xref: /openbmc/u-boot/board/freescale/t4qds/ddr.h (revision a79854a9)
1 /*
2  * Copyright 2013 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef __DDR_H__
8 #define __DDR_H__
9 struct board_specific_parameters {
10 	u32 n_ranks;
11 	u32 datarate_mhz_high;
12 	u32 rank_gb;
13 	u32 clk_adjust;
14 	u32 wrlvl_start;
15 	u32 wrlvl_ctl_2;
16 	u32 wrlvl_ctl_3;
17 	u32 cpo;
18 	u32 write_data_delay;
19 	u32 force_2t;
20 };
21 
22 /*
23  * These tables contain all valid speeds we want to override with board
24  * specific parameters. datarate_mhz_high values need to be in ascending order
25  * for each n_ranks group.
26  */
27 
28 #ifdef CONFIG_T4240QDS
29 static const struct board_specific_parameters udimm0[] = {
30 	/*
31 	 * memory controller 0
32 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
33 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
34 	 */
35 	{2,  1350, 4, 4,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
36 	{2,  1350, 0, 5,     7, 0x0709090b, 0x0c0c0d09,   0xff,    2,  0},
37 	{2,  1666, 4, 4,     8, 0x080a0a0d, 0x0d10100b,   0xff,    2,  0},
38 	{2,  1666, 0, 5,     7, 0x080a0a0c, 0x0d0d0e0a,   0xff,    2,  0},
39 	{2,  1900, 0, 4,     8, 0x090a0b0e, 0x0f11120c,   0xff,    2,  0},
40 	{2,  2140, 0, 4,     8, 0x090a0b0e, 0x0f11120c,   0xff,    2,  0},
41 	{1,  1350, 0, 5,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
42 	{1,  1700, 0, 5,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
43 	{1,  1900, 0, 4,     8, 0x080a0a0c, 0x0e0e0f0a,   0xff,    2,  0},
44 	{1,  2140, 0, 4,     8, 0x090a0b0c, 0x0e0f100b,   0xff,    2,  0},
45 	{}
46 };
47 
48 static const struct board_specific_parameters rdimm0[] = {
49 	/*
50 	 * memory controller 0
51 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
52 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
53 	 */
54 	{4,  1350, 0, 5,     9, 0x08070605, 0x06070806,   0xff,    2,  0},
55 	{4,  1666, 0, 5,    11, 0x0a080706, 0x07090906,   0xff,    2,  0},
56 	{4,  2140, 0, 5,    12, 0x0b090807, 0x080a0b07,   0xff,    2,  0},
57 	{2,  1350, 0, 5,     9, 0x08070605, 0x06070806,   0xff,    2,  0},
58 	{2,  1666, 0, 5,    11, 0x0a090806, 0x08090a06,   0xff,    2,  0},
59 	{2,  2140, 0, 5,    12, 0x0b090807, 0x080a0b07,   0xff,    2,  0},
60 	{1,  1350, 0, 5,     9, 0x08070605, 0x06070806,   0xff,    2,  0},
61 	{1,  1666, 0, 5,    11, 0x0a090806, 0x08090a06,   0xff,    2,  0},
62 	{1,  2140, 0, 4,    12, 0x0b090807, 0x080a0b07,   0xff,    2,  0},
63 	{}
64 };
65 
66 #else	/* CONFIG_T4240EMU */
67 static const struct board_specific_parameters udimm0[] = {
68 	/*
69 	 * memory controller 0
70 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
71 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
72 	 */
73 	{2,  2140, 0, 4,     8, 0x0, 0x0,   0xff,    2,  0},
74 	{1,  2140, 0, 4,     8, 0x0, 0x0,   0xff,    2,  0},
75 	{}
76 };
77 
78 static const struct board_specific_parameters rdimm0[] = {
79 	/*
80 	 * memory controller 0
81 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
82 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
83 	 */
84 	{4,  2140, 0, 5,     8, 0x0, 0x0,   0xff,    2,  0},
85 	{2,  2140, 0, 5,     8, 0x0, 0x0,   0xff,    2,  0},
86 	{1,  2140, 0, 4,     8, 0x0, 0x0,   0xff,    2,  0},
87 	{}
88 };
89 #endif	/* CONFIG_T4240EMU */
90 
91 /*
92  * The three slots have slightly different timing. The center values are good
93  * for all slots. We use identical speed tables for them. In future use, if
94  * DIMMs require separated tables, make more entries as needed.
95  */
96 static const struct board_specific_parameters *udimms[] = {
97 	udimm0,
98 };
99 
100 /*
101  * The three slots have slightly different timing. See comments above.
102  */
103 static const struct board_specific_parameters *rdimms[] = {
104 	rdimm0,
105 };
106 
107 
108 #endif
109