1 /* 2 * Copyright 2011,2012 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <command.h> 9 #include <netdev.h> 10 #include <linux/compiler.h> 11 #include <asm/mmu.h> 12 #include <asm/processor.h> 13 #include <asm/cache.h> 14 #include <asm/immap_85xx.h> 15 #include <asm/fsl_law.h> 16 #include <asm/fsl_serdes.h> 17 #include <asm/fsl_portals.h> 18 #include <asm/fsl_liodn.h> 19 #include <fm_eth.h> 20 21 extern void pci_of_setup(void *blob, bd_t *bd); 22 23 #include "cpld.h" 24 25 DECLARE_GLOBAL_DATA_PTR; 26 27 int checkboard(void) 28 { 29 u8 sw; 30 struct cpu_type *cpu = gd->arch.cpu; 31 unsigned int i; 32 33 printf("Board: %sRDB, ", cpu->name); 34 printf("CPLD version: %d.%d ", CPLD_READ(cpld_ver), 35 CPLD_READ(cpld_ver_sub)); 36 37 sw = CPLD_READ(fbank_sel); 38 printf("vBank: %d\n", sw & 0x1); 39 40 /* 41 * Display the actual SERDES reference clocks as configured by the 42 * dip switches on the board. Note that the SWx registers could 43 * technically be set to force the reference clocks to match the 44 * values that the SERDES expects (or vice versa). For now, however, 45 * we just display both values and hope the user notices when they 46 * don't match. 47 */ 48 puts("SERDES Reference Clocks: "); 49 sw = in_8(&CPLD_SW(2)) >> 2; 50 for (i = 0; i < 2; i++) { 51 static const char * const freq[][3] = {{"0", "100", "125"}, 52 {"100", "156.25", "125"} 53 }; 54 unsigned int clock = (sw >> (2 * i)) & 3; 55 56 printf("Bank%u=%sMhz ", i+1, freq[i][clock]); 57 } 58 puts("\n"); 59 60 return 0; 61 } 62 63 int board_early_init_f(void) 64 { 65 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 66 67 /* board only uses the DDR_MCK0/1, so disable the DDR_MCK2/3 */ 68 setbits_be32(&gur->ddrclkdr, 0x000f000f); 69 70 return 0; 71 } 72 73 #define CPLD_LANE_A_SEL 0x1 74 #define CPLD_LANE_G_SEL 0x2 75 #define CPLD_LANE_C_SEL 0x4 76 #define CPLD_LANE_D_SEL 0x8 77 78 void board_config_lanes_mux(void) 79 { 80 ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; 81 int srds_prtcl = (in_be32(&gur->rcwsr[4]) & 82 FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26; 83 84 u8 mux = 0; 85 switch (srds_prtcl) { 86 case 0x2: 87 case 0x5: 88 case 0x9: 89 case 0xa: 90 case 0xf: 91 break; 92 case 0x8: 93 mux |= CPLD_LANE_C_SEL | CPLD_LANE_D_SEL; 94 break; 95 case 0x14: 96 mux |= CPLD_LANE_A_SEL; 97 break; 98 case 0x17: 99 mux |= CPLD_LANE_G_SEL; 100 break; 101 case 0x16: 102 case 0x19: 103 case 0x1a: 104 mux |= CPLD_LANE_G_SEL | CPLD_LANE_C_SEL | CPLD_LANE_D_SEL; 105 break; 106 case 0x1c: 107 mux |= CPLD_LANE_G_SEL | CPLD_LANE_A_SEL; 108 break; 109 default: 110 printf("Fman:Unsupported SerDes Protocol 0x%02x\n", srds_prtcl); 111 break; 112 } 113 CPLD_WRITE(serdes_mux, mux); 114 } 115 116 int board_early_init_r(void) 117 { 118 const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; 119 int flash_esel = find_tlb_idx((void *)flashbase, 1); 120 121 /* 122 * Remap Boot flash + PROMJET region to caching-inhibited 123 * so that flash can be erased properly. 124 */ 125 126 /* Flush d-cache and invalidate i-cache of any FLASH data */ 127 flush_dcache(); 128 invalidate_icache(); 129 130 if (flash_esel == -1) { 131 /* very unlikely unless something is messed up */ 132 puts("Error: Could not find TLB for FLASH BASE\n"); 133 flash_esel = 2; /* give our best effort to continue */ 134 } else { 135 /* invalidate existing TLB entry for flash + promjet */ 136 disable_tlb(flash_esel); 137 } 138 139 set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, 140 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 141 0, flash_esel, BOOKE_PAGESZ_256M, 1); 142 143 set_liodns(); 144 setup_portals(); 145 board_config_lanes_mux(); 146 147 return 0; 148 } 149 150 unsigned long get_board_sys_clk(unsigned long dummy) 151 { 152 u8 sysclk_conf = CPLD_READ(sysclk_sw1); 153 154 switch (sysclk_conf & 0x7) { 155 case CPLD_SYSCLK_83: 156 return 83333333; 157 case CPLD_SYSCLK_100: 158 return 100000000; 159 default: 160 return 66666666; 161 } 162 } 163 164 #define NUM_SRDS_BANKS 2 165 166 int misc_init_r(void) 167 { 168 serdes_corenet_t *regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; 169 u32 actual[NUM_SRDS_BANKS]; 170 unsigned int i; 171 u8 sw; 172 static const int freq[][3] = { 173 {0, SRDS_PLLCR0_RFCK_SEL_100, SRDS_PLLCR0_RFCK_SEL_125}, 174 {SRDS_PLLCR0_RFCK_SEL_100, SRDS_PLLCR0_RFCK_SEL_156_25, 175 SRDS_PLLCR0_RFCK_SEL_125} 176 }; 177 178 sw = in_8(&CPLD_SW(2)) >> 2; 179 for (i = 0; i < NUM_SRDS_BANKS; i++) { 180 unsigned int clock = (sw >> (2 * i)) & 3; 181 if (clock == 0x3) { 182 printf("Warning: SDREFCLK%u switch setting of '11' is " 183 "unsupported\n", i + 1); 184 break; 185 } 186 if (i == 0 && clock == 0) 187 puts("Warning: SDREFCLK1 switch setting of" 188 "'00' is unsupported\n"); 189 else 190 actual[i] = freq[i][clock]; 191 192 /* 193 * PC board uses a different CPLD with PB board, this CPLD 194 * has cpld_ver_sub = 1, and pcba_ver = 5. But CPLD on PB 195 * board has cpld_ver_sub = 0, and pcba_ver = 4. 196 */ 197 if ((i == 1) && (CPLD_READ(cpld_ver_sub) == 1) && 198 (CPLD_READ(pcba_ver) == 5)) { 199 /* PC board bank2 frequency */ 200 actual[i] = freq[i-1][clock]; 201 } 202 } 203 204 for (i = 0; i < NUM_SRDS_BANKS; i++) { 205 u32 expected = in_be32(®s->bank[i].pllcr0); 206 expected &= SRDS_PLLCR0_RFCK_SEL_MASK; 207 if (expected != actual[i]) { 208 printf("Warning: SERDES bank %u expects reference clock" 209 " %sMHz, but actual is %sMHz\n", i + 1, 210 serdes_clock_to_string(expected), 211 serdes_clock_to_string(actual[i])); 212 } 213 } 214 215 return 0; 216 } 217 218 void ft_board_setup(void *blob, bd_t *bd) 219 { 220 phys_addr_t base; 221 phys_size_t size; 222 223 ft_cpu_setup(blob, bd); 224 225 base = getenv_bootm_low(); 226 size = getenv_bootm_size(); 227 228 fdt_fixup_memory(blob, (u64)base, (u64)size); 229 230 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) 231 fdt_fixup_dr_usb(blob, bd); 232 #endif 233 234 #ifdef CONFIG_PCI 235 pci_of_setup(blob, bd); 236 #endif 237 238 fdt_fixup_liodn(blob); 239 #ifdef CONFIG_SYS_DPAA_FMAN 240 fdt_fixup_fman_ethernet(blob); 241 #endif 242 } 243