1 /* 2 * Copyright 2013 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <command.h> 9 #include <i2c.h> 10 #include <netdev.h> 11 #include <linux/compiler.h> 12 #include <asm/mmu.h> 13 #include <asm/processor.h> 14 #include <asm/cache.h> 15 #include <asm/immap_85xx.h> 16 #include <asm/fsl_law.h> 17 #include <asm/fsl_serdes.h> 18 #include <asm/fsl_portals.h> 19 #include <asm/fsl_liodn.h> 20 #include <fm_eth.h> 21 22 #include "../common/qixis.h" 23 #include "t1040qds.h" 24 #include "t1040qds_qixis.h" 25 26 DECLARE_GLOBAL_DATA_PTR; 27 28 int checkboard(void) 29 { 30 char buf[64]; 31 u8 sw; 32 struct cpu_type *cpu = gd->arch.cpu; 33 static const char *const freq[] = {"100", "125", "156.25", "161.13", 34 "122.88", "122.88", "122.88"}; 35 int clock; 36 37 printf("Board: %sQDS, ", cpu->name); 38 printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ", 39 QIXIS_READ(id), QIXIS_READ(arch)); 40 41 sw = QIXIS_READ(brdcfg[0]); 42 sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; 43 44 if (sw < 0x8) 45 printf("vBank: %d\n", sw); 46 else if (sw == 0x8) 47 puts("PromJet\n"); 48 else if (sw == 0x9) 49 puts("NAND\n"); 50 else if (sw == 0x15) 51 printf("IFCCard\n"); 52 else 53 printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); 54 55 printf("FPGA: v%d (%s), build %d", 56 (int)QIXIS_READ(scver), qixis_read_tag(buf), 57 (int)qixis_read_minor()); 58 /* the timestamp string contains "\n" at the end */ 59 printf(" on %s", qixis_read_time(buf)); 60 61 /* 62 * Display the actual SERDES reference clocks as configured by the 63 * dip switches on the board. Note that the SWx registers could 64 * technically be set to force the reference clocks to match the 65 * values that the SERDES expects (or vice versa). For now, however, 66 * we just display both values and hope the user notices when they 67 * don't match. 68 */ 69 puts("SERDES Reference: "); 70 sw = QIXIS_READ(brdcfg[2]); 71 clock = (sw >> 6) & 3; 72 printf("Clock1=%sMHz ", freq[clock]); 73 clock = (sw >> 4) & 3; 74 printf("Clock2=%sMHz\n", freq[clock]); 75 76 return 0; 77 } 78 79 int select_i2c_ch_pca9547(u8 ch) 80 { 81 int ret; 82 83 ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); 84 if (ret) { 85 puts("PCA: failed to select proper channel\n"); 86 return ret; 87 } 88 89 return 0; 90 } 91 92 int board_early_init_r(void) 93 { 94 #ifdef CONFIG_SYS_FLASH_BASE 95 const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; 96 const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); 97 98 /* 99 * Remap Boot flash + PROMJET region to caching-inhibited 100 * so that flash can be erased properly. 101 */ 102 103 /* Flush d-cache and invalidate i-cache of any FLASH data */ 104 flush_dcache(); 105 invalidate_icache(); 106 107 /* invalidate existing TLB entry for flash + promjet */ 108 disable_tlb(flash_esel); 109 110 set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, 111 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 112 0, flash_esel, BOOKE_PAGESZ_256M, 1); 113 #endif 114 set_liodns(); 115 #ifdef CONFIG_SYS_DPAA_QBMAN 116 setup_portals(); 117 #endif 118 select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); 119 120 return 0; 121 } 122 123 unsigned long get_board_sys_clk(void) 124 { 125 u8 sysclk_conf = QIXIS_READ(brdcfg[1]); 126 127 switch (sysclk_conf & 0x0F) { 128 case QIXIS_SYSCLK_64: 129 return 64000000; 130 case QIXIS_SYSCLK_83: 131 return 83333333; 132 case QIXIS_SYSCLK_100: 133 return 100000000; 134 case QIXIS_SYSCLK_125: 135 return 125000000; 136 case QIXIS_SYSCLK_133: 137 return 133333333; 138 case QIXIS_SYSCLK_150: 139 return 150000000; 140 case QIXIS_SYSCLK_160: 141 return 160000000; 142 case QIXIS_SYSCLK_166: 143 return 166666666; 144 } 145 return 66666666; 146 } 147 148 unsigned long get_board_ddr_clk(void) 149 { 150 u8 ddrclk_conf = QIXIS_READ(brdcfg[1]); 151 152 switch ((ddrclk_conf & 0x30) >> 4) { 153 case QIXIS_DDRCLK_100: 154 return 100000000; 155 case QIXIS_DDRCLK_125: 156 return 125000000; 157 case QIXIS_DDRCLK_133: 158 return 133333333; 159 } 160 return 66666666; 161 } 162 163 #define NUM_SRDS_BANKS 2 164 int misc_init_r(void) 165 { 166 u8 sw; 167 serdes_corenet_t *srds_regs = 168 (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; 169 u32 actual[NUM_SRDS_BANKS] = { 0 }; 170 int i; 171 172 sw = QIXIS_READ(brdcfg[2]); 173 for (i = 0; i < NUM_SRDS_BANKS; i++) { 174 unsigned int clock = (sw >> (6 - 2 * i)) & 3; 175 switch (clock) { 176 case 0: 177 actual[i] = SRDS_PLLCR0_RFCK_SEL_100; 178 break; 179 case 1: 180 actual[i] = SRDS_PLLCR0_RFCK_SEL_125; 181 break; 182 case 2: 183 actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25; 184 break; 185 } 186 } 187 188 puts("SerDes1"); 189 for (i = 0; i < NUM_SRDS_BANKS; i++) { 190 u32 pllcr0 = srds_regs->bank[i].pllcr0; 191 u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK; 192 if (expected != actual[i]) { 193 printf("expects ref clk%d %sMHz, but actual is %sMHz\n", 194 i + 1, serdes_clock_to_string(expected), 195 serdes_clock_to_string(actual[i])); 196 } 197 } 198 199 return 0; 200 } 201 202 void ft_board_setup(void *blob, bd_t *bd) 203 { 204 phys_addr_t base; 205 phys_size_t size; 206 207 ft_cpu_setup(blob, bd); 208 209 base = getenv_bootm_low(); 210 size = getenv_bootm_size(); 211 212 fdt_fixup_memory(blob, (u64)base, (u64)size); 213 214 #ifdef CONFIG_PCI 215 pci_of_setup(blob, bd); 216 #endif 217 218 fdt_fixup_liodn(blob); 219 220 #ifdef CONFIG_HAS_FSL_DR_USB 221 fdt_fixup_dr_usb(blob, bd); 222 #endif 223 224 #ifdef CONFIG_SYS_DPAA_FMAN 225 fdt_fixup_fman_ethernet(blob); 226 #endif 227 } 228 229 void qixis_dump_switch(void) 230 { 231 int i, nr_of_cfgsw; 232 233 QIXIS_WRITE(cms[0], 0x00); 234 nr_of_cfgsw = QIXIS_READ(cms[1]); 235 236 puts("DIP switch settings dump:\n"); 237 for (i = 1; i <= nr_of_cfgsw; i++) { 238 QIXIS_WRITE(cms[0], i); 239 printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1])); 240 } 241 } 242