xref: /openbmc/u-boot/board/freescale/t4qds/ddr.h (revision baefb63a)
1 /*
2  * Copyright 2013 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef __DDR_H__
8 #define __DDR_H__
9 struct board_specific_parameters {
10 	u32 n_ranks;
11 	u32 datarate_mhz_high;
12 	u32 rank_gb;
13 	u32 clk_adjust;
14 	u32 wrlvl_start;
15 	u32 wrlvl_ctl_2;
16 	u32 wrlvl_ctl_3;
17 	u32 cpo;
18 	u32 write_data_delay;
19 	u32 force_2t;
20 };
21 
22 /*
23  * These tables contain all valid speeds we want to override with board
24  * specific parameters. datarate_mhz_high values need to be in ascending order
25  * for each n_ranks group.
26  */
27 
28 static const struct board_specific_parameters udimm0[] = {
29 	/*
30 	 * memory controller 0
31 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
32 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
33 	 */
34 	{2,  1350, 4,  8,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
35 	{2,  1350, 0, 10,     7, 0x0709090b, 0x0c0c0d09,   0xff,    2,  0},
36 	{2,  1666, 4,  8,     8, 0x080a0a0d, 0x0d10100b,   0xff,    2,  0},
37 	{2,  1666, 0, 10,     7, 0x080a0a0c, 0x0d0d0e0a,   0xff,    2,  0},
38 	{2,  1900, 0,  8,     8, 0x090a0b0e, 0x0f11120c,   0xff,    2,  0},
39 	{2,  2140, 0,  8,     8, 0x090a0b0e, 0x0f11120c,   0xff,    2,  0},
40 	{1,  1350, 0, 10,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
41 	{1,  1700, 0, 10,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
42 	{1,  1900, 0,  8,     8, 0x080a0a0c, 0x0e0e0f0a,   0xff,    2,  0},
43 	{1,  2140, 0,  8,     8, 0x090a0b0c, 0x0e0f100b,   0xff,    2,  0},
44 	{}
45 };
46 
47 static const struct board_specific_parameters rdimm0[] = {
48 	/*
49 	 * memory controller 0
50 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
51 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
52 	 */
53 	{4,  1350, 0, 10,     9, 0x08070605, 0x06070806,   0xff,    2,  0},
54 	{4,  1666, 0, 10,    11, 0x0a080706, 0x07090906,   0xff,    2,  0},
55 	{4,  2140, 0, 10,    12, 0x0b090807, 0x080a0b07,   0xff,    2,  0},
56 	{2,  1350, 0, 10,     9, 0x08070605, 0x06070806,   0xff,    2,  0},
57 	{2,  1666, 0, 10,    11, 0x0a090806, 0x08090a06,   0xff,    2,  0},
58 	{2,  2140, 0, 10,    12, 0x0b090807, 0x080a0b07,   0xff,    2,  0},
59 	{1,  1350, 0, 10,     9, 0x08070605, 0x06070806,   0xff,    2,  0},
60 	{1,  1666, 0, 10,    11, 0x0a090806, 0x08090a06,   0xff,    2,  0},
61 	{1,  2140, 0,  8,    12, 0x0b090807, 0x080a0b07,   0xff,    2,  0},
62 	{}
63 };
64 
65 /*
66  * The three slots have slightly different timing. The center values are good
67  * for all slots. We use identical speed tables for them. In future use, if
68  * DIMMs require separated tables, make more entries as needed.
69  */
70 static const struct board_specific_parameters *udimms[] = {
71 	udimm0,
72 };
73 
74 /*
75  * The three slots have slightly different timing. See comments above.
76  */
77 static const struct board_specific_parameters *rdimms[] = {
78 	rdimm0,
79 };
80 
81 
82 #endif
83