1 /* 2 * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <asm/io.h> 9 #include <asm/arch/imx-regs.h> 10 #include <asm/arch/mx6-pins.h> 11 #include <asm/arch/clock.h> 12 #include <asm/errno.h> 13 #include <asm/gpio.h> 14 #include <asm/imx-common/iomux-v3.h> 15 #include <mmc.h> 16 #include <fsl_esdhc.h> 17 #include <miiphy.h> 18 #include <netdev.h> 19 20 DECLARE_GLOBAL_DATA_PTR; 21 22 #define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ 23 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ 24 PAD_CTL_SRE_FAST | PAD_CTL_HYS) 25 26 #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ 27 PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ 28 PAD_CTL_SRE_FAST | PAD_CTL_HYS) 29 30 #define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ 31 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) 32 33 int dram_init(void) 34 { 35 #if defined(CONFIG_MX6DL) && !defined(CONFIG_MX6DL_LPDDR2) && \ 36 defined(CONFIG_DDR_32BIT) 37 gd->ram_size = ((phys_size_t)CONFIG_DDR_MB * 1024 * 1024) / 2; 38 #else 39 gd->ram_size = (phys_size_t)CONFIG_DDR_MB * 1024 * 1024; 40 #endif 41 42 return 0; 43 } 44 45 iomux_v3_cfg_t const uart4_pads[] = { 46 MX6_PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), 47 MX6_PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), 48 }; 49 50 iomux_v3_cfg_t const usdhc3_pads[] = { 51 MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), 52 MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 53 MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 54 MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 55 MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 56 MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 57 MX6_PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 58 MX6_PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 59 MX6_PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 60 MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 61 MX6_PAD_NANDF_CS0__GPIO6_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ 62 }; 63 64 iomux_v3_cfg_t const usdhc4_pads[] = { 65 MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), 66 MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 67 MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 68 MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 69 MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 70 MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 71 MX6_PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 72 MX6_PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 73 MX6_PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 74 MX6_PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 75 }; 76 77 iomux_v3_cfg_t const enet_pads[] = { 78 MX6_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), 79 MX6_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), 80 MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), 81 MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), 82 MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), 83 MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), 84 MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), 85 MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), 86 MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), 87 MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), 88 MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), 89 MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), 90 MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), 91 MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), 92 MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), 93 }; 94 95 96 static void setup_iomux_uart(void) 97 { 98 imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads)); 99 } 100 101 static void setup_iomux_enet(void) 102 { 103 imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); 104 } 105 106 #ifdef CONFIG_FSL_ESDHC 107 struct fsl_esdhc_cfg usdhc_cfg[2] = { 108 {USDHC3_BASE_ADDR}, 109 {USDHC4_BASE_ADDR}, 110 }; 111 112 int board_mmc_getcd(struct mmc *mmc) 113 { 114 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 115 int ret; 116 117 if (cfg->esdhc_base == USDHC3_BASE_ADDR) { 118 gpio_direction_input(IMX_GPIO_NR(6, 11)); 119 ret = !gpio_get_value(IMX_GPIO_NR(6, 11)); 120 } else /* Don't have the CD GPIO pin on board */ 121 ret = 1; 122 123 return ret; 124 } 125 126 int board_mmc_init(bd_t *bis) 127 { 128 s32 status = 0; 129 u32 index = 0; 130 131 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); 132 usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); 133 134 for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { 135 switch (index) { 136 case 0: 137 imx_iomux_v3_setup_multiple_pads( 138 usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); 139 break; 140 case 1: 141 imx_iomux_v3_setup_multiple_pads( 142 usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); 143 break; 144 default: 145 printf("Warning: you configured more USDHC controllers" 146 "(%d) then supported by the board (%d)\n", 147 index + 1, CONFIG_SYS_FSL_USDHC_NUM); 148 return status; 149 } 150 151 status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]); 152 } 153 154 return status; 155 } 156 #endif 157 158 #define MII_MMD_ACCESS_CTRL_REG 0xd 159 #define MII_MMD_ACCESS_ADDR_DATA_REG 0xe 160 #define MII_DBG_PORT_REG 0x1d 161 #define MII_DBG_PORT2_REG 0x1e 162 163 int fecmxc_mii_postcall(int phy) 164 { 165 unsigned short val; 166 167 /* 168 * Due to the i.MX6Q Armadillo2 board HW design,there is 169 * no 125Mhz clock input from SOC. In order to use RGMII, 170 * We need enable AR8031 ouput a 125MHz clk from CLK_25M 171 */ 172 miiphy_write("FEC", phy, MII_MMD_ACCESS_CTRL_REG, 0x7); 173 miiphy_write("FEC", phy, MII_MMD_ACCESS_ADDR_DATA_REG, 0x8016); 174 miiphy_write("FEC", phy, MII_MMD_ACCESS_CTRL_REG, 0x4007); 175 miiphy_read("FEC", phy, MII_MMD_ACCESS_ADDR_DATA_REG, &val); 176 val &= 0xffe3; 177 val |= 0x18; 178 miiphy_write("FEC", phy, MII_MMD_ACCESS_ADDR_DATA_REG, val); 179 180 /* For the RGMII phy, we need enable tx clock delay */ 181 miiphy_write("FEC", phy, MII_DBG_PORT_REG, 0x5); 182 miiphy_read("FEC", phy, MII_DBG_PORT2_REG, &val); 183 val |= 0x0100; 184 miiphy_write("FEC", phy, MII_DBG_PORT2_REG, val); 185 186 miiphy_write("FEC", phy, MII_BMCR, 0xa100); 187 188 return 0; 189 } 190 191 int board_eth_init(bd_t *bis) 192 { 193 struct eth_device *dev; 194 int ret = cpu_eth_init(bis); 195 196 if (ret) 197 return ret; 198 199 dev = eth_get_dev_by_name("FEC"); 200 if (!dev) { 201 printf("FEC MXC: Unable to get FEC device entry\n"); 202 return -EINVAL; 203 } 204 205 ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall); 206 if (ret) { 207 printf("FEC MXC: Unable to register FEC mii postcall\n"); 208 return ret; 209 } 210 211 return 0; 212 } 213 214 int board_early_init_f(void) 215 { 216 setup_iomux_uart(); 217 setup_iomux_enet(); 218 219 return 0; 220 } 221 222 int board_init(void) 223 { 224 /* address of boot parameters */ 225 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; 226 227 return 0; 228 } 229 230 int checkboard(void) 231 { 232 #ifdef CONFIG_MX6DL 233 puts("Board: MX6DL-Armadillo2\n"); 234 #else 235 puts("Board: MX6Q-Armadillo2\n"); 236 #endif 237 238 return 0; 239 } 240