1 /*
2  * Copyright 2014 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <command.h>
9 #include <i2c.h>
10 #include <netdev.h>
11 #include <linux/compiler.h>
12 #include <asm/mmu.h>
13 #include <asm/processor.h>
14 #include <asm/cache.h>
15 #include <asm/immap_85xx.h>
16 #include <asm/fsl_law.h>
17 #include <asm/fsl_serdes.h>
18 #include <asm/fsl_portals.h>
19 #include <asm/fsl_liodn.h>
20 #include <fm_eth.h>
21 #include <hwconfig.h>
22 #include "../common/qixis.h"
23 #include "t102xqds.h"
24 #include "t102xqds_qixis.h"
25 #include "../common/sleep.h"
26 
27 DECLARE_GLOBAL_DATA_PTR;
28 
29 int checkboard(void)
30 {
31 	char buf[64];
32 	struct cpu_type *cpu = gd->arch.cpu;
33 	static const char *const freq[] = {"100", "125", "156.25", "100.0"};
34 	int clock;
35 	u8 sw = QIXIS_READ(arch);
36 
37 	printf("Board: %sQDS, ", cpu->name);
38 	printf("Sys ID: 0x%02x, Board Arch: V%d, ", QIXIS_READ(id), sw >> 4);
39 	printf("Board Version: %c, boot from ", (sw & 0xf) + 'A' - 1);
40 
41 #ifdef CONFIG_SDCARD
42 	puts("SD/MMC\n");
43 #elif CONFIG_SPIFLASH
44 	puts("SPI\n");
45 #else
46 	sw = QIXIS_READ(brdcfg[0]);
47 	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
48 
49 	if (sw < 0x8)
50 		printf("vBank: %d\n", sw);
51 	else if (sw == 0x8)
52 		puts("PromJet\n");
53 	else if (sw == 0x9)
54 		puts("NAND\n");
55 	else if (sw == 0x15)
56 		printf("IFC Card\n");
57 	else
58 		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
59 #endif
60 
61 	printf("FPGA: v%d (%s), build %d",
62 	       (int)QIXIS_READ(scver), qixis_read_tag(buf),
63 	       (int)qixis_read_minor());
64 	/* the timestamp string contains "\n" at the end */
65 	printf(" on %s", qixis_read_time(buf));
66 
67 	puts("SERDES Reference: ");
68 	sw = QIXIS_READ(brdcfg[2]);
69 	clock = (sw >> 6) & 3;
70 	printf("Clock1=%sMHz ", freq[clock]);
71 	clock = (sw >> 4) & 3;
72 	printf("Clock2=%sMHz\n", freq[clock]);
73 
74 	return 0;
75 }
76 
77 int select_i2c_ch_pca9547(u8 ch)
78 {
79 	int ret;
80 
81 	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
82 	if (ret) {
83 		puts("PCA: failed to select proper channel\n");
84 		return ret;
85 	}
86 
87 	return 0;
88 }
89 
90 static int board_mux_lane_to_slot(void)
91 {
92 	ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
93 	u32 srds_prtcl_s1;
94 	u8 brdcfg9;
95 
96 	srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
97 				FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
98 	srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
99 
100 
101 	brdcfg9 = QIXIS_READ(brdcfg[9]);
102 	QIXIS_WRITE(brdcfg[9], brdcfg9 | BRDCFG9_XFI_TX_DISABLE);
103 
104 	switch (srds_prtcl_s1) {
105 	case 0:
106 		/* SerDes1 is not enabled */
107 		break;
108 	case 0xd5:
109 	case 0x5b:
110 	case 0x6b:
111 	case 0x77:
112 	case 0x6f:
113 	case 0x7f:
114 		QIXIS_WRITE(brdcfg[12], 0x8c);
115 		break;
116 	case 0x40:
117 		QIXIS_WRITE(brdcfg[12], 0xfc);
118 		break;
119 	case 0xd6:
120 	case 0x5a:
121 	case 0x6a:
122 	case 0x56:
123 		QIXIS_WRITE(brdcfg[12], 0x88);
124 		break;
125 	case 0x47:
126 		QIXIS_WRITE(brdcfg[12], 0xcc);
127 		break;
128 	case 0x46:
129 		QIXIS_WRITE(brdcfg[12], 0xc8);
130 		break;
131 	case 0x95:
132 	case 0x99:
133 		brdcfg9 &= ~BRDCFG9_XFI_TX_DISABLE;
134 		QIXIS_WRITE(brdcfg[9], brdcfg9);
135 		QIXIS_WRITE(brdcfg[12], 0x8c);
136 		break;
137 	case 0x116:
138 		QIXIS_WRITE(brdcfg[12], 0x00);
139 		break;
140 	case 0x115:
141 	case 0x119:
142 	case 0x129:
143 	case 0x12b:
144 		/* Aurora, PCIe, SGMII, SATA */
145 		QIXIS_WRITE(brdcfg[12], 0x04);
146 		break;
147 	default:
148 		printf("WARNING: unsupported for SerDes Protocol %d\n",
149 		       srds_prtcl_s1);
150 		return -1;
151 	}
152 
153 	return 0;
154 }
155 
156 #ifdef CONFIG_PPC_T1024
157 static void board_mux_setup(void)
158 {
159 	u8 brdcfg15;
160 
161 	brdcfg15 = QIXIS_READ(brdcfg[15]);
162 	brdcfg15 &= ~BRDCFG15_DIUSEL_MASK;
163 
164 	if (hwconfig_arg_cmp("pin_mux", "tdm")) {
165 		/* Route QE_TDM multiplexed signals to TDM Riser slot */
166 		QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_TDM);
167 		QIXIS_WRITE(brdcfg[13], BRDCFG13_TDM_INTERFACE << 2);
168 		QIXIS_WRITE(brdcfg[5], (QIXIS_READ(brdcfg[5]) &
169 			    ~BRDCFG5_SPIRTE_MASK) | BRDCFG5_SPIRTE_TDM);
170 	} else if (hwconfig_arg_cmp("pin_mux", "ucc")) {
171 		/* to UCC (ProfiBus) interface */
172 		QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_UCC);
173 	} else if (hwconfig_arg_cmp("pin_mux", "hdmi")) {
174 		/* to DVI (HDMI) encoder */
175 		QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_HDMI);
176 	} else if (hwconfig_arg_cmp("pin_mux", "lcd")) {
177 		/* to DFP (LCD) encoder */
178 		QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_LCDFM |
179 			    BRDCFG15_LCDPD | BRDCFG15_DIUSEL_LCD);
180 	}
181 
182 	if (hwconfig_arg_cmp("adaptor", "sdxc"))
183 		/* Route SPI_CS multiplexed signals to SD slot */
184 		QIXIS_WRITE(brdcfg[5], (QIXIS_READ(brdcfg[5]) &
185 			    ~BRDCFG5_SPIRTE_MASK) | BRDCFG5_SPIRTE_SDHC);
186 }
187 #endif
188 
189 void board_retimer_ds125df111_init(void)
190 {
191 	u8 reg;
192 
193 	/* Retimer DS125DF111 is connected to I2C1_CH7_CH5 */
194 	reg = I2C_MUX_CH7;
195 	i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &reg, 1);
196 	reg = I2C_MUX_CH5;
197 	i2c_write(I2C_MUX_PCA_ADDR_SEC, 0, 1, &reg, 1);
198 
199 	/* Access to Control/Shared register */
200 	reg = 0x0;
201 	i2c_write(I2C_RETIMER_ADDR, 0xff, 1, &reg, 1);
202 
203 	/* Read device revision and ID */
204 	i2c_read(I2C_RETIMER_ADDR, 1, 1, &reg, 1);
205 	debug("Retimer version id = 0x%x\n", reg);
206 
207 	/* Enable Broadcast */
208 	reg = 0x0c;
209 	i2c_write(I2C_RETIMER_ADDR, 0xff, 1, &reg, 1);
210 
211 	/* Reset Channel Registers */
212 	i2c_read(I2C_RETIMER_ADDR, 0, 1, &reg, 1);
213 	reg |= 0x4;
214 	i2c_write(I2C_RETIMER_ADDR, 0, 1, &reg, 1);
215 
216 	/* Enable override divider select and Enable Override Output Mux */
217 	i2c_read(I2C_RETIMER_ADDR, 9, 1, &reg, 1);
218 	reg |= 0x24;
219 	i2c_write(I2C_RETIMER_ADDR, 9, 1, &reg, 1);
220 
221 	/* Select VCO Divider to full rate (000) */
222 	i2c_read(I2C_RETIMER_ADDR, 0x18, 1, &reg, 1);
223 	reg &= 0x8f;
224 	i2c_write(I2C_RETIMER_ADDR, 0x18, 1, &reg, 1);
225 
226 	/* Select active PFD MUX input as re-timed data (001) */
227 	i2c_read(I2C_RETIMER_ADDR, 0x1e, 1, &reg, 1);
228 	reg &= 0x3f;
229 	reg |= 0x20;
230 	i2c_write(I2C_RETIMER_ADDR, 0x1e, 1, &reg, 1);
231 
232 	/* Set data rate as 10.3125 Gbps */
233 	reg = 0x0;
234 	i2c_write(I2C_RETIMER_ADDR, 0x60, 1, &reg, 1);
235 	reg = 0xb2;
236 	i2c_write(I2C_RETIMER_ADDR, 0x61, 1, &reg, 1);
237 	reg = 0x90;
238 	i2c_write(I2C_RETIMER_ADDR, 0x62, 1, &reg, 1);
239 	reg = 0xb3;
240 	i2c_write(I2C_RETIMER_ADDR, 0x63, 1, &reg, 1);
241 	reg = 0xcd;
242 	i2c_write(I2C_RETIMER_ADDR, 0x64, 1, &reg, 1);
243 }
244 
245 int board_early_init_f(void)
246 {
247 #if defined(CONFIG_DEEP_SLEEP)
248 	if (is_warm_boot())
249 		fsl_dp_disable_console();
250 #endif
251 
252 	return 0;
253 }
254 
255 int board_early_init_r(void)
256 {
257 #ifdef CONFIG_SYS_FLASH_BASE
258 	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
259 	int flash_esel = find_tlb_idx((void *)flashbase, 1);
260 
261 	/*
262 	 * Remap Boot flash + PROMJET region to caching-inhibited
263 	 * so that flash can be erased properly.
264 	 */
265 
266 	/* Flush d-cache and invalidate i-cache of any FLASH data */
267 	flush_dcache();
268 	invalidate_icache();
269 
270 	if (flash_esel == -1) {
271 		/* very unlikely unless something is messed up */
272 		puts("Error: Could not find TLB for FLASH BASE\n");
273 		flash_esel = 2; /* give our best effort to continue */
274 	} else {
275 		/* invalidate existing TLB entry for flash + promjet */
276 		disable_tlb(flash_esel);
277 	}
278 
279 	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
280 		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
281 		0, flash_esel, BOOKE_PAGESZ_256M, 1);
282 #endif
283 	set_liodns();
284 #ifdef CONFIG_SYS_DPAA_QBMAN
285 	setup_portals();
286 #endif
287 	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
288 	board_mux_lane_to_slot();
289 	board_retimer_ds125df111_init();
290 
291 	/* Increase IO drive strength to address FCS error on RGMII */
292 	out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR, 0xbfdb7800);
293 
294 	return 0;
295 }
296 
297 unsigned long get_board_sys_clk(void)
298 {
299 	u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
300 
301 	switch (sysclk_conf & 0x0F) {
302 	case QIXIS_SYSCLK_64:
303 		return 64000000;
304 	case QIXIS_SYSCLK_83:
305 		return 83333333;
306 	case QIXIS_SYSCLK_100:
307 		return 100000000;
308 	case QIXIS_SYSCLK_125:
309 		return 125000000;
310 	case QIXIS_SYSCLK_133:
311 		return 133333333;
312 	case QIXIS_SYSCLK_150:
313 		return 150000000;
314 	case QIXIS_SYSCLK_160:
315 		return 160000000;
316 	case QIXIS_SYSCLK_166:
317 		return 166666666;
318 	}
319 	return 66666666;
320 }
321 
322 unsigned long get_board_ddr_clk(void)
323 {
324 	u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
325 
326 	switch ((ddrclk_conf & 0x30) >> 4) {
327 	case QIXIS_DDRCLK_100:
328 		return 100000000;
329 	case QIXIS_DDRCLK_125:
330 		return 125000000;
331 	case QIXIS_DDRCLK_133:
332 		return 133333333;
333 	}
334 	return 66666666;
335 }
336 
337 #define NUM_SRDS_PLL	2
338 int misc_init_r(void)
339 {
340 #ifdef CONFIG_PPC_T1024
341 	board_mux_setup();
342 #endif
343 	return 0;
344 }
345 
346 void fdt_fixup_spi_mux(void *blob)
347 {
348 	int nodeoff = 0;
349 
350 	if (hwconfig_arg_cmp("pin_mux", "tdm")) {
351 		while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
352 			"eon,en25s64")) >= 0) {
353 			fdt_del_node(blob, nodeoff);
354 		}
355 	} else {
356 		/* remove tdm node */
357 		while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
358 			"maxim,ds26522")) >= 0) {
359 			fdt_del_node(blob, nodeoff);
360 		}
361 	}
362 }
363 
364 int ft_board_setup(void *blob, bd_t *bd)
365 {
366 	phys_addr_t base;
367 	phys_size_t size;
368 
369 	ft_cpu_setup(blob, bd);
370 
371 	base = getenv_bootm_low();
372 	size = getenv_bootm_size();
373 
374 	fdt_fixup_memory(blob, (u64)base, (u64)size);
375 
376 #ifdef CONFIG_PCI
377 	pci_of_setup(blob, bd);
378 #endif
379 
380 	fdt_fixup_liodn(blob);
381 
382 #ifdef CONFIG_HAS_FSL_DR_USB
383 	fdt_fixup_dr_usb(blob, bd);
384 #endif
385 
386 #ifdef CONFIG_SYS_DPAA_FMAN
387 	fdt_fixup_fman_ethernet(blob);
388 	fdt_fixup_board_enet(blob);
389 #endif
390 	fdt_fixup_spi_mux(blob);
391 
392 	return 0;
393 }
394 
395 void qixis_dump_switch(void)
396 {
397 	int i, nr_of_cfgsw;
398 
399 	QIXIS_WRITE(cms[0], 0x00);
400 	nr_of_cfgsw = QIXIS_READ(cms[1]);
401 
402 	puts("DIP switch settings dump:\n");
403 	for (i = 1; i <= nr_of_cfgsw; i++) {
404 		QIXIS_WRITE(cms[0], i);
405 		printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
406 	}
407 }
408