1 /* 2 * Copyright 2013 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <ns16550.h> 9 #include <malloc.h> 10 #include <mmc.h> 11 #include <nand.h> 12 #include <i2c.h> 13 #include "../common/ngpixis.h" 14 #include <fsl_esdhc.h> 15 #include <spi_flash.h> 16 17 DECLARE_GLOBAL_DATA_PTR; 18 19 static const u32 sysclk_tbl[] = { 20 66666000, 7499900, 83332500, 8999900, 21 99999000, 11111000, 12499800, 13333200 22 }; 23 24 ulong get_effective_memsize(void) 25 { 26 return CONFIG_SYS_L2_SIZE; 27 } 28 29 void board_init_f(ulong bootflag) 30 { 31 int px_spd; 32 u32 plat_ratio, sys_clk, bus_clk; 33 ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; 34 35 console_init_f(); 36 37 /* Set pmuxcr to allow both i2c1 and i2c2 */ 38 setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000); 39 setbits_be32(&gur->pmuxcr, 40 in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA); 41 42 #ifdef CONFIG_SPL_SPI_BOOT 43 /* Enable the SPI */ 44 clrsetbits_8(&pixis->brdcfg0, PIXIS_ELBC_SPI_MASK, PIXIS_SPI); 45 #endif 46 47 /* Read back the register to synchronize the write. */ 48 in_be32(&gur->pmuxcr); 49 50 /* initialize selected port with appropriate baud rate */ 51 px_spd = in_8((unsigned char *)(PIXIS_BASE + PIXIS_SPD)); 52 sys_clk = sysclk_tbl[px_spd & PIXIS_SPD_SYSCLK_MASK]; 53 plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; 54 bus_clk = sys_clk * plat_ratio / 2; 55 56 NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, 57 bus_clk / 16 / CONFIG_BAUDRATE); 58 #ifdef CONFIG_SPL_MMC_BOOT 59 puts("\nSD boot...\n"); 60 #elif defined(CONFIG_SPL_SPI_BOOT) 61 puts("\nSPI Flash boot...\n"); 62 #endif 63 64 /* copy code to RAM and jump to it - this should not return */ 65 /* NOTE - code has to be copied out of NAND buffer before 66 * other blocks can be read. 67 */ 68 relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); 69 } 70 71 void board_init_r(gd_t *gd, ulong dest_addr) 72 { 73 /* Pointer is writable since we allocated a register for it */ 74 gd = (gd_t *)CONFIG_SPL_GD_ADDR; 75 bd_t *bd; 76 77 memset(gd, 0, sizeof(gd_t)); 78 bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t)); 79 memset(bd, 0, sizeof(bd_t)); 80 gd->bd = bd; 81 bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR; 82 bd->bi_memsize = CONFIG_SYS_L2_SIZE; 83 84 probecpu(); 85 get_clocks(); 86 mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR, 87 CONFIG_SPL_RELOC_MALLOC_SIZE); 88 #ifndef CONFIG_SPL_NAND_BOOT 89 env_init(); 90 #endif 91 #ifdef CONFIG_SPL_MMC_BOOT 92 mmc_initialize(bd); 93 #endif 94 /* relocate environment function pointers etc. */ 95 #ifdef CONFIG_SPL_NAND_BOOT 96 nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, 97 (uchar *)CONFIG_ENV_ADDR); 98 99 gd->env_addr = (ulong)(CONFIG_ENV_ADDR); 100 gd->env_valid = 1; 101 #else 102 env_relocate(); 103 #endif 104 105 i2c_init(CONFIG_SYS_FSL_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); 106 107 gd->ram_size = initdram(0); 108 #ifdef CONFIG_SPL_NAND_BOOT 109 puts("Tertiary program loader running in sram..."); 110 #else 111 puts("Second program loader running in sram...\n"); 112 #endif 113 114 #ifdef CONFIG_SPL_MMC_BOOT 115 mmc_boot(); 116 #elif defined(CONFIG_SPL_SPI_BOOT) 117 spi_boot(); 118 #elif defined(CONFIG_SPL_NAND_BOOT) 119 nand_boot(); 120 #endif 121 } 122