1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <command.h> 9 #include <i2c.h> 10 #include <netdev.h> 11 #include <linux/compiler.h> 12 #include <asm/mmu.h> 13 #include <asm/processor.h> 14 #include <asm/cache.h> 15 #include <asm/immap_85xx.h> 16 #include <asm/fsl_law.h> 17 #include <asm/fsl_serdes.h> 18 #include <asm/fsl_liodn.h> 19 #include <fm_eth.h> 20 #include <hwconfig.h> 21 #include "../common/qixis.h" 22 #include "t102xqds.h" 23 #include "t102xqds_qixis.h" 24 #include "../common/sleep.h" 25 26 DECLARE_GLOBAL_DATA_PTR; 27 28 int checkboard(void) 29 { 30 char buf[64]; 31 struct cpu_type *cpu = gd->arch.cpu; 32 static const char *const freq[] = {"100", "125", "156.25", "100.0"}; 33 int clock; 34 u8 sw = QIXIS_READ(arch); 35 36 printf("Board: %sQDS, ", cpu->name); 37 printf("Sys ID: 0x%02x, Board Arch: V%d, ", QIXIS_READ(id), sw >> 4); 38 printf("Board Version: %c, boot from ", (sw & 0xf) + 'A' - 1); 39 40 #ifdef CONFIG_SDCARD 41 puts("SD/MMC\n"); 42 #elif CONFIG_SPIFLASH 43 puts("SPI\n"); 44 #else 45 sw = QIXIS_READ(brdcfg[0]); 46 sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; 47 48 if (sw < 0x8) 49 printf("vBank: %d\n", sw); 50 else if (sw == 0x8) 51 puts("PromJet\n"); 52 else if (sw == 0x9) 53 puts("NAND\n"); 54 else if (sw == 0x15) 55 printf("IFC Card\n"); 56 else 57 printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); 58 #endif 59 60 printf("FPGA: v%d (%s), build %d", 61 (int)QIXIS_READ(scver), qixis_read_tag(buf), 62 (int)qixis_read_minor()); 63 /* the timestamp string contains "\n" at the end */ 64 printf(" on %s", qixis_read_time(buf)); 65 66 puts("SERDES Reference: "); 67 sw = QIXIS_READ(brdcfg[2]); 68 clock = (sw >> 6) & 3; 69 printf("Clock1=%sMHz ", freq[clock]); 70 clock = (sw >> 4) & 3; 71 printf("Clock2=%sMHz\n", freq[clock]); 72 73 return 0; 74 } 75 76 int select_i2c_ch_pca9547(u8 ch) 77 { 78 int ret; 79 80 ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); 81 if (ret) { 82 puts("PCA: failed to select proper channel\n"); 83 return ret; 84 } 85 86 return 0; 87 } 88 89 static int board_mux_lane_to_slot(void) 90 { 91 ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 92 u32 srds_prtcl_s1; 93 u8 brdcfg9; 94 95 srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) & 96 FSL_CORENET2_RCWSR4_SRDS1_PRTCL; 97 srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; 98 99 100 brdcfg9 = QIXIS_READ(brdcfg[9]); 101 QIXIS_WRITE(brdcfg[9], brdcfg9 | BRDCFG9_XFI_TX_DISABLE); 102 103 switch (srds_prtcl_s1) { 104 case 0: 105 /* SerDes1 is not enabled */ 106 break; 107 case 0xd5: 108 case 0x5b: 109 case 0x6b: 110 case 0x77: 111 case 0x6f: 112 case 0x7f: 113 QIXIS_WRITE(brdcfg[12], 0x8c); 114 break; 115 case 0x40: 116 QIXIS_WRITE(brdcfg[12], 0xfc); 117 break; 118 case 0xd6: 119 case 0x5a: 120 case 0x6a: 121 case 0x56: 122 QIXIS_WRITE(brdcfg[12], 0x88); 123 break; 124 case 0x47: 125 QIXIS_WRITE(brdcfg[12], 0xcc); 126 break; 127 case 0x46: 128 QIXIS_WRITE(brdcfg[12], 0xc8); 129 break; 130 case 0x95: 131 case 0x99: 132 brdcfg9 &= ~BRDCFG9_XFI_TX_DISABLE; 133 QIXIS_WRITE(brdcfg[9], brdcfg9); 134 QIXIS_WRITE(brdcfg[12], 0x8c); 135 break; 136 case 0x116: 137 QIXIS_WRITE(brdcfg[12], 0x00); 138 break; 139 case 0x115: 140 case 0x119: 141 case 0x129: 142 case 0x12b: 143 /* Aurora, PCIe, SGMII, SATA */ 144 QIXIS_WRITE(brdcfg[12], 0x04); 145 break; 146 default: 147 printf("WARNING: unsupported for SerDes Protocol %d\n", 148 srds_prtcl_s1); 149 return -1; 150 } 151 152 return 0; 153 } 154 155 #ifdef CONFIG_PPC_T1024 156 static void board_mux_setup(void) 157 { 158 u8 brdcfg15; 159 160 brdcfg15 = QIXIS_READ(brdcfg[15]); 161 brdcfg15 &= ~BRDCFG15_DIUSEL_MASK; 162 163 if (hwconfig_arg_cmp("pin_mux", "tdm")) { 164 /* Route QE_TDM multiplexed signals to TDM Riser slot */ 165 QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_TDM); 166 QIXIS_WRITE(brdcfg[13], BRDCFG13_TDM_INTERFACE << 2); 167 QIXIS_WRITE(brdcfg[5], (QIXIS_READ(brdcfg[5]) & 168 ~BRDCFG5_SPIRTE_MASK) | BRDCFG5_SPIRTE_TDM); 169 } else if (hwconfig_arg_cmp("pin_mux", "ucc")) { 170 /* to UCC (ProfiBus) interface */ 171 QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_UCC); 172 } else if (hwconfig_arg_cmp("pin_mux", "hdmi")) { 173 /* to DVI (HDMI) encoder */ 174 QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_HDMI); 175 } else if (hwconfig_arg_cmp("pin_mux", "lcd")) { 176 /* to DFP (LCD) encoder */ 177 QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_LCDFM | 178 BRDCFG15_LCDPD | BRDCFG15_DIUSEL_LCD); 179 } 180 181 if (hwconfig_arg_cmp("adaptor", "sdxc")) 182 /* Route SPI_CS multiplexed signals to SD slot */ 183 QIXIS_WRITE(brdcfg[5], (QIXIS_READ(brdcfg[5]) & 184 ~BRDCFG5_SPIRTE_MASK) | BRDCFG5_SPIRTE_SDHC); 185 } 186 #endif 187 188 void board_retimer_ds125df111_init(void) 189 { 190 u8 reg; 191 192 /* Retimer DS125DF111 is connected to I2C1_CH7_CH5 */ 193 reg = I2C_MUX_CH7; 194 i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, ®, 1); 195 reg = I2C_MUX_CH5; 196 i2c_write(I2C_MUX_PCA_ADDR_SEC, 0, 1, ®, 1); 197 198 /* Access to Control/Shared register */ 199 reg = 0x0; 200 i2c_write(I2C_RETIMER_ADDR, 0xff, 1, ®, 1); 201 202 /* Read device revision and ID */ 203 i2c_read(I2C_RETIMER_ADDR, 1, 1, ®, 1); 204 debug("Retimer version id = 0x%x\n", reg); 205 206 /* Enable Broadcast */ 207 reg = 0x0c; 208 i2c_write(I2C_RETIMER_ADDR, 0xff, 1, ®, 1); 209 210 /* Reset Channel Registers */ 211 i2c_read(I2C_RETIMER_ADDR, 0, 1, ®, 1); 212 reg |= 0x4; 213 i2c_write(I2C_RETIMER_ADDR, 0, 1, ®, 1); 214 215 /* Enable override divider select and Enable Override Output Mux */ 216 i2c_read(I2C_RETIMER_ADDR, 9, 1, ®, 1); 217 reg |= 0x24; 218 i2c_write(I2C_RETIMER_ADDR, 9, 1, ®, 1); 219 220 /* Select VCO Divider to full rate (000) */ 221 i2c_read(I2C_RETIMER_ADDR, 0x18, 1, ®, 1); 222 reg &= 0x8f; 223 i2c_write(I2C_RETIMER_ADDR, 0x18, 1, ®, 1); 224 225 /* Select active PFD MUX input as re-timed data (001) */ 226 i2c_read(I2C_RETIMER_ADDR, 0x1e, 1, ®, 1); 227 reg &= 0x3f; 228 reg |= 0x20; 229 i2c_write(I2C_RETIMER_ADDR, 0x1e, 1, ®, 1); 230 231 /* Set data rate as 10.3125 Gbps */ 232 reg = 0x0; 233 i2c_write(I2C_RETIMER_ADDR, 0x60, 1, ®, 1); 234 reg = 0xb2; 235 i2c_write(I2C_RETIMER_ADDR, 0x61, 1, ®, 1); 236 reg = 0x90; 237 i2c_write(I2C_RETIMER_ADDR, 0x62, 1, ®, 1); 238 reg = 0xb3; 239 i2c_write(I2C_RETIMER_ADDR, 0x63, 1, ®, 1); 240 reg = 0xcd; 241 i2c_write(I2C_RETIMER_ADDR, 0x64, 1, ®, 1); 242 } 243 244 int board_early_init_f(void) 245 { 246 #if defined(CONFIG_DEEP_SLEEP) 247 if (is_warm_boot()) 248 fsl_dp_disable_console(); 249 #endif 250 251 return 0; 252 } 253 254 int board_early_init_r(void) 255 { 256 #ifdef CONFIG_SYS_FLASH_BASE 257 const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; 258 int flash_esel = find_tlb_idx((void *)flashbase, 1); 259 260 /* 261 * Remap Boot flash + PROMJET region to caching-inhibited 262 * so that flash can be erased properly. 263 */ 264 265 /* Flush d-cache and invalidate i-cache of any FLASH data */ 266 flush_dcache(); 267 invalidate_icache(); 268 269 if (flash_esel == -1) { 270 /* very unlikely unless something is messed up */ 271 puts("Error: Could not find TLB for FLASH BASE\n"); 272 flash_esel = 2; /* give our best effort to continue */ 273 } else { 274 /* invalidate existing TLB entry for flash + promjet */ 275 disable_tlb(flash_esel); 276 } 277 278 set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, 279 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 280 0, flash_esel, BOOKE_PAGESZ_256M, 1); 281 #endif 282 select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); 283 board_mux_lane_to_slot(); 284 board_retimer_ds125df111_init(); 285 286 /* Increase IO drive strength to address FCS error on RGMII */ 287 out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR, 0xbfdb7800); 288 289 return 0; 290 } 291 292 unsigned long get_board_sys_clk(void) 293 { 294 u8 sysclk_conf = QIXIS_READ(brdcfg[1]); 295 296 switch (sysclk_conf & 0x0F) { 297 case QIXIS_SYSCLK_64: 298 return 64000000; 299 case QIXIS_SYSCLK_83: 300 return 83333333; 301 case QIXIS_SYSCLK_100: 302 return 100000000; 303 case QIXIS_SYSCLK_125: 304 return 125000000; 305 case QIXIS_SYSCLK_133: 306 return 133333333; 307 case QIXIS_SYSCLK_150: 308 return 150000000; 309 case QIXIS_SYSCLK_160: 310 return 160000000; 311 case QIXIS_SYSCLK_166: 312 return 166666666; 313 } 314 return 66666666; 315 } 316 317 unsigned long get_board_ddr_clk(void) 318 { 319 u8 ddrclk_conf = QIXIS_READ(brdcfg[1]); 320 321 switch ((ddrclk_conf & 0x30) >> 4) { 322 case QIXIS_DDRCLK_100: 323 return 100000000; 324 case QIXIS_DDRCLK_125: 325 return 125000000; 326 case QIXIS_DDRCLK_133: 327 return 133333333; 328 } 329 return 66666666; 330 } 331 332 #define NUM_SRDS_PLL 2 333 int misc_init_r(void) 334 { 335 #ifdef CONFIG_PPC_T1024 336 board_mux_setup(); 337 #endif 338 return 0; 339 } 340 341 void fdt_fixup_spi_mux(void *blob) 342 { 343 int nodeoff = 0; 344 345 if (hwconfig_arg_cmp("pin_mux", "tdm")) { 346 while ((nodeoff = fdt_node_offset_by_compatible(blob, 0, 347 "eon,en25s64")) >= 0) { 348 fdt_del_node(blob, nodeoff); 349 } 350 } else { 351 /* remove tdm node */ 352 while ((nodeoff = fdt_node_offset_by_compatible(blob, 0, 353 "maxim,ds26522")) >= 0) { 354 fdt_del_node(blob, nodeoff); 355 } 356 } 357 } 358 359 int ft_board_setup(void *blob, bd_t *bd) 360 { 361 phys_addr_t base; 362 phys_size_t size; 363 364 ft_cpu_setup(blob, bd); 365 366 base = getenv_bootm_low(); 367 size = getenv_bootm_size(); 368 369 fdt_fixup_memory(blob, (u64)base, (u64)size); 370 371 #ifdef CONFIG_PCI 372 pci_of_setup(blob, bd); 373 #endif 374 375 fdt_fixup_liodn(blob); 376 377 #ifdef CONFIG_HAS_FSL_DR_USB 378 fsl_fdt_fixup_dr_usb(blob, bd); 379 #endif 380 381 #ifdef CONFIG_SYS_DPAA_FMAN 382 fdt_fixup_fman_ethernet(blob); 383 fdt_fixup_board_enet(blob); 384 #endif 385 fdt_fixup_spi_mux(blob); 386 387 return 0; 388 } 389 390 void qixis_dump_switch(void) 391 { 392 int i, nr_of_cfgsw; 393 394 QIXIS_WRITE(cms[0], 0x00); 395 nr_of_cfgsw = QIXIS_READ(cms[1]); 396 397 puts("DIP switch settings dump:\n"); 398 for (i = 1; i <= nr_of_cfgsw; i++) { 399 QIXIS_WRITE(cms[0], i); 400 printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1])); 401 } 402 } 403