1 /* 2 * Copyright (C) 2011 Freescale Semiconductor, Inc. 3 * Jason Liu <r64343@freescale.com> 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 24 #include <common.h> 25 #include <asm/io.h> 26 #include <asm/arch/imx-regs.h> 27 #include <asm/arch/mx5x_pins.h> 28 #include <asm/arch/sys_proto.h> 29 #include <asm/arch/crm_regs.h> 30 #include <asm/arch/clock.h> 31 #include <asm/arch/iomux.h> 32 #include <asm/arch/clock.h> 33 #include <asm/errno.h> 34 #include <netdev.h> 35 #include <i2c.h> 36 #include <mmc.h> 37 #include <fsl_esdhc.h> 38 #include <asm/gpio.h> 39 #include <pmic.h> 40 #include <dialog_pmic.h> 41 #include <fsl_pmic.h> 42 #include <linux/fb.h> 43 #include <ipu_pixfmt.h> 44 45 #define MX53LOCO_LCD_POWER IMX_GPIO_NR(3, 24) 46 47 DECLARE_GLOBAL_DATA_PTR; 48 49 int dram_init(void) 50 { 51 u32 size1, size2; 52 53 size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); 54 size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); 55 56 gd->ram_size = size1 + size2; 57 58 return 0; 59 } 60 void dram_init_banksize(void) 61 { 62 gd->bd->bi_dram[0].start = PHYS_SDRAM_1; 63 gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; 64 65 gd->bd->bi_dram[1].start = PHYS_SDRAM_2; 66 gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; 67 } 68 69 u32 get_board_rev(void) 70 { 71 struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE; 72 struct fuse_bank *bank = &iim->bank[0]; 73 struct fuse_bank0_regs *fuse = 74 (struct fuse_bank0_regs *)bank->fuse_regs; 75 76 int rev = readl(&fuse->gp[6]); 77 78 if (!i2c_probe(CONFIG_SYS_DIALOG_PMIC_I2C_ADDR)) 79 rev = 0; 80 81 return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8; 82 } 83 84 static void setup_iomux_uart(void) 85 { 86 /* UART1 RXD */ 87 mxc_request_iomux(MX53_PIN_CSI0_D11, IOMUX_CONFIG_ALT2); 88 mxc_iomux_set_pad(MX53_PIN_CSI0_D11, 89 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 90 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 91 PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU | 92 PAD_CTL_ODE_OPENDRAIN_ENABLE); 93 mxc_iomux_set_input(MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, 0x1); 94 95 /* UART1 TXD */ 96 mxc_request_iomux(MX53_PIN_CSI0_D10, IOMUX_CONFIG_ALT2); 97 mxc_iomux_set_pad(MX53_PIN_CSI0_D10, 98 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 99 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 100 PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU | 101 PAD_CTL_ODE_OPENDRAIN_ENABLE); 102 } 103 104 #ifdef CONFIG_USB_EHCI_MX5 105 int board_ehci_hcd_init(int port) 106 { 107 /* request VBUS power enable pin, GPIO7_8 */ 108 mxc_request_iomux(MX53_PIN_ATA_DA_2, IOMUX_CONFIG_ALT1); 109 gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_2), 1); 110 return 0; 111 } 112 #endif 113 114 static void setup_iomux_fec(void) 115 { 116 /*FEC_MDIO*/ 117 mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0); 118 mxc_iomux_set_pad(MX53_PIN_FEC_MDIO, 119 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 120 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 121 PAD_CTL_22K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE); 122 mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1); 123 124 /*FEC_MDC*/ 125 mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0); 126 mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH); 127 128 /* FEC RXD1 */ 129 mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0); 130 mxc_iomux_set_pad(MX53_PIN_FEC_RXD1, 131 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); 132 133 /* FEC RXD0 */ 134 mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0); 135 mxc_iomux_set_pad(MX53_PIN_FEC_RXD0, 136 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); 137 138 /* FEC TXD1 */ 139 mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0); 140 mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH); 141 142 /* FEC TXD0 */ 143 mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0); 144 mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH); 145 146 /* FEC TX_EN */ 147 mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0); 148 mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH); 149 150 /* FEC TX_CLK */ 151 mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0); 152 mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK, 153 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); 154 155 /* FEC RX_ER */ 156 mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0); 157 mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER, 158 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); 159 160 /* FEC CRS */ 161 mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0); 162 mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV, 163 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); 164 } 165 166 #ifdef CONFIG_FSL_ESDHC 167 struct fsl_esdhc_cfg esdhc_cfg[2] = { 168 {MMC_SDHC1_BASE_ADDR}, 169 {MMC_SDHC3_BASE_ADDR}, 170 }; 171 172 int board_mmc_getcd(struct mmc *mmc) 173 { 174 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 175 int ret; 176 177 mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1); 178 gpio_direction_input(IMX_GPIO_NR(3, 11)); 179 mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1); 180 gpio_direction_input(IMX_GPIO_NR(3, 13)); 181 182 if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) 183 ret = !gpio_get_value(IMX_GPIO_NR(3, 13)); 184 else 185 ret = !gpio_get_value(IMX_GPIO_NR(3, 11)); 186 187 return ret; 188 } 189 190 int board_mmc_init(bd_t *bis) 191 { 192 u32 index; 193 s32 status = 0; 194 195 esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); 196 esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); 197 198 for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { 199 switch (index) { 200 case 0: 201 mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0); 202 mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0); 203 mxc_request_iomux(MX53_PIN_SD1_DATA0, 204 IOMUX_CONFIG_ALT0); 205 mxc_request_iomux(MX53_PIN_SD1_DATA1, 206 IOMUX_CONFIG_ALT0); 207 mxc_request_iomux(MX53_PIN_SD1_DATA2, 208 IOMUX_CONFIG_ALT0); 209 mxc_request_iomux(MX53_PIN_SD1_DATA3, 210 IOMUX_CONFIG_ALT0); 211 mxc_request_iomux(MX53_PIN_EIM_DA13, 212 IOMUX_CONFIG_ALT1); 213 214 mxc_iomux_set_pad(MX53_PIN_SD1_CMD, 215 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 216 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 217 PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU); 218 mxc_iomux_set_pad(MX53_PIN_SD1_CLK, 219 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 220 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | 221 PAD_CTL_DRV_HIGH); 222 mxc_iomux_set_pad(MX53_PIN_SD1_DATA0, 223 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 224 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 225 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 226 mxc_iomux_set_pad(MX53_PIN_SD1_DATA1, 227 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 228 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 229 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 230 mxc_iomux_set_pad(MX53_PIN_SD1_DATA2, 231 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 232 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 233 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 234 mxc_iomux_set_pad(MX53_PIN_SD1_DATA3, 235 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 236 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 237 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 238 break; 239 case 1: 240 mxc_request_iomux(MX53_PIN_ATA_RESET_B, 241 IOMUX_CONFIG_ALT2); 242 mxc_request_iomux(MX53_PIN_ATA_IORDY, 243 IOMUX_CONFIG_ALT2); 244 mxc_request_iomux(MX53_PIN_ATA_DATA8, 245 IOMUX_CONFIG_ALT4); 246 mxc_request_iomux(MX53_PIN_ATA_DATA9, 247 IOMUX_CONFIG_ALT4); 248 mxc_request_iomux(MX53_PIN_ATA_DATA10, 249 IOMUX_CONFIG_ALT4); 250 mxc_request_iomux(MX53_PIN_ATA_DATA11, 251 IOMUX_CONFIG_ALT4); 252 mxc_request_iomux(MX53_PIN_ATA_DATA0, 253 IOMUX_CONFIG_ALT4); 254 mxc_request_iomux(MX53_PIN_ATA_DATA1, 255 IOMUX_CONFIG_ALT4); 256 mxc_request_iomux(MX53_PIN_ATA_DATA2, 257 IOMUX_CONFIG_ALT4); 258 mxc_request_iomux(MX53_PIN_ATA_DATA3, 259 IOMUX_CONFIG_ALT4); 260 mxc_request_iomux(MX53_PIN_EIM_DA11, 261 IOMUX_CONFIG_ALT1); 262 263 mxc_iomux_set_pad(MX53_PIN_ATA_RESET_B, 264 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 265 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 266 PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU); 267 mxc_iomux_set_pad(MX53_PIN_ATA_IORDY, 268 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 269 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | 270 PAD_CTL_DRV_HIGH); 271 mxc_iomux_set_pad(MX53_PIN_ATA_DATA8, 272 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 273 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 274 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 275 mxc_iomux_set_pad(MX53_PIN_ATA_DATA9, 276 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 277 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 278 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 279 mxc_iomux_set_pad(MX53_PIN_ATA_DATA10, 280 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 281 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 282 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 283 mxc_iomux_set_pad(MX53_PIN_ATA_DATA11, 284 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 285 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 286 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 287 mxc_iomux_set_pad(MX53_PIN_ATA_DATA0, 288 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 289 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 290 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 291 mxc_iomux_set_pad(MX53_PIN_ATA_DATA1, 292 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 293 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 294 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 295 mxc_iomux_set_pad(MX53_PIN_ATA_DATA2, 296 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 297 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 298 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 299 mxc_iomux_set_pad(MX53_PIN_ATA_DATA3, 300 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 301 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 302 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 303 304 break; 305 default: 306 printf("Warning: you configured more ESDHC controller" 307 "(%d) as supported by the board(2)\n", 308 CONFIG_SYS_FSL_ESDHC_NUM); 309 return status; 310 } 311 status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]); 312 } 313 314 return status; 315 } 316 #endif 317 318 static void setup_iomux_i2c(void) 319 { 320 /* I2C1 SDA */ 321 mxc_request_iomux(MX53_PIN_CSI0_D8, 322 IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION); 323 mxc_iomux_set_input(MX53_I2C1_IPP_SDA_IN_SELECT_INPUT, 324 INPUT_CTL_PATH0); 325 mxc_iomux_set_pad(MX53_PIN_CSI0_D8, 326 PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | 327 PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE | 328 PAD_CTL_PUE_PULL | 329 PAD_CTL_ODE_OPENDRAIN_ENABLE); 330 /* I2C1 SCL */ 331 mxc_request_iomux(MX53_PIN_CSI0_D9, 332 IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION); 333 mxc_iomux_set_input(MX53_I2C1_IPP_SCL_IN_SELECT_INPUT, 334 INPUT_CTL_PATH0); 335 mxc_iomux_set_pad(MX53_PIN_CSI0_D9, 336 PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | 337 PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE | 338 PAD_CTL_PUE_PULL | 339 PAD_CTL_ODE_OPENDRAIN_ENABLE); 340 } 341 342 static int power_init(void) 343 { 344 unsigned int val; 345 int ret = -1; 346 struct pmic *p; 347 348 if (!i2c_probe(CONFIG_SYS_DIALOG_PMIC_I2C_ADDR)) { 349 pmic_dialog_init(); 350 p = get_pmic(); 351 352 /* Set VDDA to 1.25V */ 353 val = DA9052_BUCKCORE_BCOREEN | DA_BUCKCORE_VBCORE_1_250V; 354 ret = pmic_reg_write(p, DA9053_BUCKCORE_REG, val); 355 356 ret |= pmic_reg_read(p, DA9053_SUPPLY_REG, &val); 357 val |= DA9052_SUPPLY_VBCOREGO; 358 ret |= pmic_reg_write(p, DA9053_SUPPLY_REG, val); 359 360 /* Set Vcc peripheral to 1.30V */ 361 ret |= pmic_reg_write(p, DA9053_BUCKPRO_REG, 0x62); 362 ret |= pmic_reg_write(p, DA9053_SUPPLY_REG, 0x62); 363 } 364 365 if (!i2c_probe(CONFIG_SYS_FSL_PMIC_I2C_ADDR)) { 366 pmic_init(); 367 p = get_pmic(); 368 369 /* Set VDDGP to 1.25V for 1GHz on SW1 */ 370 pmic_reg_read(p, REG_SW_0, &val); 371 val = (val & ~SWx_VOLT_MASK_MC34708) | SWx_1_250V_MC34708; 372 ret = pmic_reg_write(p, REG_SW_0, val); 373 374 /* Set VCC as 1.30V on SW2 */ 375 pmic_reg_read(p, REG_SW_1, &val); 376 val = (val & ~SWx_VOLT_MASK_MC34708) | SWx_1_300V_MC34708; 377 ret |= pmic_reg_write(p, REG_SW_1, val); 378 379 /* Set global reset timer to 4s */ 380 pmic_reg_read(p, REG_POWER_CTL2, &val); 381 val = (val & ~TIMER_MASK_MC34708) | TIMER_4S_MC34708; 382 ret |= pmic_reg_write(p, REG_POWER_CTL2, val); 383 384 /* Set VUSBSEL and VUSBEN for USB PHY supply*/ 385 pmic_reg_read(p, REG_MODE_0, &val); 386 val |= (VUSBSEL_MC34708 | VUSBEN_MC34708); 387 ret |= pmic_reg_write(p, REG_MODE_0, val); 388 389 /* Set SWBST to 5V in auto mode */ 390 val = SWBST_AUTO; 391 ret |= pmic_reg_write(p, SWBST_CTRL, val); 392 } 393 394 return ret; 395 } 396 397 static void clock_1GHz(void) 398 { 399 int ret; 400 u32 ref_clk = MXC_HCLK; 401 /* 402 * After increasing voltage to 1.25V, we can switch 403 * CPU clock to 1GHz and DDR to 400MHz safely 404 */ 405 ret = mxc_set_clock(ref_clk, 1000, MXC_ARM_CLK); 406 if (ret) 407 printf("CPU: Switch CPU clock to 1GHZ failed\n"); 408 409 ret = mxc_set_clock(ref_clk, 400, MXC_PERIPH_CLK); 410 ret |= mxc_set_clock(ref_clk, 400, MXC_DDR_CLK); 411 if (ret) 412 printf("CPU: Switch DDR clock to 400MHz failed\n"); 413 } 414 415 static struct fb_videomode claa_wvga = { 416 .name = "CLAA07LC0ACW", 417 .refresh = 57, 418 .xres = 800, 419 .yres = 480, 420 .pixclock = 37037, 421 .left_margin = 40, 422 .right_margin = 60, 423 .upper_margin = 10, 424 .lower_margin = 10, 425 .hsync_len = 20, 426 .vsync_len = 10, 427 .sync = 0, 428 .vmode = FB_VMODE_NONINTERLACED 429 }; 430 431 void lcd_iomux(void) 432 { 433 mxc_request_iomux(MX53_PIN_DI0_DISP_CLK, IOMUX_CONFIG_ALT0); 434 mxc_request_iomux(MX53_PIN_DI0_PIN15, IOMUX_CONFIG_ALT0); 435 mxc_request_iomux(MX53_PIN_DI0_PIN2, IOMUX_CONFIG_ALT0); 436 mxc_request_iomux(MX53_PIN_DI0_PIN3, IOMUX_CONFIG_ALT0); 437 mxc_request_iomux(MX53_PIN_DISP0_DAT0, IOMUX_CONFIG_ALT0); 438 mxc_request_iomux(MX53_PIN_DISP0_DAT1, IOMUX_CONFIG_ALT0); 439 mxc_request_iomux(MX53_PIN_DISP0_DAT2, IOMUX_CONFIG_ALT0); 440 mxc_request_iomux(MX53_PIN_DISP0_DAT3, IOMUX_CONFIG_ALT0); 441 mxc_request_iomux(MX53_PIN_DISP0_DAT4, IOMUX_CONFIG_ALT0); 442 mxc_request_iomux(MX53_PIN_DISP0_DAT5, IOMUX_CONFIG_ALT0); 443 mxc_request_iomux(MX53_PIN_DISP0_DAT6, IOMUX_CONFIG_ALT0); 444 mxc_request_iomux(MX53_PIN_DISP0_DAT7, IOMUX_CONFIG_ALT0); 445 mxc_request_iomux(MX53_PIN_DISP0_DAT8, IOMUX_CONFIG_ALT0); 446 mxc_request_iomux(MX53_PIN_DISP0_DAT9, IOMUX_CONFIG_ALT0); 447 mxc_request_iomux(MX53_PIN_DISP0_DAT10, IOMUX_CONFIG_ALT0); 448 mxc_request_iomux(MX53_PIN_DISP0_DAT11, IOMUX_CONFIG_ALT0); 449 mxc_request_iomux(MX53_PIN_DISP0_DAT12, IOMUX_CONFIG_ALT0); 450 mxc_request_iomux(MX53_PIN_DISP0_DAT13, IOMUX_CONFIG_ALT0); 451 mxc_request_iomux(MX53_PIN_DISP0_DAT14, IOMUX_CONFIG_ALT0); 452 mxc_request_iomux(MX53_PIN_DISP0_DAT15, IOMUX_CONFIG_ALT0); 453 mxc_request_iomux(MX53_PIN_DISP0_DAT16, IOMUX_CONFIG_ALT0); 454 mxc_request_iomux(MX53_PIN_DISP0_DAT17, IOMUX_CONFIG_ALT0); 455 mxc_request_iomux(MX53_PIN_DISP0_DAT18, IOMUX_CONFIG_ALT0); 456 mxc_request_iomux(MX53_PIN_DISP0_DAT19, IOMUX_CONFIG_ALT0); 457 mxc_request_iomux(MX53_PIN_DISP0_DAT20, IOMUX_CONFIG_ALT0); 458 mxc_request_iomux(MX53_PIN_DISP0_DAT21, IOMUX_CONFIG_ALT0); 459 mxc_request_iomux(MX53_PIN_DISP0_DAT22, IOMUX_CONFIG_ALT0); 460 mxc_request_iomux(MX53_PIN_DISP0_DAT23, IOMUX_CONFIG_ALT0); 461 462 /* Turn on GPIO backlight */ 463 mxc_request_iomux(MX53_PIN_EIM_D24, IOMUX_CONFIG_ALT1); 464 gpio_direction_output(MX53LOCO_LCD_POWER, 1); 465 466 /* Turn on display contrast */ 467 mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1); 468 gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_1), 1); 469 } 470 471 void lcd_enable(void) 472 { 473 int ret = ipuv3_fb_init(&claa_wvga, 0, IPU_PIX_FMT_RGB565); 474 if (ret) 475 printf("LCD cannot be configured: %d\n", ret); 476 } 477 478 int board_early_init_f(void) 479 { 480 setup_iomux_uart(); 481 setup_iomux_fec(); 482 lcd_iomux(); 483 484 return 0; 485 } 486 487 int print_cpuinfo(void) 488 { 489 u32 cpurev; 490 491 cpurev = get_cpu_rev(); 492 printf("CPU: Freescale i.MX%x family rev%d.%d at %d MHz\n", 493 (cpurev & 0xFF000) >> 12, 494 (cpurev & 0x000F0) >> 4, 495 (cpurev & 0x0000F) >> 0, 496 mxc_get_clock(MXC_ARM_CLK) / 1000000); 497 printf("Reset cause: %s\n", get_reset_cause()); 498 return 0; 499 } 500 501 /* 502 * Do not overwrite the console 503 * Use always serial for U-Boot console 504 */ 505 int overwrite_console(void) 506 { 507 return 1; 508 } 509 510 int board_init(void) 511 { 512 gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; 513 514 mxc_set_sata_internal_clock(); 515 setup_iomux_i2c(); 516 if (!power_init()) 517 clock_1GHz(); 518 print_cpuinfo(); 519 520 lcd_enable(); 521 522 return 0; 523 } 524 525 int checkboard(void) 526 { 527 puts("Board: MX53 LOCO\n"); 528 529 return 0; 530 } 531