1 /* 2 * (C) Copyright 2011 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 #include <common.h> 24 #include <asm/io.h> 25 #include <asm/arch/imx-regs.h> 26 #include <asm/arch/mx5x_pins.h> 27 #include <asm/arch/sys_proto.h> 28 #include <asm/arch/crm_regs.h> 29 #include <asm/arch/iomux.h> 30 #include <asm/errno.h> 31 #include <netdev.h> 32 #include <mmc.h> 33 #include <fsl_esdhc.h> 34 #include <asm/gpio.h> 35 36 DECLARE_GLOBAL_DATA_PTR; 37 38 int dram_init(void) 39 { 40 u32 size1, size2; 41 42 size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); 43 size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); 44 45 gd->ram_size = size1 + size2; 46 47 return 0; 48 } 49 void dram_init_banksize(void) 50 { 51 gd->bd->bi_dram[0].start = PHYS_SDRAM_1; 52 gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; 53 54 gd->bd->bi_dram[1].start = PHYS_SDRAM_2; 55 gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; 56 } 57 58 static void setup_iomux_uart(void) 59 { 60 /* UART1 RXD */ 61 mxc_request_iomux(MX53_PIN_CSI0_D11, IOMUX_CONFIG_ALT2); 62 mxc_iomux_set_pad(MX53_PIN_CSI0_D11, 63 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 64 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 65 PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU | 66 PAD_CTL_ODE_OPENDRAIN_ENABLE); 67 mxc_iomux_set_input(MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, 0x1); 68 69 /* UART1 TXD */ 70 mxc_request_iomux(MX53_PIN_CSI0_D10, IOMUX_CONFIG_ALT2); 71 mxc_iomux_set_pad(MX53_PIN_CSI0_D10, 72 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 73 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 74 PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU | 75 PAD_CTL_ODE_OPENDRAIN_ENABLE); 76 } 77 78 static void setup_iomux_fec(void) 79 { 80 /*FEC_MDIO*/ 81 mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0); 82 mxc_iomux_set_pad(MX53_PIN_FEC_MDIO, 83 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 84 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 85 PAD_CTL_22K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE); 86 mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1); 87 88 /*FEC_MDC*/ 89 mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0); 90 mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH); 91 92 /* FEC RXD1 */ 93 mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0); 94 mxc_iomux_set_pad(MX53_PIN_FEC_RXD1, 95 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); 96 97 /* FEC RXD0 */ 98 mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0); 99 mxc_iomux_set_pad(MX53_PIN_FEC_RXD0, 100 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); 101 102 /* FEC TXD1 */ 103 mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0); 104 mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH); 105 106 /* FEC TXD0 */ 107 mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0); 108 mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH); 109 110 /* FEC TX_EN */ 111 mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0); 112 mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH); 113 114 /* FEC TX_CLK */ 115 mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0); 116 mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK, 117 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); 118 119 /* FEC RX_ER */ 120 mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0); 121 mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER, 122 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); 123 124 /* FEC CRS */ 125 mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0); 126 mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV, 127 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); 128 } 129 130 #ifdef CONFIG_FSL_ESDHC 131 struct fsl_esdhc_cfg esdhc_cfg[1] = { 132 {MMC_SDHC1_BASE_ADDR}, 133 }; 134 135 int board_mmc_getcd(struct mmc *mmc) 136 { 137 mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1); 138 gpio_direction_input(IMX_GPIO_NR(3, 13)); 139 return !gpio_get_value(IMX_GPIO_NR(3, 13)); 140 } 141 142 int board_mmc_init(bd_t *bis) 143 { 144 u32 index; 145 s32 status = 0; 146 147 for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { 148 switch (index) { 149 case 0: 150 mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0); 151 mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0); 152 mxc_request_iomux(MX53_PIN_SD1_DATA0, 153 IOMUX_CONFIG_ALT0); 154 mxc_request_iomux(MX53_PIN_SD1_DATA1, 155 IOMUX_CONFIG_ALT0); 156 mxc_request_iomux(MX53_PIN_SD1_DATA2, 157 IOMUX_CONFIG_ALT0); 158 mxc_request_iomux(MX53_PIN_SD1_DATA3, 159 IOMUX_CONFIG_ALT0); 160 mxc_request_iomux(MX53_PIN_EIM_DA13, 161 IOMUX_CONFIG_ALT1); 162 163 mxc_iomux_set_pad(MX53_PIN_SD1_CMD, 164 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 165 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 166 PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU); 167 mxc_iomux_set_pad(MX53_PIN_SD1_CLK, 168 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 169 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | 170 PAD_CTL_DRV_HIGH); 171 mxc_iomux_set_pad(MX53_PIN_SD1_DATA0, 172 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 173 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 174 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 175 mxc_iomux_set_pad(MX53_PIN_SD1_DATA1, 176 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 177 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 178 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 179 mxc_iomux_set_pad(MX53_PIN_SD1_DATA2, 180 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 181 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 182 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 183 mxc_iomux_set_pad(MX53_PIN_SD1_DATA3, 184 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 185 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 186 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 187 break; 188 189 default: 190 printf("Warning: you configured more ESDHC controller" 191 "(%d) as supported by the board(1)\n", 192 CONFIG_SYS_FSL_ESDHC_NUM); 193 return status; 194 } 195 status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]); 196 } 197 198 return status; 199 } 200 #endif 201 202 int board_early_init_f(void) 203 { 204 setup_iomux_uart(); 205 setup_iomux_fec(); 206 207 return 0; 208 } 209 210 int board_init(void) 211 { 212 /* address of boot parameters */ 213 gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; 214 215 return 0; 216 } 217 218 int checkboard(void) 219 { 220 puts("Board: MX53SMD\n"); 221 222 return 0; 223 } 224