1 /* 2 * Copyright 2011,2012 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <command.h> 9 #include <netdev.h> 10 #include <linux/compiler.h> 11 #include <asm/mmu.h> 12 #include <asm/processor.h> 13 #include <asm/cache.h> 14 #include <asm/immap_85xx.h> 15 #include <asm/fsl_law.h> 16 #include <asm/fsl_serdes.h> 17 #include <asm/fsl_liodn.h> 18 #include <fm_eth.h> 19 20 extern void pci_of_setup(void *blob, bd_t *bd); 21 22 #include "cpld.h" 23 24 DECLARE_GLOBAL_DATA_PTR; 25 26 int checkboard(void) 27 { 28 u8 sw; 29 struct cpu_type *cpu = gd->arch.cpu; 30 unsigned int i; 31 32 printf("Board: %sRDB, ", cpu->name); 33 printf("CPLD version: %d.%d ", CPLD_READ(cpld_ver), 34 CPLD_READ(cpld_ver_sub)); 35 36 sw = CPLD_READ(fbank_sel); 37 printf("vBank: %d\n", sw & 0x1); 38 39 /* 40 * Display the actual SERDES reference clocks as configured by the 41 * dip switches on the board. Note that the SWx registers could 42 * technically be set to force the reference clocks to match the 43 * values that the SERDES expects (or vice versa). For now, however, 44 * we just display both values and hope the user notices when they 45 * don't match. 46 */ 47 puts("SERDES Reference Clocks: "); 48 sw = in_8(&CPLD_SW(2)) >> 2; 49 for (i = 0; i < 2; i++) { 50 static const char * const freq[][3] = {{"0", "100", "125"}, 51 {"100", "156.25", "125"} 52 }; 53 unsigned int clock = (sw >> (2 * i)) & 3; 54 55 printf("Bank%u=%sMhz ", i+1, freq[i][clock]); 56 } 57 puts("\n"); 58 59 return 0; 60 } 61 62 int board_early_init_f(void) 63 { 64 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 65 66 /* board only uses the DDR_MCK0/1, so disable the DDR_MCK2/3 */ 67 setbits_be32(&gur->ddrclkdr, 0x000f000f); 68 69 return 0; 70 } 71 72 #define CPLD_LANE_A_SEL 0x1 73 #define CPLD_LANE_G_SEL 0x2 74 #define CPLD_LANE_C_SEL 0x4 75 #define CPLD_LANE_D_SEL 0x8 76 77 void board_config_lanes_mux(void) 78 { 79 ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; 80 int srds_prtcl = (in_be32(&gur->rcwsr[4]) & 81 FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26; 82 83 u8 mux = 0; 84 switch (srds_prtcl) { 85 case 0x2: 86 case 0x5: 87 case 0x9: 88 case 0xa: 89 case 0xf: 90 break; 91 case 0x8: 92 mux |= CPLD_LANE_C_SEL | CPLD_LANE_D_SEL; 93 break; 94 case 0x14: 95 mux |= CPLD_LANE_A_SEL; 96 break; 97 case 0x17: 98 mux |= CPLD_LANE_G_SEL; 99 break; 100 case 0x16: 101 case 0x19: 102 case 0x1a: 103 mux |= CPLD_LANE_G_SEL | CPLD_LANE_C_SEL | CPLD_LANE_D_SEL; 104 break; 105 case 0x1c: 106 mux |= CPLD_LANE_G_SEL | CPLD_LANE_A_SEL; 107 break; 108 default: 109 printf("Fman:Unsupported SerDes Protocol 0x%02x\n", srds_prtcl); 110 break; 111 } 112 CPLD_WRITE(serdes_mux, mux); 113 } 114 115 int board_early_init_r(void) 116 { 117 const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; 118 int flash_esel = find_tlb_idx((void *)flashbase, 1); 119 120 /* 121 * Remap Boot flash + PROMJET region to caching-inhibited 122 * so that flash can be erased properly. 123 */ 124 125 /* Flush d-cache and invalidate i-cache of any FLASH data */ 126 flush_dcache(); 127 invalidate_icache(); 128 129 if (flash_esel == -1) { 130 /* very unlikely unless something is messed up */ 131 puts("Error: Could not find TLB for FLASH BASE\n"); 132 flash_esel = 2; /* give our best effort to continue */ 133 } else { 134 /* invalidate existing TLB entry for flash + promjet */ 135 disable_tlb(flash_esel); 136 } 137 138 set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, 139 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 140 0, flash_esel, BOOKE_PAGESZ_256M, 1); 141 142 board_config_lanes_mux(); 143 144 return 0; 145 } 146 147 unsigned long get_board_sys_clk(unsigned long dummy) 148 { 149 u8 sysclk_conf = CPLD_READ(sysclk_sw1); 150 151 switch (sysclk_conf & 0x7) { 152 case CPLD_SYSCLK_83: 153 return 83333333; 154 case CPLD_SYSCLK_100: 155 return 100000000; 156 default: 157 return 66666666; 158 } 159 } 160 161 #define NUM_SRDS_BANKS 2 162 163 int misc_init_r(void) 164 { 165 serdes_corenet_t *regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; 166 u32 actual[NUM_SRDS_BANKS]; 167 unsigned int i; 168 u8 sw; 169 static const int freq[][3] = { 170 {0, SRDS_PLLCR0_RFCK_SEL_100, SRDS_PLLCR0_RFCK_SEL_125}, 171 {SRDS_PLLCR0_RFCK_SEL_100, SRDS_PLLCR0_RFCK_SEL_156_25, 172 SRDS_PLLCR0_RFCK_SEL_125} 173 }; 174 175 sw = in_8(&CPLD_SW(2)) >> 2; 176 for (i = 0; i < NUM_SRDS_BANKS; i++) { 177 unsigned int clock = (sw >> (2 * i)) & 3; 178 if (clock == 0x3) { 179 printf("Warning: SDREFCLK%u switch setting of '11' is " 180 "unsupported\n", i + 1); 181 break; 182 } 183 if (i == 0 && clock == 0) 184 puts("Warning: SDREFCLK1 switch setting of" 185 "'00' is unsupported\n"); 186 else 187 actual[i] = freq[i][clock]; 188 189 /* 190 * PC board uses a different CPLD with PB board, this CPLD 191 * has cpld_ver_sub = 1, and pcba_ver = 5. But CPLD on PB 192 * board has cpld_ver_sub = 0, and pcba_ver = 4. 193 */ 194 if ((i == 1) && (CPLD_READ(cpld_ver_sub) == 1) && 195 (CPLD_READ(pcba_ver) == 5)) { 196 /* PC board bank2 frequency */ 197 actual[i] = freq[i-1][clock]; 198 } 199 } 200 201 for (i = 0; i < NUM_SRDS_BANKS; i++) { 202 u32 expected = in_be32(®s->bank[i].pllcr0); 203 expected &= SRDS_PLLCR0_RFCK_SEL_MASK; 204 if (expected != actual[i]) { 205 printf("Warning: SERDES bank %u expects reference clock" 206 " %sMHz, but actual is %sMHz\n", i + 1, 207 serdes_clock_to_string(expected), 208 serdes_clock_to_string(actual[i])); 209 } 210 } 211 212 return 0; 213 } 214 215 int ft_board_setup(void *blob, bd_t *bd) 216 { 217 phys_addr_t base; 218 phys_size_t size; 219 220 ft_cpu_setup(blob, bd); 221 222 base = getenv_bootm_low(); 223 size = getenv_bootm_size(); 224 225 fdt_fixup_memory(blob, (u64)base, (u64)size); 226 227 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) 228 fdt_fixup_dr_usb(blob, bd); 229 #endif 230 231 #ifdef CONFIG_PCI 232 pci_of_setup(blob, bd); 233 #endif 234 235 fdt_fixup_liodn(blob); 236 #ifdef CONFIG_SYS_DPAA_FMAN 237 fdt_fixup_fman_ethernet(blob); 238 #endif 239 240 return 0; 241 } 242