1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright (C) 2014 Freescale Semiconductor, Inc. 4 * 5 * Author: Fabio Estevam <fabio.estevam@freescale.com> 6 */ 7 8 #include <asm/arch/clock.h> 9 #include <asm/arch/crm_regs.h> 10 #include <asm/arch/iomux.h> 11 #include <asm/arch/imx-regs.h> 12 #include <asm/arch/mx6-pins.h> 13 #include <asm/arch/sys_proto.h> 14 #include <asm/gpio.h> 15 #include <asm/mach-imx/iomux-v3.h> 16 #include <asm/io.h> 17 #include <asm/mach-imx/mxc_i2c.h> 18 #include <linux/sizes.h> 19 #include <common.h> 20 #include <fsl_esdhc.h> 21 #include <mmc.h> 22 #include <i2c.h> 23 #include <miiphy.h> 24 #include <netdev.h> 25 #include <power/pmic.h> 26 #include <power/pfuze100_pmic.h> 27 #include "../common/pfuze.h" 28 29 DECLARE_GLOBAL_DATA_PTR; 30 31 #define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ 32 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ 33 PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) 34 35 #define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ 36 PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \ 37 PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) 38 39 #define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \ 40 PAD_CTL_SPEED_HIGH | \ 41 PAD_CTL_DSE_48ohm | PAD_CTL_SRE_FAST) 42 43 #define ENET_CLK_PAD_CTRL (PAD_CTL_SPEED_MED | \ 44 PAD_CTL_DSE_120ohm | PAD_CTL_SRE_FAST) 45 46 #define ENET_RX_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ 47 PAD_CTL_SPEED_HIGH | PAD_CTL_SRE_FAST) 48 49 #define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \ 50 PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm) 51 52 #define WDOG_PAD_CTRL (PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_MED | \ 53 PAD_CTL_DSE_40ohm) 54 55 int dram_init(void) 56 { 57 gd->ram_size = imx_ddr_size(); 58 59 return 0; 60 } 61 62 static iomux_v3_cfg_t const uart1_pads[] = { 63 MX6_PAD_GPIO1_IO04__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL), 64 MX6_PAD_GPIO1_IO05__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL), 65 }; 66 67 static iomux_v3_cfg_t const wdog_b_pad = { 68 MX6_PAD_GPIO1_IO13__GPIO1_IO_13 | MUX_PAD_CTRL(WDOG_PAD_CTRL), 69 }; 70 static iomux_v3_cfg_t const fec1_pads[] = { 71 MX6_PAD_ENET1_MDC__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), 72 MX6_PAD_ENET1_MDIO__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), 73 MX6_PAD_RGMII1_RX_CTL__ENET1_RX_EN | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 74 MX6_PAD_RGMII1_RD0__ENET1_RX_DATA_0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 75 MX6_PAD_RGMII1_RD1__ENET1_RX_DATA_1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 76 MX6_PAD_RGMII1_RD2__ENET1_RX_DATA_2 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 77 MX6_PAD_RGMII1_RD3__ENET1_RX_DATA_3 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 78 MX6_PAD_RGMII1_RXC__ENET1_RX_CLK | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 79 MX6_PAD_RGMII1_TX_CTL__ENET1_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), 80 MX6_PAD_RGMII1_TD0__ENET1_TX_DATA_0 | MUX_PAD_CTRL(ENET_PAD_CTRL), 81 MX6_PAD_RGMII1_TD1__ENET1_TX_DATA_1 | MUX_PAD_CTRL(ENET_PAD_CTRL), 82 MX6_PAD_RGMII1_TD2__ENET1_TX_DATA_2 | MUX_PAD_CTRL(ENET_PAD_CTRL), 83 MX6_PAD_RGMII1_TD3__ENET1_TX_DATA_3 | MUX_PAD_CTRL(ENET_PAD_CTRL), 84 MX6_PAD_RGMII1_TXC__ENET1_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), 85 }; 86 87 static iomux_v3_cfg_t const peri_3v3_pads[] = { 88 MX6_PAD_QSPI1A_DATA0__GPIO4_IO_16 | MUX_PAD_CTRL(NO_PAD_CTRL), 89 }; 90 91 static iomux_v3_cfg_t const phy_control_pads[] = { 92 /* 25MHz Ethernet PHY Clock */ 93 MX6_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL), 94 95 /* ENET PHY Power */ 96 MX6_PAD_ENET2_COL__GPIO2_IO_6 | MUX_PAD_CTRL(NO_PAD_CTRL), 97 98 /* AR8031 PHY Reset */ 99 MX6_PAD_ENET2_CRS__GPIO2_IO_7 | MUX_PAD_CTRL(NO_PAD_CTRL), 100 }; 101 102 static void setup_iomux_uart(void) 103 { 104 imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); 105 } 106 107 static int setup_fec(void) 108 { 109 struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; 110 struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; 111 int reg, ret; 112 113 /* Use 125MHz anatop loopback REF_CLK1 for ENET1 */ 114 clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC1_MASK, 0); 115 116 ret = enable_fec_anatop_clock(0, ENET_125MHZ); 117 if (ret) 118 return ret; 119 120 imx_iomux_v3_setup_multiple_pads(phy_control_pads, 121 ARRAY_SIZE(phy_control_pads)); 122 123 /* Enable the ENET power, active low */ 124 gpio_request(IMX_GPIO_NR(2, 6), "enet_rst"); 125 gpio_direction_output(IMX_GPIO_NR(2, 6) , 0); 126 127 /* Reset AR8031 PHY */ 128 gpio_request(IMX_GPIO_NR(2, 7), "phy_rst"); 129 gpio_direction_output(IMX_GPIO_NR(2, 7) , 0); 130 mdelay(10); 131 gpio_set_value(IMX_GPIO_NR(2, 7), 1); 132 133 reg = readl(&anatop->pll_enet); 134 reg |= BM_ANADIG_PLL_ENET_REF_25M_ENABLE; 135 writel(reg, &anatop->pll_enet); 136 137 return 0; 138 } 139 140 int board_eth_init(bd_t *bis) 141 { 142 imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads)); 143 setup_fec(); 144 145 return cpu_eth_init(bis); 146 } 147 148 int power_init_board(void) 149 { 150 struct udevice *dev; 151 unsigned int reg; 152 int ret; 153 154 dev = pfuze_common_init(); 155 if (!dev) 156 return -ENODEV; 157 158 ret = pfuze_mode_init(dev, APS_PFM); 159 if (ret < 0) 160 return ret; 161 162 /* Enable power of VGEN5 3V3, needed for SD3 */ 163 reg = pmic_reg_read(dev, PFUZE100_VGEN5VOL); 164 reg &= ~LDO_VOL_MASK; 165 reg |= (LDOB_3_30V | (1 << LDO_EN)); 166 pmic_reg_write(dev, PFUZE100_VGEN5VOL, reg); 167 168 return 0; 169 } 170 171 int board_phy_config(struct phy_device *phydev) 172 { 173 /* 174 * Enable 1.8V(SEL_1P5_1P8_POS_REG) on 175 * Phy control debug reg 0 176 */ 177 phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f); 178 phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8); 179 180 /* rgmii tx clock delay enable */ 181 phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05); 182 phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); 183 184 if (phydev->drv->config) 185 phydev->drv->config(phydev); 186 187 return 0; 188 } 189 190 int board_early_init_f(void) 191 { 192 setup_iomux_uart(); 193 194 /* Enable PERI_3V3, which is used by SD2, ENET, LVDS, BT */ 195 imx_iomux_v3_setup_multiple_pads(peri_3v3_pads, 196 ARRAY_SIZE(peri_3v3_pads)); 197 198 return 0; 199 } 200 201 int board_mmc_get_env_dev(int devno) 202 { 203 return devno; 204 } 205 206 #ifdef CONFIG_FSL_QSPI 207 208 #define QSPI_PAD_CTRL1 \ 209 (PAD_CTL_SRE_FAST | PAD_CTL_SPEED_HIGH | \ 210 PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_40ohm) 211 212 static iomux_v3_cfg_t const quadspi_pads[] = { 213 MX6_PAD_NAND_WP_B__QSPI2_A_DATA_0 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 214 MX6_PAD_NAND_READY_B__QSPI2_A_DATA_1 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 215 MX6_PAD_NAND_CE0_B__QSPI2_A_DATA_2 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 216 MX6_PAD_NAND_CE1_B__QSPI2_A_DATA_3 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 217 MX6_PAD_NAND_ALE__QSPI2_A_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 218 MX6_PAD_NAND_CLE__QSPI2_A_SCLK | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 219 MX6_PAD_NAND_DATA07__QSPI2_A_DQS | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 220 MX6_PAD_NAND_DATA01__QSPI2_B_DATA_0 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 221 MX6_PAD_NAND_DATA00__QSPI2_B_DATA_1 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 222 MX6_PAD_NAND_WE_B__QSPI2_B_DATA_2 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 223 MX6_PAD_NAND_RE_B__QSPI2_B_DATA_3 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 224 MX6_PAD_NAND_DATA03__QSPI2_B_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 225 MX6_PAD_NAND_DATA02__QSPI2_B_SCLK | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 226 MX6_PAD_NAND_DATA05__QSPI2_B_DQS | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 227 }; 228 229 int board_qspi_init(void) 230 { 231 /* Set the iomux */ 232 imx_iomux_v3_setup_multiple_pads(quadspi_pads, 233 ARRAY_SIZE(quadspi_pads)); 234 235 /* Set the clock */ 236 enable_qspi_clk(1); 237 238 return 0; 239 } 240 #endif 241 242 #ifdef CONFIG_VIDEO_MXS 243 static iomux_v3_cfg_t const lcd_pads[] = { 244 MX6_PAD_LCD1_CLK__LCDIF1_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL), 245 MX6_PAD_LCD1_ENABLE__LCDIF1_ENABLE | MUX_PAD_CTRL(LCD_PAD_CTRL), 246 MX6_PAD_LCD1_HSYNC__LCDIF1_HSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL), 247 MX6_PAD_LCD1_VSYNC__LCDIF1_VSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL), 248 MX6_PAD_LCD1_DATA00__LCDIF1_DATA_0 | MUX_PAD_CTRL(LCD_PAD_CTRL), 249 MX6_PAD_LCD1_DATA01__LCDIF1_DATA_1 | MUX_PAD_CTRL(LCD_PAD_CTRL), 250 MX6_PAD_LCD1_DATA02__LCDIF1_DATA_2 | MUX_PAD_CTRL(LCD_PAD_CTRL), 251 MX6_PAD_LCD1_DATA03__LCDIF1_DATA_3 | MUX_PAD_CTRL(LCD_PAD_CTRL), 252 MX6_PAD_LCD1_DATA04__LCDIF1_DATA_4 | MUX_PAD_CTRL(LCD_PAD_CTRL), 253 MX6_PAD_LCD1_DATA05__LCDIF1_DATA_5 | MUX_PAD_CTRL(LCD_PAD_CTRL), 254 MX6_PAD_LCD1_DATA06__LCDIF1_DATA_6 | MUX_PAD_CTRL(LCD_PAD_CTRL), 255 MX6_PAD_LCD1_DATA07__LCDIF1_DATA_7 | MUX_PAD_CTRL(LCD_PAD_CTRL), 256 MX6_PAD_LCD1_DATA08__LCDIF1_DATA_8 | MUX_PAD_CTRL(LCD_PAD_CTRL), 257 MX6_PAD_LCD1_DATA09__LCDIF1_DATA_9 | MUX_PAD_CTRL(LCD_PAD_CTRL), 258 MX6_PAD_LCD1_DATA10__LCDIF1_DATA_10 | MUX_PAD_CTRL(LCD_PAD_CTRL), 259 MX6_PAD_LCD1_DATA11__LCDIF1_DATA_11 | MUX_PAD_CTRL(LCD_PAD_CTRL), 260 MX6_PAD_LCD1_DATA12__LCDIF1_DATA_12 | MUX_PAD_CTRL(LCD_PAD_CTRL), 261 MX6_PAD_LCD1_DATA13__LCDIF1_DATA_13 | MUX_PAD_CTRL(LCD_PAD_CTRL), 262 MX6_PAD_LCD1_DATA14__LCDIF1_DATA_14 | MUX_PAD_CTRL(LCD_PAD_CTRL), 263 MX6_PAD_LCD1_DATA15__LCDIF1_DATA_15 | MUX_PAD_CTRL(LCD_PAD_CTRL), 264 MX6_PAD_LCD1_DATA16__LCDIF1_DATA_16 | MUX_PAD_CTRL(LCD_PAD_CTRL), 265 MX6_PAD_LCD1_DATA17__LCDIF1_DATA_17 | MUX_PAD_CTRL(LCD_PAD_CTRL), 266 MX6_PAD_LCD1_DATA18__LCDIF1_DATA_18 | MUX_PAD_CTRL(LCD_PAD_CTRL), 267 MX6_PAD_LCD1_DATA19__LCDIF1_DATA_19 | MUX_PAD_CTRL(LCD_PAD_CTRL), 268 MX6_PAD_LCD1_DATA20__LCDIF1_DATA_20 | MUX_PAD_CTRL(LCD_PAD_CTRL), 269 MX6_PAD_LCD1_DATA21__LCDIF1_DATA_21 | MUX_PAD_CTRL(LCD_PAD_CTRL), 270 MX6_PAD_LCD1_DATA22__LCDIF1_DATA_22 | MUX_PAD_CTRL(LCD_PAD_CTRL), 271 MX6_PAD_LCD1_DATA23__LCDIF1_DATA_23 | MUX_PAD_CTRL(LCD_PAD_CTRL), 272 MX6_PAD_LCD1_RESET__GPIO3_IO_27 | MUX_PAD_CTRL(NO_PAD_CTRL), 273 274 /* Use GPIO for Brightness adjustment, duty cycle = period */ 275 MX6_PAD_SD1_DATA2__GPIO6_IO_4 | MUX_PAD_CTRL(NO_PAD_CTRL), 276 }; 277 278 static int setup_lcd(void) 279 { 280 enable_lcdif_clock(LCDIF1_BASE_ADDR, 1); 281 282 imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads)); 283 284 /* Reset the LCD */ 285 gpio_request(IMX_GPIO_NR(3, 27), "lcd_rst"); 286 gpio_direction_output(IMX_GPIO_NR(3, 27) , 0); 287 udelay(500); 288 gpio_direction_output(IMX_GPIO_NR(3, 27) , 1); 289 290 /* Set Brightness to high */ 291 gpio_request(IMX_GPIO_NR(6, 4), "lcd_bright"); 292 gpio_direction_output(IMX_GPIO_NR(6, 4) , 1); 293 294 return 0; 295 } 296 #endif 297 298 int board_init(void) 299 { 300 /* Address of boot parameters */ 301 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; 302 303 /* 304 * Because kernel set WDOG_B mux before pad with the common pinctrl 305 * framwork now and wdog reset will be triggered once set WDOG_B mux 306 * with default pad setting, we set pad setting here to workaround this. 307 * Since imx_iomux_v3_setup_pad also set mux before pad setting, we set 308 * as GPIO mux firstly here to workaround it. 309 */ 310 imx_iomux_v3_setup_pad(wdog_b_pad); 311 312 /* Active high for ncp692 */ 313 gpio_request(IMX_GPIO_NR(4, 16), "ncp692_en"); 314 gpio_direction_output(IMX_GPIO_NR(4, 16), 1); 315 316 #ifdef CONFIG_FSL_QSPI 317 board_qspi_init(); 318 #endif 319 320 #ifdef CONFIG_VIDEO_MXS 321 setup_lcd(); 322 #endif 323 324 return 0; 325 } 326 327 static bool is_reva(void) 328 { 329 return (nxp_board_rev() == 1); 330 } 331 332 int board_late_init(void) 333 { 334 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 335 if (is_reva()) 336 env_set("board_rev", "REVA"); 337 #endif 338 return 0; 339 } 340 341 int checkboard(void) 342 { 343 printf("Board: MX6SX SABRE SDB rev%c\n", nxp_board_rev_string()); 344 345 return 0; 346 } 347 348 #ifdef CONFIG_SPL_BUILD 349 #include <linux/libfdt.h> 350 #include <spl.h> 351 #include <asm/arch/mx6-ddr.h> 352 353 static struct fsl_esdhc_cfg usdhc_cfg[3] = { 354 {USDHC2_BASE_ADDR, 0, 4}, 355 {USDHC3_BASE_ADDR}, 356 {USDHC4_BASE_ADDR}, 357 }; 358 359 #define USDHC3_CD_GPIO IMX_GPIO_NR(2, 10) 360 #define USDHC3_PWR_GPIO IMX_GPIO_NR(2, 11) 361 #define USDHC4_CD_GPIO IMX_GPIO_NR(6, 21) 362 363 static iomux_v3_cfg_t const usdhc2_pads[] = { 364 MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), 365 MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 366 MX6_PAD_SD2_DATA0__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 367 MX6_PAD_SD2_DATA1__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 368 MX6_PAD_SD2_DATA2__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 369 MX6_PAD_SD2_DATA3__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 370 }; 371 372 static iomux_v3_cfg_t const usdhc3_pads[] = { 373 MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), 374 MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 375 MX6_PAD_SD3_DATA0__USDHC3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 376 MX6_PAD_SD3_DATA1__USDHC3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 377 MX6_PAD_SD3_DATA2__USDHC3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 378 MX6_PAD_SD3_DATA3__USDHC3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 379 MX6_PAD_SD3_DATA4__USDHC3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 380 MX6_PAD_SD3_DATA5__USDHC3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 381 MX6_PAD_SD3_DATA6__USDHC3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 382 MX6_PAD_SD3_DATA7__USDHC3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 383 384 /* CD pin */ 385 MX6_PAD_KEY_COL0__GPIO2_IO_10 | MUX_PAD_CTRL(NO_PAD_CTRL), 386 387 /* RST_B, used for power reset cycle */ 388 MX6_PAD_KEY_COL1__GPIO2_IO_11 | MUX_PAD_CTRL(NO_PAD_CTRL), 389 }; 390 391 static iomux_v3_cfg_t const usdhc4_pads[] = { 392 MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), 393 MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 394 MX6_PAD_SD4_DATA0__USDHC4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 395 MX6_PAD_SD4_DATA1__USDHC4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 396 MX6_PAD_SD4_DATA2__USDHC4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 397 MX6_PAD_SD4_DATA3__USDHC4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 398 MX6_PAD_SD4_DATA7__GPIO6_IO_21 | MUX_PAD_CTRL(NO_PAD_CTRL), 399 }; 400 401 int board_mmc_init(bd_t *bis) 402 { 403 struct src *src_regs = (struct src *)SRC_BASE_ADDR; 404 u32 val; 405 u32 port; 406 407 val = readl(&src_regs->sbmr1); 408 409 if ((val & 0xc0) != 0x40) { 410 printf("Not boot from USDHC!\n"); 411 return -EINVAL; 412 } 413 414 port = (val >> 11) & 0x3; 415 printf("port %d\n", port); 416 switch (port) { 417 case 1: 418 imx_iomux_v3_setup_multiple_pads( 419 usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); 420 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); 421 usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR; 422 break; 423 case 2: 424 imx_iomux_v3_setup_multiple_pads( 425 usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); 426 gpio_direction_input(USDHC3_CD_GPIO); 427 gpio_direction_output(USDHC3_PWR_GPIO, 1); 428 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); 429 usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR; 430 break; 431 case 3: 432 imx_iomux_v3_setup_multiple_pads( 433 usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); 434 gpio_direction_input(USDHC4_CD_GPIO); 435 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); 436 usdhc_cfg[0].esdhc_base = USDHC4_BASE_ADDR; 437 break; 438 } 439 440 gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk; 441 return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); 442 } 443 444 int board_mmc_getcd(struct mmc *mmc) 445 { 446 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 447 int ret = 0; 448 449 switch (cfg->esdhc_base) { 450 case USDHC2_BASE_ADDR: 451 ret = 1; /* Assume uSDHC2 is always present */ 452 break; 453 case USDHC3_BASE_ADDR: 454 ret = !gpio_get_value(USDHC3_CD_GPIO); 455 break; 456 case USDHC4_BASE_ADDR: 457 ret = !gpio_get_value(USDHC4_CD_GPIO); 458 break; 459 } 460 461 return ret; 462 } 463 464 const struct mx6sx_iomux_ddr_regs mx6_ddr_ioregs = { 465 .dram_dqm0 = 0x00000028, 466 .dram_dqm1 = 0x00000028, 467 .dram_dqm2 = 0x00000028, 468 .dram_dqm3 = 0x00000028, 469 .dram_ras = 0x00000020, 470 .dram_cas = 0x00000020, 471 .dram_odt0 = 0x00000020, 472 .dram_odt1 = 0x00000020, 473 .dram_sdba2 = 0x00000000, 474 .dram_sdcke0 = 0x00003000, 475 .dram_sdcke1 = 0x00003000, 476 .dram_sdclk_0 = 0x00000030, 477 .dram_sdqs0 = 0x00000028, 478 .dram_sdqs1 = 0x00000028, 479 .dram_sdqs2 = 0x00000028, 480 .dram_sdqs3 = 0x00000028, 481 .dram_reset = 0x00000020, 482 }; 483 484 const struct mx6sx_iomux_grp_regs mx6_grp_ioregs = { 485 .grp_addds = 0x00000020, 486 .grp_ddrmode_ctl = 0x00020000, 487 .grp_ddrpke = 0x00000000, 488 .grp_ddrmode = 0x00020000, 489 .grp_b0ds = 0x00000028, 490 .grp_b1ds = 0x00000028, 491 .grp_ctlds = 0x00000020, 492 .grp_ddr_type = 0x000c0000, 493 .grp_b2ds = 0x00000028, 494 .grp_b3ds = 0x00000028, 495 }; 496 497 const struct mx6_mmdc_calibration mx6_mmcd_calib = { 498 .p0_mpwldectrl0 = 0x00290025, 499 .p0_mpwldectrl1 = 0x00220022, 500 .p0_mpdgctrl0 = 0x41480144, 501 .p0_mpdgctrl1 = 0x01340130, 502 .p0_mprddlctl = 0x3C3E4244, 503 .p0_mpwrdlctl = 0x34363638, 504 }; 505 506 static struct mx6_ddr3_cfg mem_ddr = { 507 .mem_speed = 1600, 508 .density = 4, 509 .width = 32, 510 .banks = 8, 511 .rowaddr = 15, 512 .coladdr = 10, 513 .pagesz = 2, 514 .trcd = 1375, 515 .trcmin = 4875, 516 .trasmin = 3500, 517 }; 518 519 static void ccgr_init(void) 520 { 521 struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; 522 523 writel(0xFFFFFFFF, &ccm->CCGR0); 524 writel(0xFFFFFFFF, &ccm->CCGR1); 525 writel(0xFFFFFFFF, &ccm->CCGR2); 526 writel(0xFFFFFFFF, &ccm->CCGR3); 527 writel(0xFFFFFFFF, &ccm->CCGR4); 528 writel(0xFFFFFFFF, &ccm->CCGR5); 529 writel(0xFFFFFFFF, &ccm->CCGR6); 530 writel(0xFFFFFFFF, &ccm->CCGR7); 531 } 532 533 static void spl_dram_init(void) 534 { 535 struct mx6_ddr_sysinfo sysinfo = { 536 .dsize = mem_ddr.width/32, 537 .cs_density = 24, 538 .ncs = 1, 539 .cs1_mirror = 0, 540 .rtt_wr = 2, 541 .rtt_nom = 2, /* RTT_Nom = RZQ/2 */ 542 .walat = 1, /* Write additional latency */ 543 .ralat = 5, /* Read additional latency */ 544 .mif3_mode = 3, /* Command prediction working mode */ 545 .bi_on = 1, /* Bank interleaving enabled */ 546 .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ 547 .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ 548 .ddr_type = DDR_TYPE_DDR3, 549 .refsel = 1, /* Refresh cycles at 32KHz */ 550 .refr = 7, /* 8 refresh commands per refresh cycle */ 551 }; 552 553 mx6sx_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs); 554 mx6_dram_cfg(&sysinfo, &mx6_mmcd_calib, &mem_ddr); 555 } 556 557 void board_init_f(ulong dummy) 558 { 559 /* setup AIPS and disable watchdog */ 560 arch_cpu_init(); 561 562 ccgr_init(); 563 564 /* iomux and setup of i2c */ 565 board_early_init_f(); 566 567 /* setup GP timer */ 568 timer_init(); 569 570 /* UART clocks enabled and gd valid - init serial console */ 571 preloader_console_init(); 572 573 /* DDR initialization */ 574 spl_dram_init(); 575 576 /* Clear the BSS. */ 577 memset(__bss_start, 0, __bss_end - __bss_start); 578 579 /* load/boot image from boot device */ 580 board_init_r(NULL, 0); 581 } 582 #endif 583