1 /* 2 * Copyright 2011 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <ns16550.h> 9 #include <asm/io.h> 10 #include <nand.h> 11 #include <asm/fsl_law.h> 12 #include <fsl_ddr_sdram.h> 13 14 15 const static u32 sysclk_tbl[] = { 16 66666000, 7499900, 83332500, 8999900, 17 99999000, 11111000, 12499800, 13333200 18 }; 19 20 void board_init_f(ulong bootflag) 21 { 22 int px_spd; 23 u32 plat_ratio, sys_clk, bus_clk; 24 ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; 25 26 #if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM) 27 set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM); 28 set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM); 29 #endif 30 /* for FPGA */ 31 set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); 32 set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); 33 34 /* initialize selected port with appropriate baud rate */ 35 px_spd = in_8((unsigned char *)(PIXIS_BASE + PIXIS_SPD)); 36 sys_clk = sysclk_tbl[px_spd & PIXIS_SPD_SYSCLK_MASK]; 37 plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; 38 bus_clk = sys_clk * plat_ratio / 2; 39 40 NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, 41 bus_clk / 16 / CONFIG_BAUDRATE); 42 43 puts("\nNAND boot... "); 44 45 /* copy code to RAM and jump to it - this should not return */ 46 /* NOTE - code has to be copied out of NAND buffer before 47 * other blocks can be read. 48 */ 49 relocate_code(CONFIG_SPL_RELOC_STACK, 0, 50 CONFIG_SPL_RELOC_TEXT_BASE); 51 } 52 53 void board_init_r(gd_t *gd, ulong dest_addr) 54 { 55 puts("\nSecond program loader running in sram..."); 56 nand_boot(); 57 } 58 59 void putc(char c) 60 { 61 if (c == '\n') 62 NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r'); 63 64 NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c); 65 } 66 67 void puts(const char *str) 68 { 69 while (*str) 70 putc(*str++); 71 } 72