1Overview 2-------- 3The T1040RDB is a Freescale reference board that hosts the T1040 SoC 4(and variants). Variants inclued T1042 presonality of T1040, in which 5case T1040RDB can also be called T1042RDB. 6 7The T1042RDB_PI is a Freescale reference board that hosts the T1042 SoC. 8(a personality of T1040 SoC). The board is similar to T1040RDB but is 9designed specially with low power features targeted for Printing Image Market. 10 11T1040 SoC Overview 12------------------ 13The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA 14processor cores with high-performance data path acceleration architecture 15and network peripheral interfaces required for networking & telecommunications. 16 17The T1040/T1042 SoC includes the following function and features: 18 19 - Four e5500 cores, each with a private 256 KB L2 cache 20 - 256 KB shared L3 CoreNet platform cache (CPC) 21 - Interconnect CoreNet platform 22 - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving 23 support 24 - Data Path Acceleration Architecture (DPAA) incorporating acceleration 25 for the following functions: 26 - Packet parsing, classification, and distribution 27 - Queue management for scheduling, packet sequencing, and congestion 28 management 29 - Cryptography Acceleration (SEC 5.0) 30 - RegEx Pattern Matching Acceleration (PME 2.2) 31 - IEEE Std 1588 support 32 - Hardware buffer management for buffer allocation and deallocation 33 - Ethernet interfaces 34 - Integrated 8-port Gigabit Ethernet switch (T1040 only) 35 - Four 1 Gbps Ethernet controllers 36 - Two RGMII interfaces or one RGMII and one MII interfaces 37 - High speed peripheral interfaces 38 - Four PCI Express 2.0 controllers running at up to 5 GHz 39 - Two SATA controllers supporting 1.5 and 3.0 Gb/s operation 40 - Upto two QSGMII interface 41 - Upto six SGMII interface supporting 1000 Mbps 42 - One SGMII interface supporting upto 2500 Mbps 43 - Additional peripheral interfaces 44 - Two USB 2.0 controllers with integrated PHY 45 - SD/eSDHC/eMMC 46 - eSPI controller 47 - Four I2C controllers 48 - Four UARTs 49 - Four GPIO controllers 50 - Integrated flash controller (IFC) 51 - LCD and HDMI interface (DIU) with 12 bit dual data rate 52 - TDM interface 53 - Multicore programmable interrupt controller (PIC) 54 - Two 8-channel DMA engines 55 - Single source clocking implementation 56 - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB) 57 58T1040 SoC Personalities 59------------------------- 60 61T1022 Personality: 62T1022 is a reduced personality of T1040 with less core/clusters. 63 64T1042 Personality: 65T1042 is a reduced personality of T1040 without Integrated 8-port Gigabit 66Ethernet switch. Rest of the blocks are same as T1040 67 68 69T1040RDB board Overview 70------------------------- 71 - SERDES Connections, 8 lanes information: 72 1: None 73 2: SGMII 74 3: QSGMII 75 4: QSGMII 76 5: PCIe1 x1 slot 77 6: mini PCIe connector 78 7: mini PCIe connector 79 8: SATA connector 80 - DDR Controller 81 - Supports rates of up to 1600 MHz data-rate 82 - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types. 83 - IFC/Local Bus 84 - NAND flash: 1GB 8-bit NAND flash 85 - NOR: 128MB 16-bit NOR Flash 86 - Ethernet 87 - Two on-board RGMII 10/100/1G ethernet ports. 88 - CPLD 89 - Clocks 90 - System and DDR clock (SYSCLK, “DDRCLK”) 91 - SERDES clocks 92 - Power Supplies 93 - USB 94 - Supports two USB 2.0 ports with integrated PHYs 95 - Two type A ports with 5V@1.5A per port. 96 - SDHC 97 - SDHC/SDXC connector 98 - SPI 99 - On-board 64MB SPI flash 100 - Other IO 101 - Two Serial ports 102 - Four I2C ports 103 104T1042RDB_PI board Overview 105------------------------- 106 - SERDES Connections, 8 lanes information: 107 1, 2, 3, 4 : PCIe x4 slot 108 5: mini PCIe connector 109 6: mini PCIe connector 110 7: NA 111 8: SATA connector 112 - DDR Controller 113 - Supports rates of up to 1600 MHz data-rate 114 - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types. 115 - IFC/Local Bus 116 - NAND flash: 1GB 8-bit NAND flash 117 - NOR: 128MB 16-bit NOR Flash 118 - Ethernet 119 - Two on-board RGMII 10/100/1G ethernet ports. 120 - CPLD 121 - Clocks 122 - System and DDR clock (SYSCLK, “DDRCLK”) 123 - SERDES clocks 124 - Video 125 - DIU supports video at up to 1280x1024x32bpp 126 - Power Supplies 127 - USB 128 - Supports two USB 2.0 ports with integrated PHYs 129 - Two type A ports with 5V@1.5A per port. 130 - SDHC 131 - SDHC/SDXC connector 132 - SPI 133 - On-board 64MB SPI flash 134 - Other IO 135 - Two Serial ports 136 - Four I2C ports 137 138Memory map 139----------- 140The addresses in brackets are physical addresses. 141 142Start Address End Address Description Size 1430xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB 1440xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB 1450xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB 1460xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB 1470xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB 1480xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB 1490xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB 1500xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB 1510xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB 1520xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB 1530xF_0000_0000 0xF_003F_FFFF DCSR 4MB 1540xC_3000_0000 0xC_3FFF_FFFF PCI Express 4 Mem Space 256MB 1550xC_2000_0000 0xC_2FFF_FFFF PCI Express 3 Mem Space 256MB 1560xC_1000_0000 0xC_1FFF_FFFF PCI Express 2 Mem Space 256MB 1570xC_0000_0000 0xC_0FFF_FFFF PCI Express 1 Mem Space 256MB 1580x0_0000_0000 0x0_ffff_ffff DDR 2GB 159 160 161NOR Flash memory Map 162--------------------- 163 Start End Definition Size 1640xEFF80000 0xEFFFFFFF u-boot (current bank) 512KB 1650xEFF60000 0xEFF7FFFF u-boot env (current bank) 128KB 1660xEFF40000 0xEFF5FFFF FMAN Ucode (current bank) 128KB 1670xED300000 0xEFF3FFFF rootfs (alt bank) 44MB + 256KB 1680xEC800000 0xEC8FFFF Hardware device tree (alt bank) 1MB 1690xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB 1700xEC000000 0xEC01FFFF RCW (alt bank) 128KB 1710xEBF80000 0xEBFFFFFF u-boot (alt bank) 512KB 1720xEBF60000 0xEBF7FFFF u-boot env (alt bank) 128KB 1730xEBF40000 0xEBF5FFFF FMAN ucode (alt bank) 128KB 1740xE9300000 0xEBF3FFFF rootfs (current bank) 44MB + 256KB 1750xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB 1760xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB 1770xE8000000 0xE801FFFF RCW (current bank) 128KB 178 179 180Various Software configurations/environment variables/commands 181-------------------------------------------------------------- 182The below commands apply to the board 183 1841. U-boot environment variable hwconfig 185 The default hwconfig is: 186 hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1: 187 dr_mode=host,phy_type=utmi 188 Note: For USB gadget set "dr_mode=peripheral" 189 1902. FMAN Ucode versions 191 fsl_fman_ucode_t1040.bin 192 1933. Switching to alternate bank 194 Commands for switching to alternate bank. 195 196 1. To change from vbank0 to vbank4 197 => qixis_reset altbank (it will boot using vbank4) 198 199 2.To change from vbank4 to vbank0 200 => qixis reset (it will boot using vbank0) 201