1 /* 2 * Copyright (C) 2015 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <asm/arch/clock.h> 8 #include <asm/arch/imx-regs.h> 9 #include <asm/arch/mx7-pins.h> 10 #include <asm/arch/sys_proto.h> 11 #include <asm/gpio.h> 12 #include <asm/imx-common/iomux-v3.h> 13 #include <asm/io.h> 14 #include <linux/sizes.h> 15 #include <common.h> 16 #include <fsl_esdhc.h> 17 #include <mmc.h> 18 #include <miiphy.h> 19 #include <netdev.h> 20 #include <power/pmic.h> 21 #include <power/pfuze3000_pmic.h> 22 #include "../common/pfuze.h" 23 #include <i2c.h> 24 #include <asm/imx-common/mxc_i2c.h> 25 #include <asm/arch/crm_regs.h> 26 #include <usb.h> 27 #include <usb/ehci-fsl.h> 28 29 DECLARE_GLOBAL_DATA_PTR; 30 31 #define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | \ 32 PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS) 33 34 #define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ 35 PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM) 36 37 #define ENET_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM) 38 #define ENET_PAD_CTRL_MII (PAD_CTL_DSE_3P3V_32OHM) 39 40 #define ENET_RX_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM) 41 42 #define I2C_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ 43 PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM) 44 45 #define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \ 46 PAD_CTL_DSE_3P3V_49OHM) 47 48 #define QSPI_PAD_CTRL \ 49 (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM) 50 51 #define NAND_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_SRE_SLOW | PAD_CTL_HYS) 52 53 #define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUS_PU5KOHM) 54 #ifdef CONFIG_SYS_I2C_MXC 55 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) 56 /* I2C1 for PMIC */ 57 static struct i2c_pads_info i2c_pad_info1 = { 58 .scl = { 59 .i2c_mode = MX7D_PAD_I2C1_SCL__I2C1_SCL | PC, 60 .gpio_mode = MX7D_PAD_I2C1_SCL__GPIO4_IO8 | PC, 61 .gp = IMX_GPIO_NR(4, 8), 62 }, 63 .sda = { 64 .i2c_mode = MX7D_PAD_I2C1_SDA__I2C1_SDA | PC, 65 .gpio_mode = MX7D_PAD_I2C1_SDA__GPIO4_IO9 | PC, 66 .gp = IMX_GPIO_NR(4, 9), 67 }, 68 }; 69 #endif 70 71 int dram_init(void) 72 { 73 gd->ram_size = PHYS_SDRAM_SIZE; 74 75 return 0; 76 } 77 78 static iomux_v3_cfg_t const wdog_pads[] = { 79 MX7D_PAD_GPIO1_IO00__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL), 80 }; 81 82 static iomux_v3_cfg_t const uart1_pads[] = { 83 MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), 84 MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), 85 }; 86 87 static iomux_v3_cfg_t const usdhc1_pads[] = { 88 MX7D_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), 89 MX7D_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 90 MX7D_PAD_SD1_DATA0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 91 MX7D_PAD_SD1_DATA1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 92 MX7D_PAD_SD1_DATA2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 93 MX7D_PAD_SD1_DATA3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 94 95 MX7D_PAD_SD1_CD_B__GPIO5_IO0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 96 MX7D_PAD_SD1_RESET_B__GPIO5_IO2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 97 }; 98 99 static iomux_v3_cfg_t const usdhc3_emmc_pads[] = { 100 MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), 101 MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 102 MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 103 MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 104 MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 105 MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 106 MX7D_PAD_SD3_DATA4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 107 MX7D_PAD_SD3_DATA5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 108 MX7D_PAD_SD3_DATA6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 109 MX7D_PAD_SD3_DATA7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 110 MX7D_PAD_SD3_STROBE__SD3_STROBE | MUX_PAD_CTRL(USDHC_PAD_CTRL), 111 112 MX7D_PAD_SD3_RESET_B__GPIO6_IO11 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 113 }; 114 115 static iomux_v3_cfg_t const usb_otg1_pads[] = { 116 MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), 117 }; 118 119 static iomux_v3_cfg_t const usb_otg2_pads[] = { 120 MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), 121 }; 122 123 #define IOX_SDI IMX_GPIO_NR(1, 9) 124 #define IOX_STCP IMX_GPIO_NR(1, 12) 125 #define IOX_SHCP IMX_GPIO_NR(1, 13) 126 127 static iomux_v3_cfg_t const iox_pads[] = { 128 /* IOX_SDI */ 129 MX7D_PAD_GPIO1_IO09__GPIO1_IO9 | MUX_PAD_CTRL(NO_PAD_CTRL), 130 /* IOX_STCP */ 131 MX7D_PAD_GPIO1_IO12__GPIO1_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL), 132 /* IOX_SHCP */ 133 MX7D_PAD_GPIO1_IO13__GPIO1_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL), 134 }; 135 136 /* 137 * PCIE_DIS_B --> Q0 138 * PCIE_RST_B --> Q1 139 * HDMI_RST_B --> Q2 140 * PERI_RST_B --> Q3 141 * SENSOR_RST_B --> Q4 142 * ENET_RST_B --> Q5 143 * PERI_3V3_EN --> Q6 144 * LCD_PWR_EN --> Q7 145 */ 146 enum qn { 147 PCIE_DIS_B, 148 PCIE_RST_B, 149 HDMI_RST_B, 150 PERI_RST_B, 151 SENSOR_RST_B, 152 ENET_RST_B, 153 PERI_3V3_EN, 154 LCD_PWR_EN, 155 }; 156 157 enum qn_func { 158 qn_reset, 159 qn_enable, 160 qn_disable, 161 }; 162 163 enum qn_level { 164 qn_low = 0, 165 qn_high = 1, 166 }; 167 168 static enum qn_level seq[3][2] = { 169 {0, 1}, {1, 1}, {0, 0} 170 }; 171 172 static enum qn_func qn_output[8] = { 173 qn_disable, qn_reset, qn_reset, qn_reset, qn_reset, qn_reset, qn_enable, 174 qn_enable 175 }; 176 177 static void iox74lv_init(void) 178 { 179 int i; 180 181 for (i = 7; i >= 0; i--) { 182 gpio_direction_output(IOX_SHCP, 0); 183 gpio_direction_output(IOX_SDI, seq[qn_output[i]][0]); 184 udelay(500); 185 gpio_direction_output(IOX_SHCP, 1); 186 udelay(500); 187 } 188 189 gpio_direction_output(IOX_STCP, 0); 190 udelay(500); 191 /* 192 * shift register will be output to pins 193 */ 194 gpio_direction_output(IOX_STCP, 1); 195 196 for (i = 7; i >= 0; i--) { 197 gpio_direction_output(IOX_SHCP, 0); 198 gpio_direction_output(IOX_SDI, seq[qn_output[i]][1]); 199 udelay(500); 200 gpio_direction_output(IOX_SHCP, 1); 201 udelay(500); 202 } 203 gpio_direction_output(IOX_STCP, 0); 204 udelay(500); 205 /* 206 * shift register will be output to pins 207 */ 208 gpio_direction_output(IOX_STCP, 1); 209 }; 210 211 #ifdef CONFIG_NAND_MXS 212 static iomux_v3_cfg_t const gpmi_pads[] = { 213 MX7D_PAD_SD3_DATA0__NAND_DATA00 | MUX_PAD_CTRL(NAND_PAD_CTRL), 214 MX7D_PAD_SD3_DATA1__NAND_DATA01 | MUX_PAD_CTRL(NAND_PAD_CTRL), 215 MX7D_PAD_SD3_DATA2__NAND_DATA02 | MUX_PAD_CTRL(NAND_PAD_CTRL), 216 MX7D_PAD_SD3_DATA3__NAND_DATA03 | MUX_PAD_CTRL(NAND_PAD_CTRL), 217 MX7D_PAD_SD3_DATA4__NAND_DATA04 | MUX_PAD_CTRL(NAND_PAD_CTRL), 218 MX7D_PAD_SD3_DATA5__NAND_DATA05 | MUX_PAD_CTRL(NAND_PAD_CTRL), 219 MX7D_PAD_SD3_DATA6__NAND_DATA06 | MUX_PAD_CTRL(NAND_PAD_CTRL), 220 MX7D_PAD_SD3_DATA7__NAND_DATA07 | MUX_PAD_CTRL(NAND_PAD_CTRL), 221 MX7D_PAD_SD3_CLK__NAND_CLE | MUX_PAD_CTRL(NAND_PAD_CTRL), 222 MX7D_PAD_SD3_CMD__NAND_ALE | MUX_PAD_CTRL(NAND_PAD_CTRL), 223 MX7D_PAD_SD3_STROBE__NAND_RE_B | MUX_PAD_CTRL(NAND_PAD_CTRL), 224 MX7D_PAD_SD3_RESET_B__NAND_WE_B | MUX_PAD_CTRL(NAND_PAD_CTRL), 225 MX7D_PAD_SAI1_MCLK__NAND_WP_B | MUX_PAD_CTRL(NAND_PAD_CTRL), 226 MX7D_PAD_SAI1_RX_BCLK__NAND_CE3_B | MUX_PAD_CTRL(NAND_PAD_CTRL), 227 MX7D_PAD_SAI1_RX_SYNC__NAND_CE2_B | MUX_PAD_CTRL(NAND_PAD_CTRL), 228 MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B | MUX_PAD_CTRL(NAND_PAD_CTRL), 229 MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B | MUX_PAD_CTRL(NAND_PAD_CTRL), 230 MX7D_PAD_SAI1_TX_SYNC__NAND_DQS | MUX_PAD_CTRL(NAND_PAD_CTRL), 231 MX7D_PAD_SAI1_TX_DATA__NAND_READY_B | MUX_PAD_CTRL(NAND_PAD_READY0_CTRL), 232 }; 233 234 static void setup_gpmi_nand(void) 235 { 236 imx_iomux_v3_setup_multiple_pads(gpmi_pads, ARRAY_SIZE(gpmi_pads)); 237 238 /* NAND_USDHC_BUS_CLK is set in rom */ 239 set_clk_nand(); 240 } 241 #endif 242 243 #ifdef CONFIG_VIDEO_MXS 244 static iomux_v3_cfg_t const lcd_pads[] = { 245 MX7D_PAD_LCD_CLK__LCD_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL), 246 MX7D_PAD_LCD_ENABLE__LCD_ENABLE | MUX_PAD_CTRL(LCD_PAD_CTRL), 247 MX7D_PAD_LCD_HSYNC__LCD_HSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL), 248 MX7D_PAD_LCD_VSYNC__LCD_VSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL), 249 MX7D_PAD_LCD_DATA00__LCD_DATA0 | MUX_PAD_CTRL(LCD_PAD_CTRL), 250 MX7D_PAD_LCD_DATA01__LCD_DATA1 | MUX_PAD_CTRL(LCD_PAD_CTRL), 251 MX7D_PAD_LCD_DATA02__LCD_DATA2 | MUX_PAD_CTRL(LCD_PAD_CTRL), 252 MX7D_PAD_LCD_DATA03__LCD_DATA3 | MUX_PAD_CTRL(LCD_PAD_CTRL), 253 MX7D_PAD_LCD_DATA04__LCD_DATA4 | MUX_PAD_CTRL(LCD_PAD_CTRL), 254 MX7D_PAD_LCD_DATA05__LCD_DATA5 | MUX_PAD_CTRL(LCD_PAD_CTRL), 255 MX7D_PAD_LCD_DATA06__LCD_DATA6 | MUX_PAD_CTRL(LCD_PAD_CTRL), 256 MX7D_PAD_LCD_DATA07__LCD_DATA7 | MUX_PAD_CTRL(LCD_PAD_CTRL), 257 MX7D_PAD_LCD_DATA08__LCD_DATA8 | MUX_PAD_CTRL(LCD_PAD_CTRL), 258 MX7D_PAD_LCD_DATA09__LCD_DATA9 | MUX_PAD_CTRL(LCD_PAD_CTRL), 259 MX7D_PAD_LCD_DATA10__LCD_DATA10 | MUX_PAD_CTRL(LCD_PAD_CTRL), 260 MX7D_PAD_LCD_DATA11__LCD_DATA11 | MUX_PAD_CTRL(LCD_PAD_CTRL), 261 MX7D_PAD_LCD_DATA12__LCD_DATA12 | MUX_PAD_CTRL(LCD_PAD_CTRL), 262 MX7D_PAD_LCD_DATA13__LCD_DATA13 | MUX_PAD_CTRL(LCD_PAD_CTRL), 263 MX7D_PAD_LCD_DATA14__LCD_DATA14 | MUX_PAD_CTRL(LCD_PAD_CTRL), 264 MX7D_PAD_LCD_DATA15__LCD_DATA15 | MUX_PAD_CTRL(LCD_PAD_CTRL), 265 MX7D_PAD_LCD_DATA16__LCD_DATA16 | MUX_PAD_CTRL(LCD_PAD_CTRL), 266 MX7D_PAD_LCD_DATA17__LCD_DATA17 | MUX_PAD_CTRL(LCD_PAD_CTRL), 267 MX7D_PAD_LCD_DATA18__LCD_DATA18 | MUX_PAD_CTRL(LCD_PAD_CTRL), 268 MX7D_PAD_LCD_DATA19__LCD_DATA19 | MUX_PAD_CTRL(LCD_PAD_CTRL), 269 MX7D_PAD_LCD_DATA20__LCD_DATA20 | MUX_PAD_CTRL(LCD_PAD_CTRL), 270 MX7D_PAD_LCD_DATA21__LCD_DATA21 | MUX_PAD_CTRL(LCD_PAD_CTRL), 271 MX7D_PAD_LCD_DATA22__LCD_DATA22 | MUX_PAD_CTRL(LCD_PAD_CTRL), 272 MX7D_PAD_LCD_DATA23__LCD_DATA23 | MUX_PAD_CTRL(LCD_PAD_CTRL), 273 274 MX7D_PAD_LCD_RESET__GPIO3_IO4 | MUX_PAD_CTRL(LCD_PAD_CTRL), 275 }; 276 277 static iomux_v3_cfg_t const pwm_pads[] = { 278 /* Use GPIO for Brightness adjustment, duty cycle = period */ 279 MX7D_PAD_GPIO1_IO01__GPIO1_IO1 | MUX_PAD_CTRL(NO_PAD_CTRL), 280 }; 281 282 static int setup_lcd(void) 283 { 284 imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads)); 285 286 imx_iomux_v3_setup_multiple_pads(pwm_pads, ARRAY_SIZE(pwm_pads)); 287 288 /* Reset LCD */ 289 gpio_direction_output(IMX_GPIO_NR(3, 4) , 0); 290 udelay(500); 291 gpio_direction_output(IMX_GPIO_NR(3, 4) , 1); 292 293 /* Set Brightness to high */ 294 gpio_direction_output(IMX_GPIO_NR(1, 1) , 1); 295 296 return 0; 297 } 298 #endif 299 300 #ifdef CONFIG_FEC_MXC 301 static iomux_v3_cfg_t const fec1_pads[] = { 302 MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 303 MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 304 MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 305 MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 306 MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 307 MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 308 MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), 309 MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), 310 MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), 311 MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), 312 MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), 313 MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), 314 MX7D_PAD_GPIO1_IO10__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), 315 MX7D_PAD_GPIO1_IO11__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), 316 }; 317 318 static void setup_iomux_fec(void) 319 { 320 imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads)); 321 } 322 #endif 323 324 static void setup_iomux_uart(void) 325 { 326 imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); 327 } 328 329 #ifdef CONFIG_FSL_ESDHC 330 331 #define USDHC1_CD_GPIO IMX_GPIO_NR(5, 0) 332 #define USDHC1_PWR_GPIO IMX_GPIO_NR(5, 2) 333 #define USDHC3_PWR_GPIO IMX_GPIO_NR(6, 11) 334 335 static struct fsl_esdhc_cfg usdhc_cfg[3] = { 336 {USDHC1_BASE_ADDR, 0, 4}, 337 {USDHC3_BASE_ADDR}, 338 }; 339 340 int board_mmc_get_env_dev(int devno) 341 { 342 if (devno == 2) 343 devno--; 344 345 return devno; 346 } 347 348 static int mmc_map_to_kernel_blk(int dev_no) 349 { 350 if (dev_no == 1) 351 dev_no++; 352 353 return dev_no; 354 } 355 356 int board_mmc_getcd(struct mmc *mmc) 357 { 358 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 359 int ret = 0; 360 361 switch (cfg->esdhc_base) { 362 case USDHC1_BASE_ADDR: 363 ret = !gpio_get_value(USDHC1_CD_GPIO); 364 break; 365 case USDHC3_BASE_ADDR: 366 ret = 1; /* Assume uSDHC3 emmc is always present */ 367 break; 368 } 369 370 return ret; 371 } 372 373 int board_mmc_init(bd_t *bis) 374 { 375 int i, ret; 376 /* 377 * According to the board_mmc_init() the following map is done: 378 * (U-Boot device node) (Physical Port) 379 * mmc0 USDHC1 380 * mmc2 USDHC3 (eMMC) 381 */ 382 for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { 383 switch (i) { 384 case 0: 385 imx_iomux_v3_setup_multiple_pads( 386 usdhc1_pads, ARRAY_SIZE(usdhc1_pads)); 387 gpio_request(USDHC1_CD_GPIO, "usdhc1_cd"); 388 gpio_direction_input(USDHC1_CD_GPIO); 389 gpio_request(USDHC1_PWR_GPIO, "usdhc1_pwr"); 390 gpio_direction_output(USDHC1_PWR_GPIO, 0); 391 udelay(500); 392 gpio_direction_output(USDHC1_PWR_GPIO, 1); 393 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); 394 break; 395 case 1: 396 imx_iomux_v3_setup_multiple_pads( 397 usdhc3_emmc_pads, ARRAY_SIZE(usdhc3_emmc_pads)); 398 gpio_request(USDHC3_PWR_GPIO, "usdhc3_pwr"); 399 gpio_direction_output(USDHC3_PWR_GPIO, 0); 400 udelay(500); 401 gpio_direction_output(USDHC3_PWR_GPIO, 1); 402 usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); 403 break; 404 default: 405 printf("Warning: you configured more USDHC controllers" 406 "(%d) than supported by the board\n", i + 1); 407 return -EINVAL; 408 } 409 410 ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); 411 if (ret) 412 return ret; 413 } 414 415 return 0; 416 } 417 418 static int check_mmc_autodetect(void) 419 { 420 char *autodetect_str = getenv("mmcautodetect"); 421 422 if ((autodetect_str != NULL) && 423 (strcmp(autodetect_str, "yes") == 0)) { 424 return 1; 425 } 426 427 return 0; 428 } 429 430 static void mmc_late_init(void) 431 { 432 char cmd[32]; 433 char mmcblk[32]; 434 u32 dev_no = mmc_get_env_dev(); 435 436 if (!check_mmc_autodetect()) 437 return; 438 439 setenv_ulong("mmcdev", dev_no); 440 441 /* Set mmcblk env */ 442 sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", 443 mmc_map_to_kernel_blk(dev_no)); 444 setenv("mmcroot", mmcblk); 445 446 sprintf(cmd, "mmc dev %d", dev_no); 447 run_command(cmd, 0); 448 } 449 450 #endif 451 452 #ifdef CONFIG_FEC_MXC 453 int board_eth_init(bd_t *bis) 454 { 455 int ret; 456 457 setup_iomux_fec(); 458 459 ret = fecmxc_initialize_multi(bis, 0, 460 CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE); 461 if (ret) 462 printf("FEC1 MXC: %s:failed\n", __func__); 463 464 return ret; 465 } 466 467 static int setup_fec(void) 468 { 469 struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs 470 = (struct iomuxc_gpr_base_regs *) IOMUXC_GPR_BASE_ADDR; 471 472 /* Use 125M anatop REF_CLK1 for ENET1, clear gpr1[13], gpr1[17]*/ 473 clrsetbits_le32(&iomuxc_gpr_regs->gpr[1], 474 (IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK | 475 IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK), 0); 476 477 return set_clk_enet(ENET_125MHz); 478 } 479 480 481 int board_phy_config(struct phy_device *phydev) 482 { 483 /* enable rgmii rxc skew and phy mode select to RGMII copper */ 484 phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x21); 485 phy_write(phydev, MDIO_DEVAD_NONE, 0x1f, 0x7ea8); 486 phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x2f); 487 phy_write(phydev, MDIO_DEVAD_NONE, 0x1f, 0x71b7); 488 489 if (phydev->drv->config) 490 phydev->drv->config(phydev); 491 return 0; 492 } 493 #endif 494 495 #ifdef CONFIG_FSL_QSPI 496 static iomux_v3_cfg_t const quadspi_pads[] = { 497 MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 | MUX_PAD_CTRL(QSPI_PAD_CTRL), 498 MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 | MUX_PAD_CTRL(QSPI_PAD_CTRL), 499 MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 | MUX_PAD_CTRL(QSPI_PAD_CTRL), 500 MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 | MUX_PAD_CTRL(QSPI_PAD_CTRL), 501 MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK | MUX_PAD_CTRL(QSPI_PAD_CTRL), 502 MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL), 503 }; 504 505 int board_qspi_init(void) 506 { 507 /* Set the iomux */ 508 imx_iomux_v3_setup_multiple_pads(quadspi_pads, 509 ARRAY_SIZE(quadspi_pads)); 510 511 /* Set the clock */ 512 set_clk_qspi(); 513 514 return 0; 515 } 516 #endif 517 518 int board_early_init_f(void) 519 { 520 setup_iomux_uart(); 521 522 setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); 523 imx_iomux_v3_setup_multiple_pads(usb_otg1_pads, 524 ARRAY_SIZE(usb_otg1_pads)); 525 imx_iomux_v3_setup_multiple_pads(usb_otg2_pads, 526 ARRAY_SIZE(usb_otg2_pads)); 527 528 return 0; 529 } 530 531 int board_init(void) 532 { 533 /* address of boot parameters */ 534 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; 535 536 imx_iomux_v3_setup_multiple_pads(iox_pads, ARRAY_SIZE(iox_pads)); 537 538 iox74lv_init(); 539 540 #ifdef CONFIG_FEC_MXC 541 setup_fec(); 542 #endif 543 544 #ifdef CONFIG_NAND_MXS 545 setup_gpmi_nand(); 546 #endif 547 548 #ifdef CONFIG_VIDEO_MXS 549 setup_lcd(); 550 #endif 551 552 #ifdef CONFIG_FSL_QSPI 553 board_qspi_init(); 554 #endif 555 556 return 0; 557 } 558 559 #ifdef CONFIG_POWER 560 #define I2C_PMIC 0 561 int power_init_board(void) 562 { 563 struct pmic *p; 564 int ret; 565 unsigned int reg, rev_id; 566 567 ret = power_pfuze3000_init(I2C_PMIC); 568 if (ret) 569 return ret; 570 571 p = pmic_get("PFUZE3000"); 572 ret = pmic_probe(p); 573 if (ret) 574 return ret; 575 576 pmic_reg_read(p, PFUZE3000_DEVICEID, ®); 577 pmic_reg_read(p, PFUZE3000_REVID, &rev_id); 578 printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id); 579 580 /* disable Low Power Mode during standby mode */ 581 pmic_reg_read(p, PFUZE3000_LDOGCTL, ®); 582 reg |= 0x1; 583 pmic_reg_write(p, PFUZE3000_LDOGCTL, reg); 584 585 return 0; 586 } 587 #endif 588 589 int board_late_init(void) 590 { 591 struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; 592 593 #ifdef CONFIG_ENV_IS_IN_MMC 594 mmc_late_init(); 595 #endif 596 597 imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); 598 599 set_wdog_reset(wdog); 600 601 /* 602 * Do not assert internal WDOG_RESET_B_DEB(controlled by bit 4), 603 * since we use PMIC_PWRON to reset the board. 604 */ 605 clrsetbits_le16(&wdog->wcr, 0, 0x10); 606 607 return 0; 608 } 609 610 int checkboard(void) 611 { 612 puts("Board: i.MX7D SABRESD\n"); 613 614 return 0; 615 } 616 617 #ifdef CONFIG_USB_EHCI_MX7 618 int board_usb_phy_mode(int port) 619 { 620 if (port == 0) 621 return USB_INIT_DEVICE; 622 else 623 return USB_INIT_HOST; 624 } 625 #endif 626