1 /* 2 * Copyright 2011 Freescale Semiconductor, Inc. 3 * Author: Mingkai Hu <Mingkai.hu@freescale.com> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 /* 9 * The RGMII PHYs are provided by the two on-board PHY. The SGMII PHYs 10 * are provided by the three on-board PHY or by the standard Freescale 11 * four-port SGMII riser card. We need to change the phy-handle in the 12 * kernel dts file to point to the correct PHY according to serdes mux 13 * and serdes protocol selection. 14 */ 15 16 #include <common.h> 17 #include <netdev.h> 18 #include <asm/fsl_serdes.h> 19 #include <fm_eth.h> 20 #include <fsl_mdio.h> 21 #include <malloc.h> 22 #include <asm/fsl_dtsec.h> 23 24 #include "cpld.h" 25 #include "../common/fman.h" 26 27 #ifdef CONFIG_FMAN_ENET 28 /* 29 * Mapping of all 18 SERDES lanes to board slots. A value of '0' here means 30 * that the mapping must be determined dynamically, or that the lane maps to 31 * something other than a board slot 32 */ 33 static u8 lane_to_slot[] = { 34 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 2, 2, 2, 2, 0, 0, 0, 0 35 }; 36 37 static int riser_phy_addr[] = { 38 CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR, 39 CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR, 40 CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR, 41 CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR, 42 }; 43 44 /* 45 * Initialize the lane_to_slot[] array. 46 * 47 * On the P2040RDB board the mapping is controlled by CPLD register. 48 */ 49 static void initialize_lane_to_slot(void) 50 { 51 u8 mux = CPLD_READ(serdes_mux); 52 53 lane_to_slot[6] = (mux & SERDES_MUX_LANE_6_MASK) ? 0 : 1; 54 lane_to_slot[10] = (mux & SERDES_MUX_LANE_A_MASK) ? 0 : 2; 55 lane_to_slot[12] = (mux & SERDES_MUX_LANE_C_MASK) ? 0 : 2; 56 lane_to_slot[13] = (mux & SERDES_MUX_LANE_D_MASK) ? 0 : 2; 57 } 58 59 /* 60 * Given the following ... 61 * 62 * 1) A pointer to an Fman Ethernet node (as identified by the 'compat' 63 * compatible string and 'addr' physical address) 64 * 65 * 2) An Fman port 66 * 67 * ... update the phy-handle property of the Ethernet node to point to the 68 * right PHY. This assumes that we already know the PHY for each port. 69 * 70 * The offset of the Fman Ethernet node is also passed in for convenience, but 71 * it is not used, and we recalculate the offset anyway. 72 * 73 * Note that what we call "Fman ports" (enum fm_port) is really an Fman MAC. 74 * Inside the Fman, "ports" are things that connect to MACs. We only call them 75 * ports in U-Boot because on previous Ethernet devices (e.g. Gianfar), MACs 76 * and ports are the same thing. 77 * 78 */ 79 void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, 80 enum fm_port port, int offset) 81 { 82 phy_interface_t intf = fm_info_get_enet_if(port); 83 char phy[16]; 84 85 /* The RGMII PHY is identified by the MAC connected to it */ 86 if (intf == PHY_INTERFACE_MODE_RGMII) { 87 sprintf(phy, "phy_rgmii_%u", port == FM1_DTSEC5 ? 0 : 1); 88 fdt_set_phy_handle(fdt, compat, addr, phy); 89 } 90 91 /* The SGMII PHY is identified by the MAC connected to it */ 92 if (intf == PHY_INTERFACE_MODE_SGMII) { 93 int lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + port); 94 u8 slot; 95 if (lane < 0) 96 return; 97 slot = lane_to_slot[lane]; 98 if (slot) { 99 sprintf(phy, "phy_sgmii_%x", 100 CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 101 + (port - FM1_DTSEC1)); 102 fdt_set_phy_handle(fdt, compat, addr, phy); 103 } else { 104 sprintf(phy, "phy_sgmii_%x", 105 CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 106 + (port - FM1_DTSEC1)); 107 fdt_set_phy_handle(fdt, compat, addr, phy); 108 } 109 } 110 111 if (intf == PHY_INTERFACE_MODE_XGMII) { 112 /* XAUI */ 113 int lane = serdes_get_first_lane(XAUI_FM1); 114 if (lane >= 0) { 115 /* The XAUI PHY is identified by the slot */ 116 sprintf(phy, "phy_xgmii_%u", lane_to_slot[lane]); 117 fdt_set_phy_handle(fdt, compat, addr, phy); 118 } 119 } 120 } 121 #endif /* #ifdef CONFIG_FMAN_ENET */ 122 123 int board_eth_init(bd_t *bis) 124 { 125 #ifdef CONFIG_FMAN_ENET 126 struct fsl_pq_mdio_info dtsec_mdio_info; 127 struct tgec_mdio_info tgec_mdio_info; 128 unsigned int i, slot; 129 int lane; 130 131 printf("Initializing Fman\n"); 132 133 initialize_lane_to_slot(); 134 135 dtsec_mdio_info.regs = 136 (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR; 137 dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; 138 139 /* Register the real 1G MDIO bus */ 140 fsl_pq_mdio_init(bis, &dtsec_mdio_info); 141 142 tgec_mdio_info.regs = 143 (struct tgec_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR; 144 tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME; 145 146 /* Register the real 10G MDIO bus */ 147 fm_tgec_mdio_init(bis, &tgec_mdio_info); 148 149 /* 150 * Program the three on-board SGMII PHY addresses. If the SGMII Riser 151 * card used, we'll override the PHY address later. For any DTSEC that 152 * is RGMII, we'll also override its PHY address later. We assume that 153 * DTSEC4 and DTSEC5 are used for RGMII. 154 */ 155 fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR); 156 fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR); 157 fm_info_set_phy_address(FM1_DTSEC3, CONFIG_SYS_FM1_DTSEC3_PHY_ADDR); 158 159 for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { 160 int idx = i - FM1_DTSEC1; 161 162 switch (fm_info_get_enet_if(i)) { 163 case PHY_INTERFACE_MODE_SGMII: 164 lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx); 165 if (lane < 0) 166 break; 167 slot = lane_to_slot[lane]; 168 if (slot) 169 fm_info_set_phy_address(i, riser_phy_addr[i]); 170 break; 171 case PHY_INTERFACE_MODE_RGMII: 172 /* Only DTSEC4 and DTSEC5 can be routed to RGMII */ 173 fm_info_set_phy_address(i, i == FM1_DTSEC5 ? 174 CONFIG_SYS_FM1_DTSEC5_PHY_ADDR : 175 CONFIG_SYS_FM1_DTSEC4_PHY_ADDR); 176 break; 177 default: 178 printf("Fman1: DTSEC%u set to unknown interface %i\n", 179 idx + 1, fm_info_get_enet_if(i)); 180 break; 181 } 182 183 fm_info_set_mdio(i, 184 miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME)); 185 } 186 187 lane = serdes_get_first_lane(XAUI_FM1); 188 if (lane >= 0) { 189 slot = lane_to_slot[lane]; 190 if (slot) 191 fm_info_set_phy_address(FM1_10GEC1, 192 CONFIG_SYS_FM1_10GEC1_PHY_ADDR); 193 } 194 195 fm_info_set_mdio(FM1_10GEC1, 196 miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME)); 197 cpu_eth_init(bis); 198 #endif 199 200 return pci_eth_init(bis); 201 } 202