1 /*
2  * Copyright 2010-2011 Freescale Semiconductor, Inc.
3  *
4  * See file CREDITS for list of people who contributed to this
5  * project.
6  *
7  * This program is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU General Public License as
9  * published by the Free Software Foundation; either version 2 of
10  * the License, or (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
20  * MA 02111-1307 USA
21  */
22 
23 #include <common.h>
24 #include <asm/processor.h>
25 #include <asm/mmu.h>
26 #include <asm/cache.h>
27 #include <asm/immap_85xx.h>
28 #include <asm/io.h>
29 #include <miiphy.h>
30 #include <libfdt.h>
31 #include <fdt_support.h>
32 #include <fsl_mdio.h>
33 #include <tsec.h>
34 #include <mmc.h>
35 #include <netdev.h>
36 #include <pci.h>
37 #include <asm/fsl_serdes.h>
38 #include <asm/fsl_ifc.h>
39 #include <asm/fsl_pci.h>
40 
41 #ifndef CONFIG_SDCARD
42 #include <hwconfig.h>
43 #endif
44 
45 DECLARE_GLOBAL_DATA_PTR;
46 
47 #define GPIO4_PCIE_RESET_SET		0x08000000
48 #define MUX_CPLD_CAN_UART		0x00
49 #define MUX_CPLD_TDM			0x01
50 #define MUX_CPLD_SPICS0_FLASH		0x00
51 #define MUX_CPLD_SPICS0_SLIC		0x02
52 
53 #ifndef CONFIG_SDCARD
54 struct cpld_data {
55 	u8 cpld_ver; /* cpld revision */
56 	u8 pcba_ver; /* pcb revision number */
57 	u8 twindie_ddr3;
58 	u8 res1[6];
59 	u8 bank_sel; /* NOR Flash bank */
60 	u8 res2[5];
61 	u8 usb2_sel;
62 	u8 res3[1];
63 	u8 porsw_sel;
64 	u8 tdm_can_sel;
65 	u8 spi_cs0_sel; /* SPI CS0 SLIC/SPI Flash */
66 	u8 por0; /* POR Options */
67 	u8 por1; /* POR Options */
68 	u8 por2; /* POR Options */
69 	u8 por3; /* POR Options */
70 };
71 
72 void cpld_show(void)
73 {
74 	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
75 
76 	printf("CPLD: V%x.%x PCBA: V%x.0\n",
77 		in_8(&cpld_data->cpld_ver) & 0xF0,
78 		in_8(&cpld_data->cpld_ver) & 0x0F,
79 		in_8(&cpld_data->pcba_ver) & 0x0F);
80 
81 #ifdef CONFIG_DEBUG
82 	printf("twindie_ddr =%x\n",
83 		in_8(&cpld_data->twindie_ddr3));
84 	printf("bank_sel =%x\n",
85 		in_8(&cpld_data->bank_sel));
86 	printf("usb2_sel =%x\n",
87 		in_8(&cpld_data->usb2_sel));
88 	printf("porsw_sel =%x\n",
89 		in_8(&cpld_data->porsw_sel));
90 	printf("tdm_can_sel =%x\n",
91 		in_8(&cpld_data->tdm_can_sel));
92 	printf("tdm_can_sel =%x\n",
93 		in_8(&cpld_data->tdm_can_sel));
94 	printf("spi_cs0_sel =%x\n",
95 		in_8(&cpld_data->spi_cs0_sel));
96 	printf("bcsr0 =%x\n",
97 		in_8(&cpld_data->bcsr0));
98 	printf("bcsr1 =%x\n",
99 		in_8(&cpld_data->bcsr1));
100 	printf("bcsr2 =%x\n",
101 		in_8(&cpld_data->bcsr2));
102 	printf("bcsr3 =%x\n",
103 		in_8(&cpld_data->bcsr3));
104 #endif
105 }
106 #endif
107 
108 int board_early_init_f(void)
109 {
110 	ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
111 #ifndef CONFIG_SDCARD
112 	struct fsl_ifc *ifc = (void *)CONFIG_SYS_IFC_ADDR;
113 
114 	/* Clock configuration to access CPLD using IFC(GPCM) */
115 	setbits_be32(&ifc->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
116 #endif
117 	/*
118 	* Reset PCIe slots via GPIO4
119 	*/
120 	setbits_be32(&pgpio->gpdir, GPIO4_PCIE_RESET_SET);
121 	setbits_be32(&pgpio->gpdat, GPIO4_PCIE_RESET_SET);
122 
123 	return 0;
124 }
125 
126 int board_early_init_r(void)
127 {
128 #ifndef CONFIG_SDCARD
129 	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
130 	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
131 
132 	/*
133 	 * Remap Boot flash region to caching-inhibited
134 	 * so that flash can be erased properly.
135 	 */
136 
137 	/* Flush d-cache and invalidate i-cache of any FLASH data */
138 	flush_dcache();
139 	invalidate_icache();
140 
141 	/* invalidate existing TLB entry for flash */
142 	disable_tlb(flash_esel);
143 
144 	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
145 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
146 			0, flash_esel, BOOKE_PAGESZ_16M, 1);
147 
148 	set_tlb(1, flashbase + 0x1000000,
149 			CONFIG_SYS_FLASH_BASE_PHYS + 0x1000000,
150 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
151 			0, flash_esel+1, BOOKE_PAGESZ_16M, 1);
152 #endif
153 	return 0;
154 }
155 
156 #ifdef CONFIG_PCI
157 void pci_init_board(void)
158 {
159 	fsl_pcie_init_board(0);
160 }
161 #endif /* ifdef CONFIG_PCI */
162 
163 int checkboard(void)
164 {
165 	struct cpu_type *cpu;
166 
167 	cpu = gd->arch.cpu;
168 	printf("Board: %sRDB\n", cpu->name);
169 
170 	return 0;
171 }
172 
173 #ifdef CONFIG_TSEC_ENET
174 int board_eth_init(bd_t *bis)
175 {
176 	struct fsl_pq_mdio_info mdio_info;
177 	struct tsec_info_struct tsec_info[4];
178 	struct cpu_type *cpu;
179 	int num = 0;
180 
181 	cpu = gd->arch.cpu;
182 
183 #ifdef CONFIG_TSEC1
184 	SET_STD_TSEC_INFO(tsec_info[num], 1);
185 	num++;
186 #endif
187 #ifdef CONFIG_TSEC2
188 	SET_STD_TSEC_INFO(tsec_info[num], 2);
189 	num++;
190 #endif
191 #ifdef CONFIG_TSEC3
192 	/* P1014 and it's derivatives do not support eTSEC3 */
193 	if (cpu->soc_ver != SVR_P1014) {
194 		SET_STD_TSEC_INFO(tsec_info[num], 3);
195 		num++;
196 	}
197 #endif
198 	if (!num) {
199 		printf("No TSECs initialized\n");
200 		return 0;
201 	}
202 
203 	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
204 	mdio_info.name = DEFAULT_MII_NAME;
205 
206 	fsl_pq_mdio_init(bis, &mdio_info);
207 
208 	tsec_eth_init(bis, tsec_info, num);
209 
210 	return pci_eth_init(bis);
211 }
212 #endif
213 
214 #if defined(CONFIG_OF_BOARD_SETUP)
215 void fdt_del_flexcan(void *blob)
216 {
217 	int nodeoff = 0;
218 
219 	while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
220 				"fsl,p1010-flexcan")) >= 0) {
221 		fdt_del_node(blob, nodeoff);
222 	}
223 }
224 
225 void fdt_del_spi_flash(void *blob)
226 {
227 	int nodeoff = 0;
228 
229 	while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
230 				"spansion,s25sl12801")) >= 0) {
231 		fdt_del_node(blob, nodeoff);
232 	}
233 }
234 
235 void fdt_del_spi_slic(void *blob)
236 {
237 	int nodeoff = 0;
238 
239 	while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
240 				"zarlink,le88266")) >= 0) {
241 		fdt_del_node(blob, nodeoff);
242 	}
243 }
244 
245 void fdt_del_tdm(void *blob)
246 {
247 	int nodeoff = 0;
248 
249 	while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
250 				"fsl,starlite-tdm")) >= 0) {
251 		fdt_del_node(blob, nodeoff);
252 	}
253 }
254 
255 void fdt_del_sdhc(void *blob)
256 {
257 	int nodeoff = 0;
258 
259 	while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
260 			"fsl,esdhc")) >= 0) {
261 		fdt_del_node(blob, nodeoff);
262 	}
263 }
264 
265 void fdt_disable_uart1(void *blob)
266 {
267 	int nodeoff;
268 
269 	nodeoff = fdt_node_offset_by_compat_reg(blob, "fsl,ns16550",
270 					CONFIG_SYS_NS16550_COM2);
271 
272 	if (nodeoff > 0) {
273 		fdt_status_disabled(blob, nodeoff);
274 	} else {
275 		printf("WARNING unable to set status for fsl,ns16550 "
276 			"uart1: %s\n", fdt_strerror(nodeoff));
277 	}
278 }
279 
280 void ft_board_setup(void *blob, bd_t *bd)
281 {
282 	phys_addr_t base;
283 	phys_size_t size;
284 	struct cpu_type *cpu;
285 
286 	cpu = gd->arch.cpu;
287 
288 	ft_cpu_setup(blob, bd);
289 
290 	base = getenv_bootm_low();
291 	size = getenv_bootm_size();
292 
293 #if defined(CONFIG_PCI)
294 	FT_FSL_PCI_SETUP;
295 #endif
296 
297 	fdt_fixup_memory(blob, (u64)base, (u64)size);
298 
299 #if defined(CONFIG_HAS_FSL_DR_USB)
300 	fdt_fixup_dr_usb(blob, bd);
301 #endif
302 
303        /* P1014 and it's derivatives don't support CAN and eTSEC3 */
304 	if (cpu->soc_ver == SVR_P1014) {
305 		fdt_del_flexcan(blob);
306 		fdt_del_node_and_alias(blob, "ethernet2");
307 	}
308 #ifndef CONFIG_SDCARD
309 	/* disable sdhc due to sdhc bug */
310 	fdt_del_sdhc(blob);
311 	if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "can")) {
312 		fdt_del_tdm(blob);
313 		fdt_del_spi_slic(blob);
314 	} else if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "tdm")) {
315 		fdt_del_flexcan(blob);
316 		fdt_del_spi_flash(blob);
317 		fdt_disable_uart1(blob);
318 	} else {
319 		/*
320 		 * If we don't set fsl_p1010mux:tdm_can to "can" or "tdm"
321 		 * explicitly, defaultly spi_cs_sel to spi-flash instead of
322 		 * to tdm/slic.
323 		 */
324 		fdt_del_tdm(blob);
325 		fdt_del_flexcan(blob);
326 		fdt_disable_uart1(blob);
327 	}
328 #endif
329 }
330 #endif
331 
332 #ifndef CONFIG_SDCARD
333 int misc_init_r(void)
334 {
335 	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
336 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
337 
338 	if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "can")) {
339 		clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN1_TDM |
340 				MPC85xx_PMUXCR_CAN1_UART |
341 				MPC85xx_PMUXCR_CAN2_TDM |
342 				MPC85xx_PMUXCR_CAN2_UART);
343 		out_8(&cpld_data->tdm_can_sel, MUX_CPLD_CAN_UART);
344 	} else if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "tdm")) {
345 		clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN2_UART |
346 				MPC85xx_PMUXCR_CAN1_UART);
347 		setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN2_TDM |
348 				MPC85xx_PMUXCR_CAN1_TDM);
349 		clrbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_GPIO);
350 		setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_TDM);
351 		out_8(&cpld_data->tdm_can_sel, MUX_CPLD_TDM);
352 		out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_SLIC);
353 	} else {
354 		/* defaultly spi_cs_sel to flash */
355 		out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_FLASH);
356 	}
357 
358 	return 0;
359 }
360 #endif
361