1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <netdev.h> 9 #include <asm/fsl_serdes.h> 10 #include <asm/immap_85xx.h> 11 #include <fm_eth.h> 12 #include <fsl_mdio.h> 13 #include <malloc.h> 14 #include <asm/fsl_dtsec.h> 15 #include <vsc9953.h> 16 17 #include "../common/fman.h" 18 19 int board_eth_init(bd_t *bis) 20 { 21 #ifdef CONFIG_FMAN_ENET 22 struct memac_mdio_info memac_mdio_info; 23 unsigned int i; 24 int phy_addr = 0; 25 #ifdef CONFIG_VSC9953 26 phy_interface_t phy_int; 27 struct mii_dev *bus; 28 #endif 29 30 printf("Initializing Fman\n"); 31 32 memac_mdio_info.regs = 33 (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR; 34 memac_mdio_info.name = DEFAULT_FM_MDIO_NAME; 35 36 /* Register the real 1G MDIO bus */ 37 fm_memac_mdio_init(bis, &memac_mdio_info); 38 39 /* 40 * Program on board RGMII, SGMII PHY addresses. 41 */ 42 for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { 43 int idx = i - FM1_DTSEC1; 44 45 switch (fm_info_get_enet_if(i)) { 46 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1040D4RDB) 47 case PHY_INTERFACE_MODE_SGMII: 48 /* T1040RDB & T1040D4RDB only supports SGMII on 49 * DTSEC3 50 */ 51 fm_info_set_phy_address(FM1_DTSEC3, 52 CONFIG_SYS_SGMII1_PHY_ADDR); 53 break; 54 #endif 55 #ifdef CONFIG_T1042RDB 56 case PHY_INTERFACE_MODE_SGMII: 57 /* T1042RDB doesn't supports SGMII on DTSEC1 & DTSEC2 */ 58 if ((FM1_DTSEC1 == i) || (FM1_DTSEC2 == i)) 59 fm_info_set_phy_address(i, 0); 60 /* T1042RDB only supports SGMII on DTSEC3 */ 61 fm_info_set_phy_address(FM1_DTSEC3, 62 CONFIG_SYS_SGMII1_PHY_ADDR); 63 break; 64 #endif 65 #ifdef CONFIG_T1042D4RDB 66 case PHY_INTERFACE_MODE_SGMII: 67 /* T1042D4RDB supports SGMII on DTSEC1, DTSEC2 68 * & DTSEC3 69 */ 70 if (FM1_DTSEC1 == i) 71 phy_addr = CONFIG_SYS_SGMII1_PHY_ADDR; 72 if (FM1_DTSEC2 == i) 73 phy_addr = CONFIG_SYS_SGMII2_PHY_ADDR; 74 if (FM1_DTSEC3 == i) 75 phy_addr = CONFIG_SYS_SGMII3_PHY_ADDR; 76 fm_info_set_phy_address(i, phy_addr); 77 break; 78 #endif 79 case PHY_INTERFACE_MODE_RGMII: 80 if (FM1_DTSEC4 == i) 81 phy_addr = CONFIG_SYS_RGMII1_PHY_ADDR; 82 if (FM1_DTSEC5 == i) 83 phy_addr = CONFIG_SYS_RGMII2_PHY_ADDR; 84 fm_info_set_phy_address(i, phy_addr); 85 break; 86 case PHY_INTERFACE_MODE_QSGMII: 87 fm_info_set_phy_address(i, 0); 88 break; 89 case PHY_INTERFACE_MODE_NONE: 90 fm_info_set_phy_address(i, 0); 91 break; 92 default: 93 printf("Fman1: DTSEC%u set to unknown interface %i\n", 94 idx + 1, fm_info_get_enet_if(i)); 95 fm_info_set_phy_address(i, 0); 96 break; 97 } 98 if (fm_info_get_enet_if(i) == PHY_INTERFACE_MODE_QSGMII || 99 fm_info_get_enet_if(i) == PHY_INTERFACE_MODE_NONE) 100 fm_info_set_mdio(i, NULL); 101 else 102 fm_info_set_mdio(i, 103 miiphy_get_dev_by_name( 104 DEFAULT_FM_MDIO_NAME)); 105 } 106 107 #ifdef CONFIG_VSC9953 108 /* SerDes configured for QSGMII */ 109 if (serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_A) >= 0) { 110 for (i = 0; i < 4; i++) { 111 bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME); 112 phy_addr = CONFIG_SYS_FM1_QSGMII11_PHY_ADDR + i; 113 phy_int = PHY_INTERFACE_MODE_QSGMII; 114 115 vsc9953_port_info_set_mdio(i, bus); 116 vsc9953_port_info_set_phy_address(i, phy_addr); 117 vsc9953_port_info_set_phy_int(i, phy_int); 118 vsc9953_port_enable(i); 119 } 120 } 121 if (serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_B) >= 0) { 122 for (i = 4; i < 8; i++) { 123 bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME); 124 phy_addr = CONFIG_SYS_FM1_QSGMII21_PHY_ADDR + i - 4; 125 phy_int = PHY_INTERFACE_MODE_QSGMII; 126 127 vsc9953_port_info_set_mdio(i, bus); 128 vsc9953_port_info_set_phy_address(i, phy_addr); 129 vsc9953_port_info_set_phy_int(i, phy_int); 130 vsc9953_port_enable(i); 131 } 132 } 133 134 /* Connect DTSEC1 to L2 switch if it doesn't have a PHY */ 135 if (serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC1) < 0) 136 vsc9953_port_enable(8); 137 138 /* Connect DTSEC2 to L2 switch if it doesn't have a PHY */ 139 if (serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC2) < 0) { 140 /* Enable L2 On MAC2 using SCFG */ 141 struct ccsr_scfg *scfg = (struct ccsr_scfg *) 142 CONFIG_SYS_MPC85xx_SCFG; 143 144 out_be32(&scfg->esgmiiselcr, in_be32(&scfg->esgmiiselcr) | 145 (0x80000000)); 146 vsc9953_port_enable(9); 147 } 148 #endif 149 150 cpu_eth_init(bis); 151 #endif 152 153 return pci_eth_init(bis); 154 } 155