1 /*
2  * Copyright 2013 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <command.h>
9 #include <i2c.h>
10 #include <netdev.h>
11 #include <linux/compiler.h>
12 #include <asm/mmu.h>
13 #include <asm/processor.h>
14 #include <asm/cache.h>
15 #include <asm/immap_85xx.h>
16 #include <asm/fsl_law.h>
17 #include <asm/fsl_serdes.h>
18 #include <asm/fsl_portals.h>
19 #include <asm/fsl_liodn.h>
20 #include <fm_eth.h>
21 
22 #include "../common/qixis.h"
23 #include "t1040qds.h"
24 #include "t1040qds_qixis.h"
25 
26 DECLARE_GLOBAL_DATA_PTR;
27 
28 int checkboard(void)
29 {
30 	char buf[64];
31 	u8 sw;
32 	struct cpu_type *cpu = gd->arch.cpu;
33 	static const char *const freq[] = {"100", "125", "156.25", "161.13",
34 						"122.88", "122.88", "122.88"};
35 	int clock;
36 
37 	printf("Board: %sQDS, ", cpu->name);
38 	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ",
39 	       QIXIS_READ(id), QIXIS_READ(arch));
40 
41 	sw = QIXIS_READ(brdcfg[0]);
42 	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
43 
44 	if (sw < 0x8)
45 		printf("vBank: %d\n", sw);
46 	else if (sw == 0x8)
47 		puts("PromJet\n");
48 	else if (sw == 0x9)
49 		puts("NAND\n");
50 	else if (sw == 0x15)
51 		printf("IFCCard\n");
52 	else
53 		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
54 
55 	printf("FPGA: v%d (%s), build %d",
56 	       (int)QIXIS_READ(scver), qixis_read_tag(buf),
57 	       (int)qixis_read_minor());
58 	/* the timestamp string contains "\n" at the end */
59 	printf(" on %s", qixis_read_time(buf));
60 
61 	/*
62 	 * Display the actual SERDES reference clocks as configured by the
63 	 * dip switches on the board.  Note that the SWx registers could
64 	 * technically be set to force the reference clocks to match the
65 	 * values that the SERDES expects (or vice versa).  For now, however,
66 	 * we just display both values and hope the user notices when they
67 	 * don't match.
68 	 */
69 	puts("SERDES Reference: ");
70 	sw = QIXIS_READ(brdcfg[2]);
71 	clock = (sw >> 6) & 3;
72 	printf("Clock1=%sMHz ", freq[clock]);
73 	clock = (sw >> 4) & 3;
74 	printf("Clock2=%sMHz\n", freq[clock]);
75 
76 	return 0;
77 }
78 
79 int select_i2c_ch_pca9547(u8 ch)
80 {
81 	int ret;
82 
83 	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
84 	if (ret) {
85 		puts("PCA: failed to select proper channel\n");
86 		return ret;
87 	}
88 
89 	return 0;
90 }
91 
92 int board_early_init_r(void)
93 {
94 #ifdef CONFIG_SYS_FLASH_BASE
95 	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
96 	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
97 
98 	/*
99 	 * Remap Boot flash + PROMJET region to caching-inhibited
100 	 * so that flash can be erased properly.
101 	 */
102 
103 	/* Flush d-cache and invalidate i-cache of any FLASH data */
104 	flush_dcache();
105 	invalidate_icache();
106 
107 	/* invalidate existing TLB entry for flash + promjet */
108 	disable_tlb(flash_esel);
109 
110 	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
111 		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
112 		0, flash_esel, BOOKE_PAGESZ_256M, 1);
113 #endif
114 	set_liodns();
115 #ifdef CONFIG_SYS_DPAA_QBMAN
116 	setup_portals();
117 #endif
118 	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
119 
120 	return 0;
121 }
122 
123 unsigned long get_board_sys_clk(void)
124 {
125 	u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
126 
127 	switch (sysclk_conf & 0x0F) {
128 	case QIXIS_SYSCLK_64:
129 		return 64000000;
130 	case QIXIS_SYSCLK_83:
131 		return 83333333;
132 	case QIXIS_SYSCLK_100:
133 		return 100000000;
134 	case QIXIS_SYSCLK_125:
135 		return 125000000;
136 	case QIXIS_SYSCLK_133:
137 		return 133333333;
138 	case QIXIS_SYSCLK_150:
139 		return 150000000;
140 	case QIXIS_SYSCLK_160:
141 		return 160000000;
142 	case QIXIS_SYSCLK_166:
143 		return 166666666;
144 	}
145 	return 66666666;
146 }
147 
148 unsigned long get_board_ddr_clk(void)
149 {
150 	u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
151 
152 	switch ((ddrclk_conf & 0x30) >> 4) {
153 	case QIXIS_DDRCLK_100:
154 		return 100000000;
155 	case QIXIS_DDRCLK_125:
156 		return 125000000;
157 	case QIXIS_DDRCLK_133:
158 		return 133333333;
159 	}
160 	return 66666666;
161 }
162 
163 #define NUM_SRDS_BANKS	2
164 int misc_init_r(void)
165 {
166 	u8 sw;
167 	serdes_corenet_t *srds_regs =
168 		(void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
169 	u32 actual[NUM_SRDS_BANKS] = { 0 };
170 	int i;
171 
172 	sw = QIXIS_READ(brdcfg[2]);
173 	for (i = 0; i < NUM_SRDS_BANKS; i++) {
174 		unsigned int clock = (sw >> (6 - 2 * i)) & 3;
175 		switch (clock) {
176 		case 0:
177 			actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
178 			break;
179 		case 1:
180 			actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
181 			break;
182 		case 2:
183 			actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
184 			break;
185 		}
186 	}
187 
188 	puts("SerDes1");
189 	for (i = 0; i < NUM_SRDS_BANKS; i++) {
190 		u32 pllcr0 = srds_regs->bank[i].pllcr0;
191 		u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
192 		if (expected != actual[i]) {
193 			printf("expects ref clk%d %sMHz, but actual is %sMHz\n",
194 			       i + 1, serdes_clock_to_string(expected),
195 			       serdes_clock_to_string(actual[i]));
196 		}
197 	}
198 
199 	return 0;
200 }
201 
202 void ft_board_setup(void *blob, bd_t *bd)
203 {
204 	phys_addr_t base;
205 	phys_size_t size;
206 
207 	ft_cpu_setup(blob, bd);
208 
209 	base = getenv_bootm_low();
210 	size = getenv_bootm_size();
211 
212 	fdt_fixup_memory(blob, (u64)base, (u64)size);
213 
214 #ifdef CONFIG_PCI
215 	pci_of_setup(blob, bd);
216 #endif
217 
218 	fdt_fixup_liodn(blob);
219 
220 #ifdef CONFIG_HAS_FSL_DR_USB
221 	fdt_fixup_dr_usb(blob, bd);
222 #endif
223 
224 #ifdef CONFIG_SYS_DPAA_FMAN
225 	fdt_fixup_fman_ethernet(blob);
226 #endif
227 }
228 
229 void qixis_dump_switch(void)
230 {
231 	int i, nr_of_cfgsw;
232 
233 	QIXIS_WRITE(cms[0], 0x00);
234 	nr_of_cfgsw = QIXIS_READ(cms[1]);
235 
236 	puts("DIP switch settings dump:\n");
237 	for (i = 1; i <= nr_of_cfgsw; i++) {
238 		QIXIS_WRITE(cms[0], i);
239 		printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
240 	}
241 }
242 
243 int board_need_mem_reset(void)
244 {
245 	return 1;
246 }
247