1 /* 2 * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 #include <common.h> 24 #include <asm/io.h> 25 #include <asm/arch/imx-regs.h> 26 #include <asm/arch/mx6x_pins.h> 27 #include <asm/errno.h> 28 #include <asm/gpio.h> 29 #include <asm/imx-common/iomux-v3.h> 30 #include <mmc.h> 31 #include <fsl_esdhc.h> 32 #include <miiphy.h> 33 #include <netdev.h> 34 35 DECLARE_GLOBAL_DATA_PTR; 36 37 #define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ 38 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ 39 PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) 40 41 #define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ 42 PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ 43 PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) 44 45 #define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ 46 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ 47 PAD_CTL_DSE_40ohm | PAD_CTL_HYS) 48 49 int dram_init(void) 50 { 51 gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); 52 53 return 0; 54 } 55 56 iomux_v3_cfg_t uart4_pads[] = { 57 MX6Q_PAD_KEY_COL0__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), 58 MX6Q_PAD_KEY_ROW0__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), 59 }; 60 61 iomux_v3_cfg_t usdhc3_pads[] = { 62 MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), 63 MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 64 MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 65 MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 66 MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 67 MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 68 MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 69 MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 70 MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 71 MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 72 MX6Q_PAD_NANDF_CS0__GPIO_6_11 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ 73 }; 74 75 iomux_v3_cfg_t usdhc4_pads[] = { 76 MX6Q_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), 77 MX6Q_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 78 MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 79 MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 80 MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 81 MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 82 MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 83 MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 84 MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 85 MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 86 }; 87 88 iomux_v3_cfg_t enet_pads[] = { 89 MX6Q_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), 90 MX6Q_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), 91 MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), 92 MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), 93 MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), 94 MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), 95 MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), 96 MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), 97 MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), 98 MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), 99 MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), 100 MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), 101 MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), 102 MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), 103 MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), 104 }; 105 106 107 static void setup_iomux_uart(void) 108 { 109 imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads)); 110 } 111 112 static void setup_iomux_enet(void) 113 { 114 imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); 115 } 116 117 #ifdef CONFIG_FSL_ESDHC 118 struct fsl_esdhc_cfg usdhc_cfg[2] = { 119 {USDHC3_BASE_ADDR, 1}, 120 {USDHC4_BASE_ADDR, 1}, 121 }; 122 123 int board_mmc_getcd(struct mmc *mmc) 124 { 125 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 126 int ret; 127 128 if (cfg->esdhc_base == USDHC3_BASE_ADDR) { 129 gpio_direction_input(171); /*GPIO6_11*/ 130 ret = !gpio_get_value(171); 131 } else /* Don't have the CD GPIO pin on board */ 132 ret = 1; 133 134 return ret; 135 } 136 137 int board_mmc_init(bd_t *bis) 138 { 139 s32 status = 0; 140 u32 index = 0; 141 142 for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { 143 switch (index) { 144 case 0: 145 imx_iomux_v3_setup_multiple_pads( 146 usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); 147 break; 148 case 1: 149 imx_iomux_v3_setup_multiple_pads( 150 usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); 151 break; 152 default: 153 printf("Warning: you configured more USDHC controllers" 154 "(%d) then supported by the board (%d)\n", 155 index + 1, CONFIG_SYS_FSL_USDHC_NUM); 156 return status; 157 } 158 159 status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]); 160 } 161 162 return status; 163 } 164 #endif 165 166 #define MII_MMD_ACCESS_CTRL_REG 0xd 167 #define MII_MMD_ACCESS_ADDR_DATA_REG 0xe 168 #define MII_DBG_PORT_REG 0x1d 169 #define MII_DBG_PORT2_REG 0x1e 170 171 int fecmxc_mii_postcall(int phy) 172 { 173 unsigned short val; 174 175 /* 176 * Due to the i.MX6Q Armadillo2 board HW design,there is 177 * no 125Mhz clock input from SOC. In order to use RGMII, 178 * We need enable AR8031 ouput a 125MHz clk from CLK_25M 179 */ 180 miiphy_write("FEC", phy, MII_MMD_ACCESS_CTRL_REG, 0x7); 181 miiphy_write("FEC", phy, MII_MMD_ACCESS_ADDR_DATA_REG, 0x8016); 182 miiphy_write("FEC", phy, MII_MMD_ACCESS_CTRL_REG, 0x4007); 183 miiphy_read("FEC", phy, MII_MMD_ACCESS_ADDR_DATA_REG, &val); 184 val &= 0xffe3; 185 val |= 0x18; 186 miiphy_write("FEC", phy, MII_MMD_ACCESS_ADDR_DATA_REG, val); 187 188 /* For the RGMII phy, we need enable tx clock delay */ 189 miiphy_write("FEC", phy, MII_DBG_PORT_REG, 0x5); 190 miiphy_read("FEC", phy, MII_DBG_PORT2_REG, &val); 191 val |= 0x0100; 192 miiphy_write("FEC", phy, MII_DBG_PORT2_REG, val); 193 194 miiphy_write("FEC", phy, MII_BMCR, 0xa100); 195 196 return 0; 197 } 198 199 int board_eth_init(bd_t *bis) 200 { 201 struct eth_device *dev; 202 int ret; 203 204 ret = cpu_eth_init(bis); 205 if (ret) { 206 printf("FEC MXC: %s:failed\n", __func__); 207 return ret; 208 } 209 210 dev = eth_get_dev_by_name("FEC"); 211 if (!dev) { 212 printf("FEC MXC: Unable to get FEC device entry\n"); 213 return -EINVAL; 214 } 215 216 ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall); 217 if (ret) { 218 printf("FEC MXC: Unable to register FEC mii postcall\n"); 219 return ret; 220 } 221 222 return 0; 223 } 224 225 int board_early_init_f(void) 226 { 227 setup_iomux_uart(); 228 setup_iomux_enet(); 229 230 return 0; 231 } 232 233 int board_init(void) 234 { 235 /* address of boot parameters */ 236 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; 237 238 return 0; 239 } 240 241 int checkboard(void) 242 { 243 puts("Board: MX6Q-Armadillo2\n"); 244 245 return 0; 246 } 247