {
27 	return CONFIG_SYS_L3_SIZE;
28 }
29 
30 unsigned long get_board_sys_clk(void)
31 {
32 	return CONFIG_SYS_CLK_FREQ;
33 }
34 
35 unsigned long get_board_ddr_clk(void)
36 {
37 	return CONFIG_DDR_CLK_FREQ;
38 }
39 
40 void board_init_f(ulong bootflag)
41 {
42 	u32 plat_ratio, sys_clk, ccb_clk;
43 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
44 
45 	/* Memcpy existing GD at CONFIG_SPL_GD_ADDR */
46 	memcpy((void *)CONFIG_SPL_GD_ADDR, (void *)gd, sizeof(gd_t));
47 
48 	/* Update GD pointer */
49 	gd = (gd_t *)(CONFIG_SPL_GD_ADDR);
50 
51 	/* compiler optimization barrier needed for GCC >= 3.4 */
52 	__asm__ __volatile__("" : : : "memory");
53 
54 	console_init_f();
55 
56 	/* initialize selected port with appropriate baud rate */
57 	sys_clk = get_board_sys_clk();
58 	plat_ratio = (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
59 	ccb_clk = sys_clk * plat_ratio / 2;
60 
61 	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
62 		     ccb_clk / 16 / CONFIG_BAUDRATE);
63 
64 	puts("\nSD boot...\n");
65 
66 	relocate_code(CONFIG_SPL_RELOC_STACK, (gd_t *)CONFIG_SPL_GD_ADDR, 0x0);
67 }
68 
69 void board_init_r(gd_t *gd, ulong dest_addr)
70 {
71 	bd_t *bd;
72 
73 	bd = (bd_t *)(gd + sizeof(gd_t));
74 	memset(bd, 0, sizeof(bd_t));
75 	gd->bd = bd;
76 	bd->bi_memstart = CONFIG_SYS_INIT_L3_ADDR;
77 	bd->bi_memsize = CONFIG_SYS_L3_SIZE;
78 
79 	probecpu();
80 	get_clocks();
81 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
82 			CONFIG_SPL_RELOC_MALLOC_SIZE);
83 	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
84 
85 	mmc_initialize(bd);
86 	mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
87 			   (uchar *)CONFIG_ENV_ADDR);
88 
89 	gd->env_addr  = (ulong)(CONFIG_ENV_ADDR);
90 	gd->env_valid = 1;
91 
92 	i2c_init_all();
93 
94 	gd->ram_size = initdram(0);
95 
96 	mmc_boot();
97 }
98