1 /* Copyright 2013 Freescale Semiconductor, Inc. 2 * 3 * SPDX-License-Identifier: GPL-2.0+ 4 */ 5 6 #include <common.h> 7 #include <ns16550.h> 8 #include <malloc.h> 9 #include <mmc.h> 10 #include <nand.h> 11 #include <i2c.h> 12 #include <fsl_esdhc.h> 13 #include <spi_flash.h> 14 15 DECLARE_GLOBAL_DATA_PTR; 16 17 phys_size_t get_effective_memsize(void) 18 { 19 return CONFIG_SYS_L2_SIZE; 20 } 21 22 void board_init_f(ulong bootflag) 23 { 24 u32 plat_ratio; 25 ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; 26 struct fsl_ifc ifc = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL}; 27 28 console_init_f(); 29 30 /* Clock configuration to access CPLD using IFC(GPCM) */ 31 setbits_be32(&ifc.gregs->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT); 32 33 #ifdef CONFIG_P1010RDB_PB 34 setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_GPIO01_DRVVBUS); 35 #endif 36 37 /* initialize selected port with appropriate baud rate */ 38 plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; 39 plat_ratio >>= 1; 40 gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; 41 42 NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, 43 gd->bus_clk / 16 / CONFIG_BAUDRATE); 44 45 #ifdef CONFIG_SPL_MMC_BOOT 46 puts("\nSD boot...\n"); 47 #elif defined(CONFIG_SPL_SPI_BOOT) 48 puts("\nSPI Flash boot...\n"); 49 #endif 50 /* copy code to RAM and jump to it - this should not return */ 51 /* NOTE - code has to be copied out of NAND buffer before 52 * other blocks can be read. 53 */ 54 relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); 55 } 56 57 void board_init_r(gd_t *gd, ulong dest_addr) 58 { 59 /* Pointer is writable since we allocated a register for it */ 60 gd = (gd_t *)CONFIG_SPL_GD_ADDR; 61 bd_t *bd; 62 63 memset(gd, 0, sizeof(gd_t)); 64 bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t)); 65 memset(bd, 0, sizeof(bd_t)); 66 gd->bd = bd; 67 bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR; 68 bd->bi_memsize = CONFIG_SYS_L2_SIZE; 69 70 probecpu(); 71 get_clocks(); 72 mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR, 73 CONFIG_SPL_RELOC_MALLOC_SIZE); 74 75 #ifndef CONFIG_SPL_NAND_BOOT 76 env_init(); 77 #endif 78 #ifdef CONFIG_SPL_MMC_BOOT 79 mmc_initialize(bd); 80 #endif 81 82 /* relocate environment function pointers etc. */ 83 #ifdef CONFIG_SPL_NAND_BOOT 84 nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, 85 (uchar *)CONFIG_ENV_ADDR); 86 gd->env_addr = (ulong)(CONFIG_ENV_ADDR); 87 gd->env_valid = 1; 88 #else 89 env_relocate(); 90 #endif 91 92 i2c_init_all(); 93 94 gd->ram_size = initdram(0); 95 #ifdef CONFIG_SPL_NAND_BOOT 96 puts("\nTertiary program loader running in sram..."); 97 #else 98 puts("\nSecond program loader running in sram..."); 99 #endif 100 101 #ifdef CONFIG_SPL_MMC_BOOT 102 mmc_boot(); 103 #elif defined(CONFIG_SPL_SPI_BOOT) 104 spi_boot(); 105 #elif defined(CONFIG_SPL_NAND_BOOT) 106 nand_boot(); 107 #endif 108 } 109