1 /* 2 * Copyright 2013 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <console.h> 9 #include <ns16550.h> 10 #include <malloc.h> 11 #include <mmc.h> 12 #include <nand.h> 13 #include <i2c.h> 14 #include "../common/ngpixis.h" 15 #include <fsl_esdhc.h> 16 #include <spi_flash.h> 17 #include "../common/spl.h" 18 19 DECLARE_GLOBAL_DATA_PTR; 20 21 static const u32 sysclk_tbl[] = { 22 66666000, 7499900, 83332500, 8999900, 23 99999000, 11111000, 12499800, 13333200 24 }; 25 26 phys_size_t get_effective_memsize(void) 27 { 28 return CONFIG_SYS_L2_SIZE; 29 } 30 31 void board_init_f(ulong bootflag) 32 { 33 int px_spd; 34 u32 plat_ratio, sys_clk, bus_clk; 35 ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; 36 37 console_init_f(); 38 39 /* Set pmuxcr to allow both i2c1 and i2c2 */ 40 setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000); 41 setbits_be32(&gur->pmuxcr, 42 in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA); 43 44 #ifdef CONFIG_SPL_SPI_BOOT 45 /* Enable the SPI */ 46 clrsetbits_8(&pixis->brdcfg0, PIXIS_ELBC_SPI_MASK, PIXIS_SPI); 47 #endif 48 49 /* Read back the register to synchronize the write. */ 50 in_be32(&gur->pmuxcr); 51 52 /* initialize selected port with appropriate baud rate */ 53 px_spd = in_8((unsigned char *)(PIXIS_BASE + PIXIS_SPD)); 54 sys_clk = sysclk_tbl[px_spd & PIXIS_SPD_SYSCLK_MASK]; 55 plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; 56 bus_clk = sys_clk * plat_ratio / 2; 57 58 NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, 59 bus_clk / 16 / CONFIG_BAUDRATE); 60 #ifdef CONFIG_SPL_MMC_BOOT 61 puts("\nSD boot...\n"); 62 #elif defined(CONFIG_SPL_SPI_BOOT) 63 puts("\nSPI Flash boot...\n"); 64 #endif 65 66 /* copy code to RAM and jump to it - this should not return */ 67 /* NOTE - code has to be copied out of NAND buffer before 68 * other blocks can be read. 69 */ 70 relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); 71 } 72 73 void board_init_r(gd_t *gd, ulong dest_addr) 74 { 75 /* Pointer is writable since we allocated a register for it */ 76 gd = (gd_t *)CONFIG_SPL_GD_ADDR; 77 bd_t *bd; 78 79 memset(gd, 0, sizeof(gd_t)); 80 bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t)); 81 memset(bd, 0, sizeof(bd_t)); 82 gd->bd = bd; 83 bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR; 84 bd->bi_memsize = CONFIG_SYS_L2_SIZE; 85 86 arch_cpu_init(); 87 get_clocks(); 88 mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR, 89 CONFIG_SPL_RELOC_MALLOC_SIZE); 90 gd->flags |= GD_FLG_FULL_MALLOC_INIT; 91 #ifndef CONFIG_SPL_NAND_BOOT 92 env_init(); 93 #endif 94 #ifdef CONFIG_SPL_MMC_BOOT 95 mmc_initialize(bd); 96 #endif 97 /* relocate environment function pointers etc. */ 98 #ifdef CONFIG_SPL_NAND_BOOT 99 nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, 100 (uchar *)CONFIG_ENV_ADDR); 101 102 gd->env_addr = (ulong)(CONFIG_ENV_ADDR); 103 gd->env_valid = 1; 104 #else 105 env_relocate(); 106 #endif 107 108 #ifdef CONFIG_SYS_I2C 109 i2c_init_all(); 110 #else 111 i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); 112 #endif 113 114 initdram(); 115 #ifdef CONFIG_SPL_NAND_BOOT 116 puts("Tertiary program loader running in sram..."); 117 #else 118 puts("Second program loader running in sram...\n"); 119 #endif 120 121 #ifdef CONFIG_SPL_MMC_BOOT 122 mmc_boot(); 123 #elif defined(CONFIG_SPL_SPI_BOOT) 124 fsl_spi_boot(); 125 #elif defined(CONFIG_SPL_NAND_BOOT) 126 nand_boot(); 127 #endif 128 } 129