1 /*
2  * Copyright 2014 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <command.h>
9 #include <i2c.h>
10 #include <netdev.h>
11 #include <linux/compiler.h>
12 #include <asm/mmu.h>
13 #include <asm/processor.h>
14 #include <asm/cache.h>
15 #include <asm/immap_85xx.h>
16 #include <asm/fsl_law.h>
17 #include <asm/fsl_serdes.h>
18 #include <asm/fsl_liodn.h>
19 #include <fm_eth.h>
20 #include <hwconfig.h>
21 #include "../common/qixis.h"
22 #include "t102xqds.h"
23 #include "t102xqds_qixis.h"
24 #include "../common/sleep.h"
25 
26 DECLARE_GLOBAL_DATA_PTR;
27 
28 int checkboard(void)
29 {
30 	char buf[64];
31 	struct cpu_type *cpu = gd->arch.cpu;
32 	static const char *const freq[] = {"100", "125", "156.25", "100.0"};
33 	int clock;
34 	u8 sw = QIXIS_READ(arch);
35 
36 	printf("Board: %sQDS, ", cpu->name);
37 	printf("Sys ID: 0x%02x, Board Arch: V%d, ", QIXIS_READ(id), sw >> 4);
38 	printf("Board Version: %c, boot from ", (sw & 0xf) + 'A' - 1);
39 
40 #ifdef CONFIG_SDCARD
41 	puts("SD/MMC\n");
42 #elif CONFIG_SPIFLASH
43 	puts("SPI\n");
44 #else
45 	sw = QIXIS_READ(brdcfg[0]);
46 	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
47 
48 	if (sw < 0x8)
49 		printf("vBank: %d\n", sw);
50 	else if (sw == 0x8)
51 		puts("PromJet\n");
52 	else if (sw == 0x9)
53 		puts("NAND\n");
54 	else if (sw == 0x15)
55 		printf("IFC Card\n");
56 	else
57 		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
58 #endif
59 
60 	printf("FPGA: v%d (%s), build %d",
61 	       (int)QIXIS_READ(scver), qixis_read_tag(buf),
62 	       (int)qixis_read_minor());
63 	/* the timestamp string contains "\n" at the end */
64 	printf(" on %s", qixis_read_time(buf));
65 
66 	puts("SERDES Reference: ");
67 	sw = QIXIS_READ(brdcfg[2]);
68 	clock = (sw >> 6) & 3;
69 	printf("Clock1=%sMHz ", freq[clock]);
70 	clock = (sw >> 4) & 3;
71 	printf("Clock2=%sMHz\n", freq[clock]);
72 
73 	return 0;
74 }
75 
76 int select_i2c_ch_pca9547(u8 ch)
77 {
78 	int ret;
79 
80 	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
81 	if (ret) {
82 		puts("PCA: failed to select proper channel\n");
83 		return ret;
84 	}
85 
86 	return 0;
87 }
88 
89 static int board_mux_lane_to_slot(void)
90 {
91 	ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
92 	u32 srds_prtcl_s1;
93 	u8 brdcfg9;
94 
95 	srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
96 				FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
97 	srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
98 
99 
100 	brdcfg9 = QIXIS_READ(brdcfg[9]);
101 	QIXIS_WRITE(brdcfg[9], brdcfg9 | BRDCFG9_XFI_TX_DISABLE);
102 
103 	switch (srds_prtcl_s1) {
104 	case 0:
105 		/* SerDes1 is not enabled */
106 		break;
107 	case 0xd5:
108 	case 0x5b:
109 	case 0x6b:
110 	case 0x77:
111 	case 0x6f:
112 	case 0x7f:
113 		QIXIS_WRITE(brdcfg[12], 0x8c);
114 		break;
115 	case 0x40:
116 		QIXIS_WRITE(brdcfg[12], 0xfc);
117 		break;
118 	case 0xd6:
119 	case 0x5a:
120 	case 0x6a:
121 	case 0x56:
122 		QIXIS_WRITE(brdcfg[12], 0x88);
123 		break;
124 	case 0x47:
125 		QIXIS_WRITE(brdcfg[12], 0xcc);
126 		break;
127 	case 0x46:
128 		QIXIS_WRITE(brdcfg[12], 0xc8);
129 		break;
130 	case 0x95:
131 	case 0x99:
132 		brdcfg9 &= ~BRDCFG9_XFI_TX_DISABLE;
133 		QIXIS_WRITE(brdcfg[9], brdcfg9);
134 		QIXIS_WRITE(brdcfg[12], 0x8c);
135 		break;
136 	case 0x116:
137 		QIXIS_WRITE(brdcfg[12], 0x00);
138 		break;
139 	case 0x115:
140 	case 0x119:
141 	case 0x129:
142 	case 0x12b:
143 		/* Aurora, PCIe, SGMII, SATA */
144 		QIXIS_WRITE(brdcfg[12], 0x04);
145 		break;
146 	default:
147 		printf("WARNING: unsupported for SerDes Protocol %d\n",
148 		       srds_prtcl_s1);
149 		return -1;
150 	}
151 
152 	return 0;
153 }
154 
155 #ifdef CONFIG_ARCH_T1024
156 static void board_mux_setup(void)
157 {
158 	u8 brdcfg15;
159 
160 	brdcfg15 = QIXIS_READ(brdcfg[15]);
161 	brdcfg15 &= ~BRDCFG15_DIUSEL_MASK;
162 
163 	if (hwconfig_arg_cmp("pin_mux", "tdm")) {
164 		/* Route QE_TDM multiplexed signals to TDM Riser slot */
165 		QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_TDM);
166 		QIXIS_WRITE(brdcfg[13], BRDCFG13_TDM_INTERFACE << 2);
167 		QIXIS_WRITE(brdcfg[5], (QIXIS_READ(brdcfg[5]) &
168 			    ~BRDCFG5_SPIRTE_MASK) | BRDCFG5_SPIRTE_TDM);
169 	} else if (hwconfig_arg_cmp("pin_mux", "ucc")) {
170 		/* to UCC (ProfiBus) interface */
171 		QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_UCC);
172 	} else if (hwconfig_arg_cmp("pin_mux", "hdmi")) {
173 		/* to DVI (HDMI) encoder */
174 		QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_HDMI);
175 	} else if (hwconfig_arg_cmp("pin_mux", "lcd")) {
176 		/* to DFP (LCD) encoder */
177 		QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_LCDFM |
178 			    BRDCFG15_LCDPD | BRDCFG15_DIUSEL_LCD);
179 	}
180 
181 	if (hwconfig_arg_cmp("adaptor", "sdxc"))
182 		/* Route SPI_CS multiplexed signals to SD slot */
183 		QIXIS_WRITE(brdcfg[5], (QIXIS_READ(brdcfg[5]) &
184 			    ~BRDCFG5_SPIRTE_MASK) | BRDCFG5_SPIRTE_SDHC);
185 }
186 #endif
187 
188 void board_retimer_ds125df111_init(void)
189 {
190 	u8 reg;
191 
192 	/* Retimer DS125DF111 is connected to I2C1_CH7_CH5 */
193 	reg = I2C_MUX_CH7;
194 	i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &reg, 1);
195 	reg = I2C_MUX_CH5;
196 	i2c_write(I2C_MUX_PCA_ADDR_SEC, 0, 1, &reg, 1);
197 
198 	/* Access to Control/Shared register */
199 	reg = 0x0;
200 	i2c_write(I2C_RETIMER_ADDR, 0xff, 1, &reg, 1);
201 
202 	/* Read device revision and ID */
203 	i2c_read(I2C_RETIMER_ADDR, 1, 1, &reg, 1);
204 	debug("Retimer version id = 0x%x\n", reg);
205 
206 	/* Enable Broadcast */
207 	reg = 0x0c;
208 	i2c_write(I2C_RETIMER_ADDR, 0xff, 1, &reg, 1);
209 
210 	/* Reset Channel Registers */
211 	i2c_read(I2C_RETIMER_ADDR, 0, 1, &reg, 1);
212 	reg |= 0x4;
213 	i2c_write(I2C_RETIMER_ADDR, 0, 1, &reg, 1);
214 
215 	/* Enable override divider select and Enable Override Output Mux */
216 	i2c_read(I2C_RETIMER_ADDR, 9, 1, &reg, 1);
217 	reg |= 0x24;
218 	i2c_write(I2C_RETIMER_ADDR, 9, 1, &reg, 1);
219 
220 	/* Select VCO Divider to full rate (000) */
221 	i2c_read(I2C_RETIMER_ADDR, 0x18, 1, &reg, 1);
222 	reg &= 0x8f;
223 	i2c_write(I2C_RETIMER_ADDR, 0x18, 1, &reg, 1);
224 
225 	/* Select active PFD MUX input as re-timed data (001) */
226 	i2c_read(I2C_RETIMER_ADDR, 0x1e, 1, &reg, 1);
227 	reg &= 0x3f;
228 	reg |= 0x20;
229 	i2c_write(I2C_RETIMER_ADDR, 0x1e, 1, &reg, 1);
230 
231 	/* Set data rate as 10.3125 Gbps */
232 	reg = 0x0;
233 	i2c_write(I2C_RETIMER_ADDR, 0x60, 1, &reg, 1);
234 	reg = 0xb2;
235 	i2c_write(I2C_RETIMER_ADDR, 0x61, 1, &reg, 1);
236 	reg = 0x90;
237 	i2c_write(I2C_RETIMER_ADDR, 0x62, 1, &reg, 1);
238 	reg = 0xb3;
239 	i2c_write(I2C_RETIMER_ADDR, 0x63, 1, &reg, 1);
240 	reg = 0xcd;
241 	i2c_write(I2C_RETIMER_ADDR, 0x64, 1, &reg, 1);
242 }
243 
244 int board_early_init_f(void)
245 {
246 #if defined(CONFIG_DEEP_SLEEP)
247 	if (is_warm_boot())
248 		fsl_dp_disable_console();
249 #endif
250 
251 	return 0;
252 }
253 
254 int board_early_init_r(void)
255 {
256 #ifdef CONFIG_SYS_FLASH_BASE
257 	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
258 	int flash_esel = find_tlb_idx((void *)flashbase, 1);
259 
260 	/*
261 	 * Remap Boot flash + PROMJET region to caching-inhibited
262 	 * so that flash can be erased properly.
263 	 */
264 
265 	/* Flush d-cache and invalidate i-cache of any FLASH data */
266 	flush_dcache();
267 	invalidate_icache();
268 
269 	if (flash_esel == -1) {
270 		/* very unlikely unless something is messed up */
271 		puts("Error: Could not find TLB for FLASH BASE\n");
272 		flash_esel = 2; /* give our best effort to continue */
273 	} else {
274 		/* invalidate existing TLB entry for flash + promjet */
275 		disable_tlb(flash_esel);
276 	}
277 
278 	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
279 		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
280 		0, flash_esel, BOOKE_PAGESZ_256M, 1);
281 #endif
282 	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
283 	board_mux_lane_to_slot();
284 	board_retimer_ds125df111_init();
285 
286 	/* Increase IO drive strength to address FCS error on RGMII */
287 	out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR, 0xbfdb7800);
288 
289 	return 0;
290 }
291 
292 unsigned long get_board_sys_clk(void)
293 {
294 	u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
295 
296 	switch (sysclk_conf & 0x0F) {
297 	case QIXIS_SYSCLK_64:
298 		return 64000000;
299 	case QIXIS_SYSCLK_83:
300 		return 83333333;
301 	case QIXIS_SYSCLK_100:
302 		return 100000000;
303 	case QIXIS_SYSCLK_125:
304 		return 125000000;
305 	case QIXIS_SYSCLK_133:
306 		return 133333333;
307 	case QIXIS_SYSCLK_150:
308 		return 150000000;
309 	case QIXIS_SYSCLK_160:
310 		return 160000000;
311 	case QIXIS_SYSCLK_166:
312 		return 166666666;
313 	}
314 	return 66666666;
315 }
316 
317 unsigned long get_board_ddr_clk(void)
318 {
319 	u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
320 
321 	switch ((ddrclk_conf & 0x30) >> 4) {
322 	case QIXIS_DDRCLK_100:
323 		return 100000000;
324 	case QIXIS_DDRCLK_125:
325 		return 125000000;
326 	case QIXIS_DDRCLK_133:
327 		return 133333333;
328 	}
329 	return 66666666;
330 }
331 
332 #define NUM_SRDS_PLL	2
333 int misc_init_r(void)
334 {
335 #ifdef CONFIG_ARCH_T1024
336 	board_mux_setup();
337 #endif
338 	return 0;
339 }
340 
341 void fdt_fixup_spi_mux(void *blob)
342 {
343 	int nodeoff = 0;
344 
345 	if (hwconfig_arg_cmp("pin_mux", "tdm")) {
346 		while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
347 			"eon,en25s64")) >= 0) {
348 			fdt_del_node(blob, nodeoff);
349 		}
350 	} else {
351 		/* remove tdm node */
352 		while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
353 			"maxim,ds26522")) >= 0) {
354 			fdt_del_node(blob, nodeoff);
355 		}
356 	}
357 }
358 
359 int ft_board_setup(void *blob, bd_t *bd)
360 {
361 	phys_addr_t base;
362 	phys_size_t size;
363 
364 	ft_cpu_setup(blob, bd);
365 
366 	base = env_get_bootm_low();
367 	size = env_get_bootm_size();
368 
369 	fdt_fixup_memory(blob, (u64)base, (u64)size);
370 
371 #ifdef CONFIG_PCI
372 	pci_of_setup(blob, bd);
373 #endif
374 
375 	fdt_fixup_liodn(blob);
376 
377 #ifdef CONFIG_HAS_FSL_DR_USB
378 	fsl_fdt_fixup_dr_usb(blob, bd);
379 #endif
380 
381 #ifdef CONFIG_SYS_DPAA_FMAN
382 	fdt_fixup_fman_ethernet(blob);
383 	fdt_fixup_board_enet(blob);
384 #endif
385 	fdt_fixup_spi_mux(blob);
386 
387 	return 0;
388 }
389 
390 void qixis_dump_switch(void)
391 {
392 	int i, nr_of_cfgsw;
393 
394 	QIXIS_WRITE(cms[0], 0x00);
395 	nr_of_cfgsw = QIXIS_READ(cms[1]);
396 
397 	puts("DIP switch settings dump:\n");
398 	for (i = 1; i <= nr_of_cfgsw; i++) {
399 		QIXIS_WRITE(cms[0], i);
400 		printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
401 	}
402 }
403