1 /*
2  * Copyright 2013 Freescale Semiconductor, Inc.
3  *
4  * Authors:  Roy Zang <tie-fei.zang@freescale.com>
5  *           Chunhe Lan <Chunhe.Lan@freescale.com>
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 
10 #include <common.h>
11 #include <command.h>
12 #include <pci.h>
13 #include <asm/io.h>
14 #include <asm/cache.h>
15 #include <asm/processor.h>
16 #include <asm/mmu.h>
17 #include <asm/immap_85xx.h>
18 #include <asm/fsl_pci.h>
19 #include <fsl_ddr_sdram.h>
20 #include <asm/fsl_portals.h>
21 #include <fsl_qbman.h>
22 #include <libfdt.h>
23 #include <fdt_support.h>
24 #include <netdev.h>
25 #include <malloc.h>
26 #include <fm_eth.h>
27 #include <fsl_mdio.h>
28 #include <miiphy.h>
29 #include <phy.h>
30 #include <fsl_dtsec.h>
31 
32 DECLARE_GLOBAL_DATA_PTR;
33 
34 int board_early_init_f(void)
35 {
36 	fsl_lbc_t *lbc = LBC_BASE_ADDR;
37 
38 	/* Set ABSWP to implement conversion of addresses in the LBC */
39 	setbits_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR);
40 
41 	return 0;
42 }
43 
44 int checkboard(void)
45 {
46 	printf("Board: P1023 RDB\n");
47 
48 	return 0;
49 }
50 
51 #ifdef CONFIG_PCI
52 void pci_init_board(void)
53 {
54 	fsl_pcie_init_board(0);
55 }
56 #endif
57 
58 int board_early_init_r(void)
59 {
60 	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
61 	int flash_esel = find_tlb_idx((void *)flashbase, 1);
62 
63 	/*
64 	 * Remap Boot flash + PROMJET region to caching-inhibited
65 	 * so that flash can be erased properly.
66 	 */
67 
68 	/* Flush d-cache and invalidate i-cache of any FLASH data */
69 	flush_dcache();
70 	invalidate_icache();
71 
72 	if (flash_esel == -1) {
73 		/* very unlikely unless something is messed up */
74 		puts("Error: Could not find TLB for FLASH BASE\n");
75 		flash_esel = 2;	/* give our best effort to continue */
76 	} else {
77 		/* invalidate existing TLB entry for flash + promjet */
78 		disable_tlb(flash_esel);
79 	}
80 
81 	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
82 		MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
83 		0, flash_esel, BOOKE_PAGESZ_256M, 1);
84 
85 	setup_qbman_portals();
86 
87 	return 0;
88 }
89 
90 unsigned long get_board_sys_clk(ulong dummy)
91 {
92 	return gd->bus_clk;
93 }
94 
95 unsigned long get_board_ddr_clk(ulong dummy)
96 {
97 	return gd->mem_clk;
98 }
99 
100 int board_eth_init(bd_t *bis)
101 {
102 	ccsr_gur_t *gur = (ccsr_gur_t *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
103 	struct fsl_pq_mdio_info dtsec_mdio_info;
104 
105 	/*
106 	 * Need to set dTSEC 1 pin multiplexing to TSEC. The default setting
107 	 * is not correct.
108 	 */
109 	setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_TSEC1_1);
110 
111 	dtsec_mdio_info.regs =
112 		(struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
113 	dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
114 
115 	/* Register the 1G MDIO bus */
116 	fsl_pq_mdio_init(bis, &dtsec_mdio_info);
117 
118 	fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR);
119 	fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
120 
121 	fm_info_set_mdio(FM1_DTSEC1,
122 			 miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
123 	fm_info_set_mdio(FM1_DTSEC2,
124 			 miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
125 
126 #ifdef CONFIG_FMAN_ENET
127 	cpu_eth_init(bis);
128 #endif
129 
130 	return pci_eth_init(bis);
131 }
132 
133 #if defined(CONFIG_OF_BOARD_SETUP)
134 int ft_board_setup(void *blob, bd_t *bd)
135 {
136 	phys_addr_t base;
137 	phys_size_t size;
138 
139 	ft_cpu_setup(blob, bd);
140 
141 	base = env_get_bootm_low();
142 	size = env_get_bootm_size();
143 
144 	fdt_fixup_memory(blob, (u64)base, (u64)size);
145 
146 #ifdef CONFIG_HAS_FSL_DR_USB
147 	fsl_fdt_fixup_dr_usb(blob, bd);
148 #endif
149 
150 	fdt_fixup_fman_ethernet(blob);
151 
152 	return 0;
153 }
154 #endif
155