xref: /openbmc/u-boot/board/freescale/t104xrdb/cpld.h (revision 730d2544)
1 /**
2  * Copyright 2013 Freescale Semiconductor
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  *
6  * This file provides support for the ngPIXIS, a board-specific FPGA used on
7  * some Freescale reference boards.
8  */
9 
10 /*
11  * CPLD register set. Feel free to add board-specific #ifdefs where necessary.
12  */
13 struct cpld_data {
14 	u8 cpld_ver;		/* 0x00 - CPLD Major Revision Register */
15 	u8 cpld_ver_sub;	/* 0x01 - CPLD Minor Revision Register */
16 	u8 hw_ver;		/* 0x02 - Hardware Revision Register */
17 	u8 sw_ver;		/* 0x03 - Software Revision register */
18 	u8 res0[12];		/* 0x04 - 0x0F - not used */
19 	u8 reset_ctl1;		/* 0x10 - Reset control Register1 */
20 	u8 reset_ctl2;		/* 0x11 - Reset control Register2 */
21 	u8 int_status;		/* 0x12 - Interrupt status Register */
22 	u8 flash_ctl_status;	/* 0x13 - Flash control and status register */
23 	u8 fan_ctl_status;	/* 0x14 - Fan control and status register  */
24 #if defined(CONFIG_T104XD4RDB)
25 	u8 int_mask;		/* 0x15 - Interrupt mask Register */
26 #else
27 	u8 led_ctl_status;	/* 0x15 - LED control and status register */
28 #endif
29 	u8 sfp_ctl_status;	/* 0x16 - SFP control and status register  */
30 	u8 misc_ctl_status;	/* 0x17 - Miscellanies ctrl & status register*/
31 	u8 boot_override;	/* 0x18 - Boot override register */
32 	u8 boot_config1;	/* 0x19 - Boot config override register*/
33 	u8 boot_config2;	/* 0x1A - Boot config override register*/
34 } cpld_data_t;
35 
36 
37 /* Pointer to the CPLD register set */
38 
39 u8 cpld_read(unsigned int reg);
40 void cpld_write(unsigned int reg, u8 value);
41 
42 #define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg))
43 #define CPLD_WRITE(reg, value)\
44 		cpld_write(offsetof(struct cpld_data, reg), value)
45 #define MISC_CTL_SG_SEL		0x80
46 #define MISC_CTL_AURORA_SEL	0x02
47 #define MISC_MUX_QE_TDM		0xc0
48