1 /* 2 * (C) Copyright 2010 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 #include <common.h> 24 #include <asm/io.h> 25 #include <asm/arch/imx-regs.h> 26 #include <asm/arch/mx5x_pins.h> 27 #include <asm/arch/sys_proto.h> 28 #include <asm/arch/crm_regs.h> 29 #include <asm/arch/iomux.h> 30 #include <asm/errno.h> 31 #include <netdev.h> 32 #include <i2c.h> 33 #include <mmc.h> 34 #include <fsl_esdhc.h> 35 #include <fsl_pmic.h> 36 #include <asm/gpio.h> 37 #include <mc13892.h> 38 39 DECLARE_GLOBAL_DATA_PTR; 40 41 u32 get_board_rev(void) 42 { 43 return get_cpu_rev(); 44 } 45 46 int dram_init(void) 47 { 48 /* dram_init must store complete ramsize in gd->ram_size */ 49 gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, 50 PHYS_SDRAM_1_SIZE); 51 return 0; 52 } 53 54 static void setup_iomux_uart(void) 55 { 56 /* UART1 RXD */ 57 mxc_request_iomux(MX53_PIN_CSI0_D11, IOMUX_CONFIG_ALT2); 58 mxc_iomux_set_pad(MX53_PIN_CSI0_D11, 59 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 60 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 61 PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU | 62 PAD_CTL_ODE_OPENDRAIN_ENABLE); 63 mxc_iomux_set_input(MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, 0x1); 64 65 /* UART1 TXD */ 66 mxc_request_iomux(MX53_PIN_CSI0_D10, IOMUX_CONFIG_ALT2); 67 mxc_iomux_set_pad(MX53_PIN_CSI0_D10, 68 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 69 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 70 PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU | 71 PAD_CTL_ODE_OPENDRAIN_ENABLE); 72 } 73 74 static void setup_i2c(unsigned int port_number) 75 { 76 switch (port_number) { 77 case 0: 78 /* i2c1 SDA */ 79 mxc_request_iomux(MX53_PIN_CSI0_D8, 80 IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION); 81 mxc_iomux_set_input(MX53_I2C1_IPP_SDA_IN_SELECT_INPUT, 82 INPUT_CTL_PATH0); 83 mxc_iomux_set_pad(MX53_PIN_CSI0_D8, 84 PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | 85 PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE | 86 PAD_CTL_ODE_OPENDRAIN_ENABLE); 87 /* i2c1 SCL */ 88 mxc_request_iomux(MX53_PIN_CSI0_D9, 89 IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION); 90 mxc_iomux_set_input(MX53_I2C1_IPP_SCL_IN_SELECT_INPUT, 91 INPUT_CTL_PATH0); 92 mxc_iomux_set_pad(MX53_PIN_CSI0_D9, 93 PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | 94 PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE | 95 PAD_CTL_ODE_OPENDRAIN_ENABLE); 96 break; 97 case 1: 98 /* i2c2 SDA */ 99 mxc_request_iomux(MX53_PIN_KEY_ROW3, 100 IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION); 101 mxc_iomux_set_input(MX53_I2C2_IPP_SDA_IN_SELECT_INPUT, 102 INPUT_CTL_PATH0); 103 mxc_iomux_set_pad(MX53_PIN_KEY_ROW3, 104 PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | 105 PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE | 106 PAD_CTL_ODE_OPENDRAIN_ENABLE); 107 108 /* i2c2 SCL */ 109 mxc_request_iomux(MX53_PIN_KEY_COL3, 110 IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION); 111 mxc_iomux_set_input(MX53_I2C2_IPP_SCL_IN_SELECT_INPUT, 112 INPUT_CTL_PATH0); 113 mxc_iomux_set_pad(MX53_PIN_KEY_COL3, 114 PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | 115 PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE | 116 PAD_CTL_ODE_OPENDRAIN_ENABLE); 117 break; 118 default: 119 printf("Warning: Wrong I2C port number\n"); 120 break; 121 } 122 } 123 124 void power_init(void) 125 { 126 unsigned int val; 127 128 /* Set VDDA to 1.25V */ 129 val = pmic_reg_read(REG_SW_2); 130 val &= ~SWX_OUT_MASK; 131 val |= SWX_OUT_1_25; 132 pmic_reg_write(REG_SW_2, val); 133 134 /* 135 * Need increase VCC and VDDA to 1.3V 136 * according to MX53 IC TO2 datasheet. 137 */ 138 if (is_soc_rev(CHIP_REV_2_0) == 0) { 139 /* Set VCC to 1.3V for TO2 */ 140 val = pmic_reg_read(REG_SW_1); 141 val &= ~SWX_OUT_MASK; 142 val |= SWX_OUT_1_30; 143 pmic_reg_write(REG_SW_1, val); 144 145 /* Set VDDA to 1.3V for TO2 */ 146 val = pmic_reg_read(REG_SW_2); 147 val &= ~SWX_OUT_MASK; 148 val |= SWX_OUT_1_30; 149 pmic_reg_write(REG_SW_2, val); 150 } 151 } 152 153 static void setup_iomux_fec(void) 154 { 155 /*FEC_MDIO*/ 156 mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0); 157 mxc_iomux_set_pad(MX53_PIN_FEC_MDIO, 158 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 159 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 160 PAD_CTL_22K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE); 161 mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1); 162 163 /*FEC_MDC*/ 164 mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0); 165 mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH); 166 167 /* FEC RXD1 */ 168 mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0); 169 mxc_iomux_set_pad(MX53_PIN_FEC_RXD1, 170 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); 171 172 /* FEC RXD0 */ 173 mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0); 174 mxc_iomux_set_pad(MX53_PIN_FEC_RXD0, 175 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); 176 177 /* FEC TXD1 */ 178 mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0); 179 mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH); 180 181 /* FEC TXD0 */ 182 mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0); 183 mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH); 184 185 /* FEC TX_EN */ 186 mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0); 187 mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH); 188 189 /* FEC TX_CLK */ 190 mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0); 191 mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK, 192 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); 193 194 /* FEC RX_ER */ 195 mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0); 196 mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER, 197 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); 198 199 /* FEC CRS */ 200 mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0); 201 mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV, 202 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); 203 } 204 205 #ifdef CONFIG_FSL_ESDHC 206 struct fsl_esdhc_cfg esdhc_cfg[2] = { 207 {MMC_SDHC1_BASE_ADDR, 1}, 208 {MMC_SDHC3_BASE_ADDR, 1}, 209 }; 210 211 int board_mmc_getcd(u8 *cd, struct mmc *mmc) 212 { 213 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 214 215 if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) 216 *cd = gpio_get_value(77); /*GPIO3_13*/ 217 else 218 *cd = gpio_get_value(75); /*GPIO3_11*/ 219 220 return 0; 221 } 222 223 int board_mmc_init(bd_t *bis) 224 { 225 u32 index; 226 s32 status = 0; 227 228 for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { 229 switch (index) { 230 case 0: 231 mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0); 232 mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0); 233 mxc_request_iomux(MX53_PIN_SD1_DATA0, 234 IOMUX_CONFIG_ALT0); 235 mxc_request_iomux(MX53_PIN_SD1_DATA1, 236 IOMUX_CONFIG_ALT0); 237 mxc_request_iomux(MX53_PIN_SD1_DATA2, 238 IOMUX_CONFIG_ALT0); 239 mxc_request_iomux(MX53_PIN_SD1_DATA3, 240 IOMUX_CONFIG_ALT0); 241 mxc_request_iomux(MX53_PIN_EIM_DA13, 242 IOMUX_CONFIG_ALT1); 243 244 mxc_iomux_set_pad(MX53_PIN_SD1_CMD, 245 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 246 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 247 PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU); 248 mxc_iomux_set_pad(MX53_PIN_SD1_CLK, 249 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 250 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | 251 PAD_CTL_DRV_HIGH); 252 mxc_iomux_set_pad(MX53_PIN_SD1_DATA0, 253 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 254 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 255 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 256 mxc_iomux_set_pad(MX53_PIN_SD1_DATA1, 257 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 258 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 259 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 260 mxc_iomux_set_pad(MX53_PIN_SD1_DATA2, 261 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 262 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 263 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 264 mxc_iomux_set_pad(MX53_PIN_SD1_DATA3, 265 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 266 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 267 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 268 break; 269 case 1: 270 mxc_request_iomux(MX53_PIN_ATA_RESET_B, 271 IOMUX_CONFIG_ALT2); 272 mxc_request_iomux(MX53_PIN_ATA_IORDY, 273 IOMUX_CONFIG_ALT2); 274 mxc_request_iomux(MX53_PIN_ATA_DATA8, 275 IOMUX_CONFIG_ALT4); 276 mxc_request_iomux(MX53_PIN_ATA_DATA9, 277 IOMUX_CONFIG_ALT4); 278 mxc_request_iomux(MX53_PIN_ATA_DATA10, 279 IOMUX_CONFIG_ALT4); 280 mxc_request_iomux(MX53_PIN_ATA_DATA11, 281 IOMUX_CONFIG_ALT4); 282 mxc_request_iomux(MX53_PIN_ATA_DATA0, 283 IOMUX_CONFIG_ALT4); 284 mxc_request_iomux(MX53_PIN_ATA_DATA1, 285 IOMUX_CONFIG_ALT4); 286 mxc_request_iomux(MX53_PIN_ATA_DATA2, 287 IOMUX_CONFIG_ALT4); 288 mxc_request_iomux(MX53_PIN_ATA_DATA3, 289 IOMUX_CONFIG_ALT4); 290 mxc_request_iomux(MX53_PIN_EIM_DA11, 291 IOMUX_CONFIG_ALT1); 292 293 mxc_iomux_set_pad(MX53_PIN_ATA_RESET_B, 294 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 295 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 296 PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU); 297 mxc_iomux_set_pad(MX53_PIN_ATA_IORDY, 298 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 299 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | 300 PAD_CTL_DRV_HIGH); 301 mxc_iomux_set_pad(MX53_PIN_ATA_DATA8, 302 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 303 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 304 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 305 mxc_iomux_set_pad(MX53_PIN_ATA_DATA9, 306 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 307 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 308 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 309 mxc_iomux_set_pad(MX53_PIN_ATA_DATA10, 310 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 311 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 312 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 313 mxc_iomux_set_pad(MX53_PIN_ATA_DATA11, 314 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 315 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 316 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 317 mxc_iomux_set_pad(MX53_PIN_ATA_DATA0, 318 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 319 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 320 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 321 mxc_iomux_set_pad(MX53_PIN_ATA_DATA1, 322 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 323 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 324 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 325 mxc_iomux_set_pad(MX53_PIN_ATA_DATA2, 326 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 327 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 328 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 329 mxc_iomux_set_pad(MX53_PIN_ATA_DATA3, 330 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 331 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 332 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 333 334 break; 335 default: 336 printf("Warning: you configured more ESDHC controller" 337 "(%d) as supported by the board(2)\n", 338 CONFIG_SYS_FSL_ESDHC_NUM); 339 return status; 340 } 341 status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]); 342 } 343 344 return status; 345 } 346 #endif 347 348 int board_early_init_f(void) 349 { 350 setup_iomux_uart(); 351 setup_iomux_fec(); 352 353 return 0; 354 } 355 356 int board_init(void) 357 { 358 /* address of boot parameters */ 359 gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; 360 361 return 0; 362 } 363 364 int board_late_init(void) 365 { 366 setup_i2c(1); 367 power_init(); 368 369 return 0; 370 } 371 372 int checkboard(void) 373 { 374 puts("Board: MX53EVK\n"); 375 376 return 0; 377 } 378