1Overview 2-------- 3The T1040QDS is a Freescale reference board that hosts the T1040 SoC 4(and variants). 5 6T1040 SoC Overview 7------------------ 8The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA 9processor cores with high-performance data path acceleration architecture 10and network peripheral interfaces required for networking & telecommunications. 11 12The T1040/T1042 SoC includes the following function and features: 13 14 - Four e5500 cores, each with a private 256 KB L2 cache 15 - 256 KB shared L3 CoreNet platform cache (CPC) 16 - Interconnect CoreNet platform 17 - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving 18 support 19 - Data Path Acceleration Architecture (DPAA) incorporating acceleration 20 for the following functions: 21 - Packet parsing, classification, and distribution 22 - Queue management for scheduling, packet sequencing, and congestion 23 management 24 - Cryptography Acceleration (SEC 5.0) 25 - RegEx Pattern Matching Acceleration (PME 2.2) 26 - IEEE Std 1588 support 27 - Hardware buffer management for buffer allocation and deallocation 28 - Ethernet interfaces 29 - Integrated 8-port Gigabit Ethernet switch (T1040 only) 30 - Four 1 Gbps Ethernet controllers 31 - Two RGMII interfaces or one RGMII and one MII interfaces 32 - High speed peripheral interfaces 33 - Four PCI Express 2.0 controllers running at up to 5 GHz 34 - Two SATA controllers supporting 1.5 and 3.0 Gb/s operation 35 - Upto two QSGMII interface 36 - Upto six SGMII interface supporting 1000 Mbps 37 - One SGMII interface supporting upto 2500 Mbps 38 - Additional peripheral interfaces 39 - Two USB 2.0 controllers with integrated PHY 40 - SD/eSDHC/eMMC 41 - eSPI controller 42 - Four I2C controllers 43 - Four UARTs 44 - Four GPIO controllers 45 - Integrated flash controller (IFC) 46 - LCD and HDMI interface (DIU) with 12 bit dual data rate 47 - TDM interface 48 - Multicore programmable interrupt controller (PIC) 49 - Two 8-channel DMA engines 50 - Single source clocking implementation 51 - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB) 52 53 T1040QDS board Overview 54 ----------------------- 55 - SERDES Connections, 8 lanes supporting: 56 — PCI Express: supporting Gen 1 and Gen 2; 57 — SGMII 58 — QSGMII 59 — SATA 2.0 60 — Aurora debug with dedicated connectors (T1040 only) 61 - DDR Controller 62 - Supports rates of up to 1600 MHz data-rate 63 - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types. 64 -IFC/Local Bus 65 - NAND flash: 8-bit, async, up to 2GB. 66 - NOR: 8-bit or 16-bit, non-multiplexed, up to 512MB 67 - GASIC: Simple (minimal) target within Qixis FPGA 68 - PromJET rapid memory download support 69 - Ethernet 70 - Two on-board RGMII 10/100/1G ethernet ports. 71 - PHY #0 remains powered up during deep-sleep (T1040 only) 72 - QIXIS System Logic FPGA 73 - Clocks 74 - System and DDR clock (SYSCLK, “DDRCLK”) 75 - SERDES clocks 76 - Power Supplies 77 - Video 78 - DIU supports video at up to 1280x1024x32bpp 79 - USB 80 - Supports two USB 2.0 ports with integrated PHYs 81 — Two type A ports with 5V@1.5A per port. 82 — Second port can be converted to OTG mini-AB 83 - SDHC 84 - SDHC port connects directly to an adapter card slot, featuring: 85 - Supporting SD slots for: SD, SDHC (1x, 4x, 8x) and/or MMC 86 — Supporting eMMC memory devices 87 - SPI 88 - On-board support of 3 different devices and sizes 89 - Other IO 90 - Two Serial ports 91 - ProfiBus port 92 - Four I2C ports 93 94Memory map on T1040QDS 95---------------------- 96The addresses in brackets are physical addresses. 97 98Start Address End Address Description Size 990xF_FFDF_0000 0xF_FFDF_0FFF IFC - FPGA 4KB 1000xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB 1010xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB 1020xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB 1030xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB 1040xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB 1050xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB 1060xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB 1070xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB 1080xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB 1090xF_E000_0000 0xF_E7FF_FFFF Promjet 128MB 1100xF_0000_0000 0xF_003F_FFFF DCSR 4MB 1110xC_3000_0000 0xC_3FFF_FFFF PCI Express 4 Mem Space 256MB 1120xC_2000_0000 0xC_2FFF_FFFF PCI Express 3 Mem Space 256MB 1130xC_1000_0000 0xC_1FFF_FFFF PCI Express 2 Mem Space 256MB 1140xC_0000_0000 0xC_0FFF_FFFF PCI Express 1 Mem Space 256MB 1150x0_0000_0000 0x0_ffff_ffff DDR 2GB 116 117 118NOR Flash memory Map on T1040QDS 119-------------------------------- 120 Start End Definition Size 1210xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB 1220xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB 1230xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB 1240xED300000 0xEFEFFFFF rootfs (alt bank) 44MB 1250xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB 1260xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB 1270xEC000000 0xEC01FFFF RCW (alt bank) 128KB 1280xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB 1290xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB 1300xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB 1310xE9300000 0xEBEFFFFF rootfs (current bank) 44MB 1320xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB 1330xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB 1340xE8000000 0xE801FFFF RCW (current bank) 128KB 135 136 137Various Software configurations/environment variables/commands 138-------------------------------------------------------------- 139The below commands apply to T1040QDS 140 1411. U-boot environment variable hwconfig 142 The default hwconfig is: 143 hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1: 144 dr_mode=host,phy_type=utmi 145 Note: For USB gadget set "dr_mode=peripheral" 146 1472. FMAN Ucode versions 148 fsl_fman_ucode_t1040.bin 149 1503. Switching to alternate bank 151 Commands for switching to alternate bank. 152 153 1. To change from vbank0 to vbank4 154 => qixis_reset altbank (it will boot using vbank4) 155 156 2.To change from vbank4 to vbank0 157 => qixis reset (it will boot using vbank0) 158 159T1040 Personality 160-------------------- 161 162T1022 Personality 163-------------------- 164T1022 is a reduced personality of T1040 with less core/clusters. 165 166T1042 Personality 167-------------------- 168T1042 is a reduced personality of T1040 without Integrated 8-port Gigabit 169Ethernet switch. Rest of the blocks are same as T1040 170