1 /*
2  * Copyright 2009-2013 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <command.h>
9 #include <i2c.h>
10 #include <netdev.h>
11 #include <linux/compiler.h>
12 #include <asm/mmu.h>
13 #include <asm/processor.h>
14 #include <asm/immap_85xx.h>
15 #include <asm/fsl_law.h>
16 #include <asm/fsl_serdes.h>
17 #include <asm/fsl_liodn.h>
18 #include <fm_eth.h>
19 #include "t208xrdb.h"
20 #include "cpld.h"
21 #include "../common/vid.h"
22 
23 DECLARE_GLOBAL_DATA_PTR;
24 
25 int checkboard(void)
26 {
27 	struct cpu_type *cpu = gd->arch.cpu;
28 	static const char *freq[3] = {"100.00MHZ", "125.00MHz", "156.25MHZ"};
29 
30 	printf("Board: %sRDB, ", cpu->name);
31 	printf("Board rev: 0x%02x CPLD ver: 0x%02x, boot from ",
32 	       CPLD_READ(hw_ver), CPLD_READ(sw_ver));
33 
34 #ifdef CONFIG_SDCARD
35 	puts("SD/MMC\n");
36 #elif CONFIG_SPIFLASH
37 	puts("SPI\n");
38 #else
39 	u8 reg;
40 
41 	reg = CPLD_READ(flash_csr);
42 
43 	if (reg & CPLD_BOOT_SEL) {
44 		puts("NAND\n");
45 	} else {
46 		reg = ((reg & CPLD_LBMAP_MASK) >> CPLD_LBMAP_SHIFT);
47 		printf("NOR vBank%d\n", reg);
48 	}
49 #endif
50 
51 	puts("SERDES Reference Clocks:\n");
52 	printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[2], freq[0]);
53 	printf("SD2_CLK1=%s, SD2_CLK2=%s\n", freq[0], freq[0]);
54 
55 	return 0;
56 }
57 
58 int board_early_init_r(void)
59 {
60 	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
61 	int flash_esel = find_tlb_idx((void *)flashbase, 1);
62 	/*
63 	 * Remap Boot flash + PROMJET region to caching-inhibited
64 	 * so that flash can be erased properly.
65 	 */
66 
67 	/* Flush d-cache and invalidate i-cache of any FLASH data */
68 	flush_dcache();
69 	invalidate_icache();
70 	if (flash_esel == -1) {
71 		/* very unlikely unless something is messed up */
72 		puts("Error: Could not find TLB for FLASH BASE\n");
73 		flash_esel = 2;	/* give our best effort to continue */
74 	} else {
75 		/* invalidate existing TLB entry for flash + promjet */
76 		disable_tlb(flash_esel);
77 	}
78 
79 	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
80 		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
81 		0, flash_esel, BOOKE_PAGESZ_256M, 1);
82 
83 	/*
84 	 * Adjust core voltage according to voltage ID
85 	 * This function changes I2C mux to channel 2.
86 	 */
87 	if (adjust_vdd(0))
88 		printf("Warning: Adjusting core voltage failed.\n");
89 	return 0;
90 }
91 
92 unsigned long get_board_sys_clk(void)
93 {
94 	return CONFIG_SYS_CLK_FREQ;
95 }
96 
97 unsigned long get_board_ddr_clk(void)
98 {
99 	return CONFIG_DDR_CLK_FREQ;
100 }
101 
102 int misc_init_r(void)
103 {
104 	u8 reg;
105 
106 	/* Reset CS4315 PHY */
107 	reg = CPLD_READ(reset_ctl);
108 	reg |= CPLD_RSTCON_EDC_RST;
109 	CPLD_WRITE(reset_ctl, reg);
110 
111 	return 0;
112 }
113 
114 int ft_board_setup(void *blob, bd_t *bd)
115 {
116 	phys_addr_t base;
117 	phys_size_t size;
118 
119 	ft_cpu_setup(blob, bd);
120 
121 	base = env_get_bootm_low();
122 	size = env_get_bootm_size();
123 
124 	fdt_fixup_memory(blob, (u64)base, (u64)size);
125 
126 #ifdef CONFIG_PCI
127 	pci_of_setup(blob, bd);
128 #endif
129 
130 	fdt_fixup_liodn(blob);
131 	fsl_fdt_fixup_dr_usb(blob, bd);
132 
133 #ifdef CONFIG_SYS_DPAA_FMAN
134 	fdt_fixup_fman_ethernet(blob);
135 	fdt_fixup_board_enet(blob);
136 #endif
137 
138 	return 0;
139 }
140