1 /*
2  * Copyright 2013 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <command.h>
9 #include <i2c.h>
10 #include <netdev.h>
11 #include <linux/compiler.h>
12 #include <asm/mmu.h>
13 #include <asm/processor.h>
14 #include <asm/cache.h>
15 #include <asm/immap_85xx.h>
16 #include <asm/fsl_law.h>
17 #include <asm/fsl_serdes.h>
18 #include <asm/fsl_portals.h>
19 #include <asm/fsl_liodn.h>
20 #include <fm_eth.h>
21 #include <hwconfig.h>
22 
23 #include "../common/sleep.h"
24 #include "../common/qixis.h"
25 #include "t1040qds.h"
26 #include "t1040qds_qixis.h"
27 
28 DECLARE_GLOBAL_DATA_PTR;
29 
30 int checkboard(void)
31 {
32 	char buf[64];
33 	u8 sw;
34 	struct cpu_type *cpu = gd->arch.cpu;
35 	static const char *const freq[] = {"100", "125", "156.25", "161.13",
36 						"122.88", "122.88", "122.88"};
37 	int clock;
38 
39 	printf("Board: %sQDS, ", cpu->name);
40 	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ",
41 	       QIXIS_READ(id), QIXIS_READ(arch));
42 
43 	sw = QIXIS_READ(brdcfg[0]);
44 	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
45 
46 	if (sw < 0x8)
47 		printf("vBank: %d\n", sw);
48 	else if (sw == 0x8)
49 		puts("PromJet\n");
50 	else if (sw == 0x9)
51 		puts("NAND\n");
52 	else if (sw == 0x15)
53 		printf("IFCCard\n");
54 	else
55 		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
56 
57 	printf("FPGA: v%d (%s), build %d",
58 	       (int)QIXIS_READ(scver), qixis_read_tag(buf),
59 	       (int)qixis_read_minor());
60 	/* the timestamp string contains "\n" at the end */
61 	printf(" on %s", qixis_read_time(buf));
62 
63 	/*
64 	 * Display the actual SERDES reference clocks as configured by the
65 	 * dip switches on the board.  Note that the SWx registers could
66 	 * technically be set to force the reference clocks to match the
67 	 * values that the SERDES expects (or vice versa).  For now, however,
68 	 * we just display both values and hope the user notices when they
69 	 * don't match.
70 	 */
71 	puts("SERDES Reference: ");
72 	sw = QIXIS_READ(brdcfg[2]);
73 	clock = (sw >> 6) & 3;
74 	printf("Clock1=%sMHz ", freq[clock]);
75 	clock = (sw >> 4) & 3;
76 	printf("Clock2=%sMHz\n", freq[clock]);
77 
78 	return 0;
79 }
80 
81 int select_i2c_ch_pca9547(u8 ch)
82 {
83 	int ret;
84 
85 	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
86 	if (ret) {
87 		puts("PCA: failed to select proper channel\n");
88 		return ret;
89 	}
90 
91 	return 0;
92 }
93 
94 static void qe_board_setup(void)
95 {
96 	u8 brdcfg15, brdcfg9;
97 
98 	if (hwconfig("qe") && hwconfig("tdm")) {
99 		brdcfg15 = QIXIS_READ(brdcfg[15]);
100 		/*
101 		 * TDMRiser uses QE-TDM
102 		 * Route QE_TDM signals to TDM Riser slot
103 		 */
104 		QIXIS_WRITE(brdcfg[15], brdcfg15 | 7);
105 	} else if (hwconfig("qe") && hwconfig("uart")) {
106 		brdcfg15 = QIXIS_READ(brdcfg[15]);
107 		brdcfg9 = QIXIS_READ(brdcfg[9]);
108 		/*
109 		 * Route QE_TDM signals to UCC
110 		 * ProfiBus controlled by UCC3
111 		 */
112 		brdcfg15 &= 0xfc;
113 		QIXIS_WRITE(brdcfg[15], brdcfg15 | 2);
114 		QIXIS_WRITE(brdcfg[9], brdcfg9 | 4);
115 	}
116 }
117 
118 int board_early_init_f(void)
119 {
120 #if defined(CONFIG_DEEP_SLEEP)
121 	if (is_warm_boot())
122 		fsl_dp_disable_console();
123 #endif
124 
125 	return 0;
126 }
127 
128 int board_early_init_r(void)
129 {
130 #ifdef CONFIG_SYS_FLASH_BASE
131 	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
132 	int flash_esel = find_tlb_idx((void *)flashbase, 1);
133 
134 	/*
135 	 * Remap Boot flash + PROMJET region to caching-inhibited
136 	 * so that flash can be erased properly.
137 	 */
138 
139 	/* Flush d-cache and invalidate i-cache of any FLASH data */
140 	flush_dcache();
141 	invalidate_icache();
142 
143 	if (flash_esel == -1) {
144 		/* very unlikely unless something is messed up */
145 		puts("Error: Could not find TLB for FLASH BASE\n");
146 		flash_esel = 2;	/* give our best effort to continue */
147 	} else {
148 		/* invalidate existing TLB entry for flash + promjet */
149 		disable_tlb(flash_esel);
150 	}
151 
152 	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
153 		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
154 		0, flash_esel, BOOKE_PAGESZ_256M, 1);
155 #endif
156 	set_liodns();
157 #ifdef CONFIG_SYS_DPAA_QBMAN
158 	setup_portals();
159 #endif
160 	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
161 
162 	return 0;
163 }
164 
165 unsigned long get_board_sys_clk(void)
166 {
167 	u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
168 
169 	switch (sysclk_conf & 0x0F) {
170 	case QIXIS_SYSCLK_64:
171 		return 64000000;
172 	case QIXIS_SYSCLK_83:
173 		return 83333333;
174 	case QIXIS_SYSCLK_100:
175 		return 100000000;
176 	case QIXIS_SYSCLK_125:
177 		return 125000000;
178 	case QIXIS_SYSCLK_133:
179 		return 133333333;
180 	case QIXIS_SYSCLK_150:
181 		return 150000000;
182 	case QIXIS_SYSCLK_160:
183 		return 160000000;
184 	case QIXIS_SYSCLK_166:
185 		return 166666666;
186 	}
187 	return 66666666;
188 }
189 
190 unsigned long get_board_ddr_clk(void)
191 {
192 	u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
193 
194 	switch ((ddrclk_conf & 0x30) >> 4) {
195 	case QIXIS_DDRCLK_100:
196 		return 100000000;
197 	case QIXIS_DDRCLK_125:
198 		return 125000000;
199 	case QIXIS_DDRCLK_133:
200 		return 133333333;
201 	}
202 	return 66666666;
203 }
204 
205 #define NUM_SRDS_BANKS	2
206 int misc_init_r(void)
207 {
208 	u8 sw;
209 	serdes_corenet_t *srds_regs =
210 		(void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
211 	u32 actual[NUM_SRDS_BANKS] = { 0 };
212 	int i;
213 
214 	sw = QIXIS_READ(brdcfg[2]);
215 	for (i = 0; i < NUM_SRDS_BANKS; i++) {
216 		unsigned int clock = (sw >> (6 - 2 * i)) & 3;
217 		switch (clock) {
218 		case 0:
219 			actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
220 			break;
221 		case 1:
222 			actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
223 			break;
224 		case 2:
225 			actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
226 			break;
227 		}
228 	}
229 
230 	puts("SerDes1");
231 	for (i = 0; i < NUM_SRDS_BANKS; i++) {
232 		u32 pllcr0 = srds_regs->bank[i].pllcr0;
233 		u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
234 		if (expected != actual[i]) {
235 			printf("expects ref clk%d %sMHz, but actual is %sMHz\n",
236 			       i + 1, serdes_clock_to_string(expected),
237 			       serdes_clock_to_string(actual[i]));
238 		}
239 	}
240 
241 	qe_board_setup();
242 
243 	return 0;
244 }
245 
246 int ft_board_setup(void *blob, bd_t *bd)
247 {
248 	phys_addr_t base;
249 	phys_size_t size;
250 
251 	ft_cpu_setup(blob, bd);
252 
253 	base = getenv_bootm_low();
254 	size = getenv_bootm_size();
255 
256 	fdt_fixup_memory(blob, (u64)base, (u64)size);
257 
258 #ifdef CONFIG_PCI
259 	pci_of_setup(blob, bd);
260 #endif
261 
262 	fdt_fixup_liodn(blob);
263 
264 #ifdef CONFIG_HAS_FSL_DR_USB
265 	fdt_fixup_dr_usb(blob, bd);
266 #endif
267 
268 #ifdef CONFIG_SYS_DPAA_FMAN
269 	fdt_fixup_fman_ethernet(blob);
270 	fdt_fixup_board_enet(blob);
271 #endif
272 
273 	return 0;
274 }
275 
276 void qixis_dump_switch(void)
277 {
278 	int i, nr_of_cfgsw;
279 
280 	QIXIS_WRITE(cms[0], 0x00);
281 	nr_of_cfgsw = QIXIS_READ(cms[1]);
282 
283 	puts("DIP switch settings dump:\n");
284 	for (i = 1; i <= nr_of_cfgsw; i++) {
285 		QIXIS_WRITE(cms[0], i);
286 		printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
287 	}
288 }
289 
290 int board_need_mem_reset(void)
291 {
292 	return 1;
293 }
294