xref: /openbmc/u-boot/board/freescale/t102xqds/README (revision b3820ba9)
1T1024 SoC Overview
2------------------
3The T1024/T1023 dual core and T1014/T1013 single core QorIQ communication processor
4combines two or one 64-bit Power Architecture e5500 core respectively with high
5performance datapath acceleration logic, and network peripheral bus interfaces
6required for networking and telecommunications. This processor can be used in
7applications such as enterprise WLAN access points, routers, switches, firewall
8and other packet processing intensive small enterprise and branch office appliances,
9and general-purpose embedded computing. Its high level of integration offers
10significant performance benefits and greatly helps to simplify board design.
11
12
13The T1024 SoC includes the following function and features:
14- two e5500 cores, each with a private 256 KB L2 cache
15  - Up to 1.4 GHz with 64-bit ISA support (Power Architecture v2.06-compliant)
16  - Three levels of instructions: User, supervisor, and hypervisor
17  - Independent boot and reset
18  - Secure boot capability
19- 256 KB shared L3 CoreNet platform cache (CPC)
20- Interconnect CoreNet platform
21  - CoreNet coherency manager supporting coherent and noncoherent transactions
22    with prioritization and bandwidth allocation amongst CoreNet endpoints
23  - 150 Gbps coherent read bandwidth
24- 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support
25- Data Path Acceleration Architecture (DPAA) incorporating acceleration for the following functions:
26  - Packet parsing, classification, and distribution
27  - Queue management for scheduling, packet sequencing, and congestion management
28  - Cryptography Acceleration (SEC 5.x)
29  - IEEE 1588 support
30  - Hardware buffer management for buffer allocation and deallocation
31  - MACSEC on DPAA-based Ethernet ports
32- Ethernet interfaces
33  - Four 1 Gbps Ethernet controllers
34- Parallel Ethernet interfaces
35  - Two RGMII interfaces
36- High speed peripheral interfaces
37  - Three PCI Express 2.0 controllers/ports running at up to 5 GHz
38  - One SATA controller supporting 1.5 and 3.0 Gb/s operation
39  - One QSGMII interface
40  - Four SGMII interface supporting 1000 Mbps
41  - Three SGMII interfaces supporting up to 2500 Mbps
42  - 10GbE XFI or 10Base-KR interface
43- Additional peripheral interfaces
44  - Two USB 2.0 controllers with integrated PHY
45  - SD/eSDHC/eMMC
46  - eSPI controller
47  - Four I2C controllers
48  - Four UARTs
49  - Four GPIO controllers
50  - Integrated flash controller (IFC)
51  - LCD interface (DIU) with 12 bit dual data rate
52- Multicore programmable interrupt controller (PIC)
53- Two 8-channel DMA engines
54- Single source clocking implementation
55- Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
56- QUICC Engine block
57  - 32-bit RISC controller for flexible support of the communications peripherals
58  - Serial DMA channel for receive and transmit on all serial channels
59  - Two universal communication controllers, supporting TDM, HDLC, and UART
60
61T1023 Personality
62------------------
63T1023 is a reduced personality of T1024 without QUICC Engine, DIU, and
64unavailable deep sleep. Rest of the blocks are almost same as T1024.
65Differences between T1024 and T1023
66Feature		T1024  T1023
67QUICC Engine:	yes    no
68DIU:		yes    no
69Deep Sleep:	yes    no
70I2C controller: 4      3
71DDR:		64-bit 32-bit
72IFC:		32-bit 28-bit
73
74
75T1024QDS board Overview
76-----------------------
77- SERDES Connections
78  4 lanes supporting the following:
79  - PCI Express: supports Gen 1 and Gen 2
80  - SGMII 1G and SGMII 2.5G
81  - QSGMII
82  - XFI
83  - SATA 2.0
84  - High-speed multiplexers route the SerDes traffic to appropriate slots or connectors.
85  - Aurora debug with dedicated connectors.
86- DDR Controller
87  - Supports up to 1600 MTPS data-rate.
88  - Supports one DDR4 or DDR3L module using DDR4 to DDR3L adapter card.
89    - Supports Single-, dual- or quad-rank DIMMs
90  - DDR power supplies 1.35V (DDR3L)/1.20V (DDR4) to all devices with automatic tracking of VTT.
91- IFC/Local Bus
92  - NAND Flash: 8-bit, async, up to 2GB
93  - NOR: 8-bit or 16-bit, non-multiplexed, up to 512MB
94    - NOR devices support 8 virtual banks
95    - Socketed to allow alternate devices
96  - GASIC: Simple (minimal) target within QIXIS FPGA
97  - PromJET rapid memory download support
98  - IFC Debug/Development card
99- Ethernet
100  - Two on-board RGMII 10M/100M/1G ethernet ports.
101  - One QSGMII interface
102  - Four SGMII interface supporting 1Gbps
103  - Three SGMII interfaces supporting 2.5Gbps
104  - one 10Gbps XFI or 10Base-KR interface
105- QIXIS System Logic FPGA
106  - Manages system power and reset sequencing.
107  - Manages the configurations of DUT, board, and clock for dynamic shmoo.
108  - Collects V-I-T data in background for code/power profiling.
109  - Supports legacy TMT test features (POSt, IRS, SYSCLK-synchronous assertion).
110  - General fault monitoring and logging.
111  - Powered from ATX 'standby' power supply that allows continuous operation while rest of the system is off.
112- Clocks
113  - System and DDR clock (SYSCLK, DDRCLK).
114    - Switch selectable to one of 16 common settings in the interval of 64 MHz-166 MHz.
115    - Software programmable in 1 MHz increments from 1-200 MHz.
116  - SERDES clocks
117    - Provides clocks to SerDes blocks and slots.
118    - 100 MHz, 125 MHz and 156.25 MHz options.
119    - Spread-spectrum option for 100 MHz.
120- Power Supplies
121  - Dedicated PMBus regulator for VDD and VDDC.
122  - Adjustable from 0.7V to 1.3V at 35A
123    - VDD can be disabled independanty from VDDC for “deep sleep”.
124    - DDR3L/DDR4 power supply for GVDD: 1.35 or 1.20V at up to 22A.
125    - VTT/MVREF automatically track operating voltage.
126    - Dedicated 2.5V VPP supply.
127  - Dedicated regulators/filters for AVDD supplies.
128  - Dedicated regulators for other supplies, for example OVDD, CVDD, DVDD, LVDD, POVDD, and EVDD.
129- Video
130  - DIU supports video up to 1280x1024x32 bpp.
131    - Chrontel CH7201 for HDMI connection.
132    - TI DS90C387R for direct LCD connection.
133    - Raw (not encoded) video connector for testing or other encoders.
134- USB
135  - Supports two USB 2.0 ports with integrated PHYs.
136    - Two type A ports with 5V@1.5A per port.
137    - Second port can be converted to OTG mini-AB.
138- SDHC
139  For T1024QDS, the SDHC port connects directly to an adapter card slot that has the following features:
140    - upport for optional clock feedback paths.
141    - Support for optional high-speed voltage translation direction controls.
142    - Support for SD slots for: SD, SDHC (1x, 4x, 8x) and MMC.
143    - Support for eMMC memory devices.
144- SPI
145  -On-board support of 3 different devices and sizes.
146- Other IO
147  - Two Serial ports
148  - ProfiBus port
149  - Four I2C ports
150
151
152Memory map on T1024QDS
153----------------------
154Start Address  End Address      Description			Size
1550xF_FFDF_0000  0xF_FFDF_0FFF    IFC - FPGA			4KB
1560xF_FF80_0000  0xF_FF80_FFFF    IFC - NAND Flash		64KB
1570xF_FE00_0000  0xF_FEFF_FFFF    CCSRBAR				16MB
1580xF_F802_0000  0xF_F802_FFFF    PCI Express 3 I/O Space		64KB
1590xF_F801_0000  0xF_F801_FFFF    PCI Express 2 I/O Space		64KB
1600xF_F800_0000  0xF_F800_FFFF    PCI Express 1 I/O Space		64KB
1610xF_F600_0000  0xF_F7FF_FFFF    Queue manager software portal   32MB
1620xF_F400_0000  0xF_F5FF_FFFF    Buffer manager software portal  32MB
1630xF_E800_0000  0xF_EFFF_FFFF    IFC - NOR Flash			128MB
1640xF_E000_0000  0xF_E7FF_FFFF    Promjet				128MB
1650xF_0000_0000  0xF_003F_FFFF    DCSR				4MB
1660xC_2000_0000  0xC_2FFF_FFFF    PCI Express 3 Mem Space		256MB
1670xC_1000_0000  0xC_1FFF_FFFF    PCI Express 2 Mem Space		256MB
1680xC_0000_0000  0xC_0FFF_FFFF    PCI Express 1 Mem Space		256MB
1690x0_0000_0000  0x0_ffff_ffff    DDR				4GB
170
171
172128MB NOR Flash memory Map
173--------------------------
174Start Address   End Address     Definition			Max size
1750xEFF40000      0xEFFFFFFF      U-Boot (current bank)		768KB
1760xEFF20000      0xEFF3FFFF      U-Boot env (current bank)	128KB
1770xEFF00000      0xEFF1FFFF      FMAN Ucode (current bank)	128KB
1780xEFE00000      0xEFE3FFFF      QE firmware (current bank)	256KB
1790xED300000      0xEFEFFFFF      rootfs (alt bank)		44MB
1800xEC800000      0xEC8FFFFF      Hardware device tree (alt bank) 1MB
1810xEC020000      0xEC7FFFFF      Linux.uImage (alt bank)		7MB + 875KB
1820xEC000000      0xEC01FFFF      RCW (alt bank)			128KB
1830xEBF40000      0xEBFFFFFF      U-Boot (alt bank)		768KB
1840xEBF20000      0xEBF3FFFF      U-Boot env (alt bank)		128KB
1850xEBF00000      0xEBF1FFFF      FMAN ucode (alt bank)		128KB
1860xEBE00000      0xEBE3FFFF      QE firmware (alt bank)		256KB
1870xE9300000      0xEBEFFFFF      rootfs (current bank)		44MB
1880xE8800000      0xE88FFFFF      Hardware device tree (cur bank) 1MB
1890xE8020000      0xE86FFFFF      Linux.uImage (current bank)	7MB + 875KB
1900xE8000000      0xE801FFFF      RCW (current bank)		128KB
191
192
193SerDes clock vs DIP-switch settings
194-----------------------------------
195SRDS_PRTCL_S1	SD1_REF_CLK1	SD1_REF_CLK2	SW4[1:4]
1960x6F		100MHz		125MHz		1101
1970xD6		100MHz		100MHz		1111
1980x99		156.25MHz	100MHz		1011
199
200
201T1024 Clock frequency
202----------------------
203BIN   Core     DDR       Platform  FMan
204Bin1: 1400MHz  1600MT/s  400MHz    700MHz
205Bin2: 1200MHz  1600MT/s  400MHz    600MHz
206Bin3: 1000MHz  1600MT/s  400MHz    500MHz
207
208
209
210Software configurations and board settings
211------------------------------------------
2121. NOR boot:
213   a. build NOR boot image
214	$  make T1024QDS_defconfig    (For DDR3L, by default)
215	or make T1024QDS_D4_defconfig (For DDR4)
216	$  make
217   b. program u-boot.bin image to NOR flash
218	=> tftp 1000000 u-boot.bin
219	=> pro off all;era eff40000 efffffff;cp.b 1000000 eff40000 $filesize
220	set SW1[1:8] = '00010011', SW2[1] = '1', SW6[1:4] = '0000' for NOR boot
221
222   Switching between default bank0 and alternate bank4 on NOR flash
223   To change boot source to vbank4:
224	via software:   run command 'qixis_reset altbank' in U-Boot.
225	via DIP-switch: set SW6[1:4] = '0100'
226
227   To change boot source to vbank0:
228	via software:   run command 'qixis_reset' in U-Boot.
229	via DIP-Switch: set SW6[1:4] = '0000'
230
2312. NAND Boot:
232   a. build PBL image for NAND boot
233	$ make T1024QDS_NAND_defconfig
234	$ make
235   b. program u-boot-with-spl-pbl.bin to NAND flash
236	=> tftp 1000000 u-boot-with-spl-pbl.bin
237	=> nand erase 0 $filesize
238	=> nand write 1000000 0 $filesize
239	set SW1[1:8] = '10000010', SW2[1] = '0' and SW6[1:4] = '1001' for NAND boot
240
2413. SPI Boot:
242   a. build PBL image for SPI boot
243	$ make T1024QDS_SPIFLASH_defconfig
244	$ make
245   b. program u-boot-with-spl-pbl.bin to SPI flash
246	=> tftp 1000000 u-boot-with-spl-pbl.bin
247	=> sf probe 0
248	=> sf erase 0 f0000
249	=> sf write 1000000 0 $filesize
250	set SW1[1:8] = '00100010', SW2[1] ='1' for SPI boot
251
2524. SD Boot:
253   a. build PBL image for SD boot
254	$ make T1024QDS_SDCARD_defconfig
255	$ make
256   b. program u-boot-with-spl-pbl.bin to SD/MMC card
257	=> tftp 1000000 u-boot-with-spl-pbl.bin
258	=> mmc write 1000000 8 0x800
259	=> tftp 1000000 fsl_fman_ucode_t1024_xx.bin
260	=> mmc write 1000000 0x820 80
261	set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot
262
263
264DIU/QE-TDM/SDXC settings
265-------------------
266a) For TDM Riser:     set pin_mux=tdm in hwconfig
267b) For UCC(ProfiBus): set pin_mux=ucc in hwconfig
268c) For HDMI(DVI):     set pin_mux=hdmi in hwconfig
269d) For LCD(DFP):      set pin_mux=lcd in hwconfig
270e) For SDXC:	      set adaptor=sdxc in hwconfig
271
2722-stage NAND/SPI/SD boot loader
273-------------------------------
274PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM.
275SPL further initializes DDR using SPD and environment variables
276and copy U-Boot(768 KB) from NAND/SPI/SD device to DDR.
277Finally SPL transers control to U-Boot for futher booting.
278
279SPL has following features:
280 - Executes within 256K
281 - No relocation required
282
283Run time view of SPL framework
284-------------------------------------------------
285|Area		   | Address			|
286-------------------------------------------------
287|SecureBoot header | 0xFFFC0000 (32KB)		|
288-------------------------------------------------
289|GD, BD		   | 0xFFFC8000 (4KB)		|
290-------------------------------------------------
291|ENV		   | 0xFFFC9000 (8KB)		|
292-------------------------------------------------
293|HEAP		   | 0xFFFCB000 (30KB)		|
294-------------------------------------------------
295|STACK		   | 0xFFFD8000 (22KB)		|
296-------------------------------------------------
297|U-Boot SPL	   | 0xFFFD8000 (160KB)		|
298-------------------------------------------------
299
300NAND Flash memory Map on T1024QDS
301-------------------------------------------------------------
302Start		End		Definition	Size
3030x000000	0x0FFFFF	U-Boot		1MB
3040x100000	0x15FFFF	U-Boot env	8KB
3050x160000	0x17FFFF	FMAN Ucode	128KB
3060x180000	0x19FFFF	QE Firmware	128KB
307
308
309SD Card memory Map on T1024QDS
310----------------------------------------------------
311Block		#blocks		Definition	Size
3120x008		2048		U-Boot img	1MB
3130x800		0016		U-Boot env	8KB
3140x820		0256		FMAN Ucode	128KB
3150x920		0256		QE Firmware	128KB
316
317
318SPI Flash memory Map on T1024QDS
319----------------------------------------------------
320Start		End		Definition	Size
3210x000000	0x0FFFFF	U-Boot img	1MB
3220x100000	0x101FFF	U-Boot env	8KB
3230x110000	0x12FFFF	FMAN Ucode	128KB
3240x130000	0x14FFFF	QE Firmware	128KB
325
326
327For more details, please refer to T1024QDS Reference Manual and access
328website www.freescale.com and Freescale QorIQ SDK Infocenter document.
329