1 /* 2 * Copyright 2013 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <console.h> 9 #include <ns16550.h> 10 #include <malloc.h> 11 #include <mmc.h> 12 #include <nand.h> 13 #include <i2c.h> 14 #include <fsl_esdhc.h> 15 #include <spi_flash.h> 16 #include "../common/spl.h" 17 18 DECLARE_GLOBAL_DATA_PTR; 19 20 static const u32 sysclk_tbl[] = { 21 66666000, 7499900, 83332500, 8999900, 22 99999000, 11111000, 12499800, 13333200 23 }; 24 25 phys_size_t get_effective_memsize(void) 26 { 27 return CONFIG_SYS_L2_SIZE; 28 } 29 30 void board_init_f(ulong bootflag) 31 { 32 u32 plat_ratio, bus_clk; 33 ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; 34 35 console_init_f(); 36 37 /* Set pmuxcr to allow both i2c1 and i2c2 */ 38 setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000); 39 setbits_be32(&gur->pmuxcr, 40 in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA); 41 42 /* Read back the register to synchronize the write. */ 43 in_be32(&gur->pmuxcr); 44 45 #ifdef CONFIG_SPL_SPI_BOOT 46 clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA); 47 #endif 48 49 /* initialize selected port with appropriate baud rate */ 50 plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; 51 plat_ratio >>= 1; 52 bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; 53 gd->bus_clk = bus_clk; 54 55 NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, 56 bus_clk / 16 / CONFIG_BAUDRATE); 57 #ifdef CONFIG_SPL_MMC_BOOT 58 puts("\nSD boot...\n"); 59 #elif defined(CONFIG_SPL_SPI_BOOT) 60 puts("\nSPI Flash boot...\n"); 61 #endif 62 63 /* copy code to RAM and jump to it - this should not return */ 64 /* NOTE - code has to be copied out of NAND buffer before 65 * other blocks can be read. 66 */ 67 relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); 68 } 69 70 void board_init_r(gd_t *gd, ulong dest_addr) 71 { 72 /* Pointer is writable since we allocated a register for it */ 73 gd = (gd_t *)CONFIG_SPL_GD_ADDR; 74 bd_t *bd; 75 76 memset(gd, 0, sizeof(gd_t)); 77 bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t)); 78 memset(bd, 0, sizeof(bd_t)); 79 gd->bd = bd; 80 bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR; 81 bd->bi_memsize = CONFIG_SYS_L2_SIZE; 82 83 arch_cpu_init(); 84 get_clocks(); 85 mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR, 86 CONFIG_SPL_RELOC_MALLOC_SIZE); 87 gd->flags |= GD_FLG_FULL_MALLOC_INIT; 88 89 #ifndef CONFIG_SPL_NAND_BOOT 90 env_init(); 91 #endif 92 #ifdef CONFIG_SPL_MMC_BOOT 93 mmc_initialize(bd); 94 #endif 95 /* relocate environment function pointers etc. */ 96 #ifdef CONFIG_SPL_NAND_BOOT 97 nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, 98 (uchar *)CONFIG_ENV_ADDR); 99 gd->env_addr = (ulong)(CONFIG_ENV_ADDR); 100 gd->env_valid = 1; 101 #else 102 env_relocate(); 103 #endif 104 105 #ifdef CONFIG_SYS_I2C 106 i2c_init_all(); 107 #else 108 i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); 109 #endif 110 111 dram_init(); 112 #ifdef CONFIG_SPL_NAND_BOOT 113 puts("Tertiary program loader running in sram..."); 114 #else 115 puts("Second program loader running in sram...\n"); 116 #endif 117 118 #ifdef CONFIG_SPL_MMC_BOOT 119 mmc_boot(); 120 #elif defined(CONFIG_SPL_SPI_BOOT) 121 fsl_spi_boot(); 122 #elif defined(CONFIG_SPL_NAND_BOOT) 123 nand_boot(); 124 #endif 125 } 126