1Overview 2-------- 3The T1040QDS is a Freescale reference board that hosts the T1040 SoC 4(and variants). 5 6T1040 SoC Overview 7------------------ 8The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA 9processor cores with high-performance data path acceleration architecture 10and network peripheral interfaces required for networking & telecommunications. 11 12The T1040/T1042 SoC includes the following function and features: 13 14 - Four e5500 cores, each with a private 256 KB L2 cache 15 - 256 KB shared L3 CoreNet platform cache (CPC) 16 - Interconnect CoreNet platform 17 - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving 18 support 19 - Data Path Acceleration Architecture (DPAA) incorporating acceleration 20 for the following functions: 21 - Packet parsing, classification, and distribution 22 - Queue management for scheduling, packet sequencing, and congestion 23 management 24 - Cryptography Acceleration (SEC 5.0) 25 - RegEx Pattern Matching Acceleration (PME 2.2) 26 - IEEE Std 1588 support 27 - Hardware buffer management for buffer allocation and deallocation 28 - Ethernet interfaces 29 - Integrated 8-port Gigabit Ethernet switch (T1040 only) 30 - Four 1 Gbps Ethernet controllers 31 - Two RGMII interfaces or one RGMII and one MII interfaces 32 - High speed peripheral interfaces 33 - Four PCI Express 2.0 controllers running at up to 5 GHz 34 - Two SATA controllers supporting 1.5 and 3.0 Gb/s operation 35 - Upto two QSGMII interface 36 - Upto six SGMII interface supporting 1000 Mbps 37 - One SGMII interface supporting upto 2500 Mbps 38 - Additional peripheral interfaces 39 - Two USB 2.0 controllers with integrated PHY 40 - SD/eSDHC/eMMC 41 - eSPI controller 42 - Four I2C controllers 43 - Four UARTs 44 - Four GPIO controllers 45 - Integrated flash controller (IFC) 46 - LCD and HDMI interface (DIU) with 12 bit dual data rate 47 - TDM interface 48 - Multicore programmable interrupt controller (PIC) 49 - Two 8-channel DMA engines 50 - Single source clocking implementation 51 - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB) 52 53 T1040QDS board Overview 54 ----------------------- 55 - SERDES Connections, 8 lanes supporting: 56 — PCI Express: supporting Gen 1 and Gen 2; 57 — SGMII 58 — QSGMII 59 — SATA 2.0 60 — Aurora debug with dedicated connectors (T1040 only) 61 - DDR Controller 62 - Supports rates of up to 1600 MHz data-rate 63 - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types. 64 -IFC/Local Bus 65 - NAND flash: 8-bit, async, up to 2GB. 66 - NOR: 8-bit or 16-bit, non-multiplexed, up to 512MB 67 - GASIC: Simple (minimal) target within Qixis FPGA 68 - PromJET rapid memory download support 69 - Ethernet 70 - Two on-board RGMII 10/100/1G ethernet ports. 71 - PHY #0 remains powered up during deep-sleep (T1040 only) 72 - QIXIS System Logic FPGA 73 - Clocks 74 - System and DDR clock (SYSCLK, “DDRCLK”) 75 - SERDES clocks 76 - Power Supplies 77 - Video 78 - DIU supports video at up to 1280x1024x32bpp 79 - USB 80 - Supports two USB 2.0 ports with integrated PHYs 81 — Two type A ports with 5V@1.5A per port. 82 — Second port can be converted to OTG mini-AB 83 - SDHC 84 - SDHC port connects directly to an adapter card slot, featuring: 85 - Supporting SD slots for: SD, SDHC (1x, 4x, 8x) and/or MMC 86 — Supporting eMMC memory devices 87 - SPI 88 - On-board support of 3 different devices and sizes 89 - Other IO 90 - Two Serial ports 91 - ProfiBus port 92 - Four I2C ports 93 94Memory map on T1040QDS 95---------------------- 96The addresses in brackets are physical addresses. 97 98Start Address End Address Description Size 990xF_FFDF_0000 0xF_FFDF_0FFF IFC - FPGA 4KB 1000xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB 1010xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB 1020xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB 1030xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB 1040xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB 1050xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB 1060xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB 1070xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB 1080xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB 1090xF_E000_0000 0xF_E7FF_FFFF Promjet 128MB 1100xF_0000_0000 0xF_003F_FFFF DCSR 4MB 1110xC_3000_0000 0xC_3FFF_FFFF PCI Express 4 Mem Space 256MB 1120xC_2000_0000 0xC_2FFF_FFFF PCI Express 3 Mem Space 256MB 1130xC_1000_0000 0xC_1FFF_FFFF PCI Express 2 Mem Space 256MB 1140xC_0000_0000 0xC_0FFF_FFFF PCI Express 1 Mem Space 256MB 1150x0_0000_0000 0x0_ffff_ffff DDR 2GB 116 117 118NOR Flash memory Map on T1040QDS 119-------------------------------- 120 Start End Definition Size 1210xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB 1220xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB 1230xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB 1240xED300000 0xEFF3FFFF rootfs (alt bank) 44MB + 256KB 1250xEC800000 0xEC8FFFF Hardware device tree (alt bank) 1MB 1260xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB 1270xEC000000 0xEC01FFFF RCW (alt bank) 128KB 1280xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB 1290xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB 1300xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB 1310xE9300000 0xEBF3FFFF rootfs (current bank) 44MB + 256KB 1320xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB 1330xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB 1340xE8000000 0xE801FFFF RCW (current bank) 128KB 135 136 137Various Software configurations/environment variables/commands 138-------------------------------------------------------------- 139The below commands apply to T1040QDS 140 1411. U-boot environment variable hwconfig 142 The default hwconfig is: 143 hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1: 144 dr_mode=host,phy_type=utmi 145 Note: For USB gadget set "dr_mode=peripheral" 146 1472. FMAN Ucode versions 148 fsl_fman_ucode_t1040.bin 149 1503. Switching to alternate bank 151 Commands for switching to alternate bank. 152 153 1. To change from vbank0 to vbank4 154 => qixis_reset altbank (it will boot using vbank4) 155 156 2.To change from vbank4 to vbank0 157 => qixis reset (it will boot using vbank0) 158 159T1040 Personality 160-------------------- 161 162T1022 Personality 163-------------------- 164T1022 is a reduced personality of T1040 with less core/clusters. 165 166T1042 Personality 167-------------------- 168T1042 is a reduced personality of T1040 without Integrated 8-port Gigabit 169Ethernet switch. Rest of the blocks are same as T1040 170