1 /* 2 * (C) Copyright 2010 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 #include <common.h> 24 #include <asm/io.h> 25 #include <asm/arch/imx-regs.h> 26 #include <asm/arch/mx5x_pins.h> 27 #include <asm/arch/sys_proto.h> 28 #include <asm/arch/crm_regs.h> 29 #include <asm/arch/iomux.h> 30 #include <asm/errno.h> 31 #include <asm/imx-common/boot_mode.h> 32 #include <netdev.h> 33 #include <i2c.h> 34 #include <mmc.h> 35 #include <fsl_esdhc.h> 36 #include <pmic.h> 37 #include <fsl_pmic.h> 38 #include <asm/gpio.h> 39 #include <mc13892.h> 40 41 DECLARE_GLOBAL_DATA_PTR; 42 43 int dram_init(void) 44 { 45 /* dram_init must store complete ramsize in gd->ram_size */ 46 gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, 47 PHYS_SDRAM_1_SIZE); 48 return 0; 49 } 50 51 static void setup_iomux_uart(void) 52 { 53 /* UART1 RXD */ 54 mxc_request_iomux(MX53_PIN_CSI0_D11, IOMUX_CONFIG_ALT2); 55 mxc_iomux_set_pad(MX53_PIN_CSI0_D11, 56 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 57 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 58 PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU | 59 PAD_CTL_ODE_OPENDRAIN_ENABLE); 60 mxc_iomux_set_input(MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, 0x1); 61 62 /* UART1 TXD */ 63 mxc_request_iomux(MX53_PIN_CSI0_D10, IOMUX_CONFIG_ALT2); 64 mxc_iomux_set_pad(MX53_PIN_CSI0_D10, 65 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 66 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 67 PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU | 68 PAD_CTL_ODE_OPENDRAIN_ENABLE); 69 } 70 71 static void setup_i2c(unsigned int port_number) 72 { 73 switch (port_number) { 74 case 0: 75 /* i2c1 SDA */ 76 mxc_request_iomux(MX53_PIN_CSI0_D8, 77 IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION); 78 mxc_iomux_set_input(MX53_I2C1_IPP_SDA_IN_SELECT_INPUT, 79 INPUT_CTL_PATH0); 80 mxc_iomux_set_pad(MX53_PIN_CSI0_D8, 81 PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | 82 PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE | 83 PAD_CTL_ODE_OPENDRAIN_ENABLE); 84 /* i2c1 SCL */ 85 mxc_request_iomux(MX53_PIN_CSI0_D9, 86 IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION); 87 mxc_iomux_set_input(MX53_I2C1_IPP_SCL_IN_SELECT_INPUT, 88 INPUT_CTL_PATH0); 89 mxc_iomux_set_pad(MX53_PIN_CSI0_D9, 90 PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | 91 PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE | 92 PAD_CTL_ODE_OPENDRAIN_ENABLE); 93 break; 94 case 1: 95 /* i2c2 SDA */ 96 mxc_request_iomux(MX53_PIN_KEY_ROW3, 97 IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION); 98 mxc_iomux_set_input(MX53_I2C2_IPP_SDA_IN_SELECT_INPUT, 99 INPUT_CTL_PATH0); 100 mxc_iomux_set_pad(MX53_PIN_KEY_ROW3, 101 PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | 102 PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE | 103 PAD_CTL_ODE_OPENDRAIN_ENABLE); 104 105 /* i2c2 SCL */ 106 mxc_request_iomux(MX53_PIN_KEY_COL3, 107 IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION); 108 mxc_iomux_set_input(MX53_I2C2_IPP_SCL_IN_SELECT_INPUT, 109 INPUT_CTL_PATH0); 110 mxc_iomux_set_pad(MX53_PIN_KEY_COL3, 111 PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | 112 PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE | 113 PAD_CTL_ODE_OPENDRAIN_ENABLE); 114 break; 115 default: 116 printf("Warning: Wrong I2C port number\n"); 117 break; 118 } 119 } 120 121 void power_init(void) 122 { 123 unsigned int val; 124 struct pmic *p; 125 126 pmic_init(); 127 p = get_pmic(); 128 129 /* Set VDDA to 1.25V */ 130 pmic_reg_read(p, REG_SW_2, &val); 131 val &= ~SWX_OUT_MASK; 132 val |= SWX_OUT_1_25; 133 pmic_reg_write(p, REG_SW_2, val); 134 135 /* 136 * Need increase VCC and VDDA to 1.3V 137 * according to MX53 IC TO2 datasheet. 138 */ 139 if (is_soc_rev(CHIP_REV_2_0) == 0) { 140 /* Set VCC to 1.3V for TO2 */ 141 pmic_reg_read(p, REG_SW_1, &val); 142 val &= ~SWX_OUT_MASK; 143 val |= SWX_OUT_1_30; 144 pmic_reg_write(p, REG_SW_1, val); 145 146 /* Set VDDA to 1.3V for TO2 */ 147 pmic_reg_read(p, REG_SW_2, &val); 148 val &= ~SWX_OUT_MASK; 149 val |= SWX_OUT_1_30; 150 pmic_reg_write(p, REG_SW_2, val); 151 } 152 } 153 154 static void setup_iomux_fec(void) 155 { 156 /*FEC_MDIO*/ 157 mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0); 158 mxc_iomux_set_pad(MX53_PIN_FEC_MDIO, 159 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 160 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 161 PAD_CTL_22K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE); 162 mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1); 163 164 /*FEC_MDC*/ 165 mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0); 166 mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH); 167 168 /* FEC RXD1 */ 169 mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0); 170 mxc_iomux_set_pad(MX53_PIN_FEC_RXD1, 171 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); 172 173 /* FEC RXD0 */ 174 mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0); 175 mxc_iomux_set_pad(MX53_PIN_FEC_RXD0, 176 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); 177 178 /* FEC TXD1 */ 179 mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0); 180 mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH); 181 182 /* FEC TXD0 */ 183 mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0); 184 mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH); 185 186 /* FEC TX_EN */ 187 mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0); 188 mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH); 189 190 /* FEC TX_CLK */ 191 mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0); 192 mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK, 193 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); 194 195 /* FEC RX_ER */ 196 mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0); 197 mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER, 198 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); 199 200 /* FEC CRS */ 201 mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0); 202 mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV, 203 PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); 204 } 205 206 #ifdef CONFIG_FSL_ESDHC 207 struct fsl_esdhc_cfg esdhc_cfg[2] = { 208 {MMC_SDHC1_BASE_ADDR, 1}, 209 {MMC_SDHC3_BASE_ADDR, 1}, 210 }; 211 212 int board_mmc_getcd(struct mmc *mmc) 213 { 214 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 215 int ret; 216 217 mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1); 218 gpio_direction_input(75); 219 mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1); 220 gpio_direction_input(77); 221 222 if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) 223 ret = !gpio_get_value(77); /* GPIO3_13 */ 224 else 225 ret = !gpio_get_value(75); /* GPIO3_11 */ 226 227 return ret; 228 } 229 230 int board_mmc_init(bd_t *bis) 231 { 232 u32 index; 233 s32 status = 0; 234 235 for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { 236 switch (index) { 237 case 0: 238 mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0); 239 mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0); 240 mxc_request_iomux(MX53_PIN_SD1_DATA0, 241 IOMUX_CONFIG_ALT0); 242 mxc_request_iomux(MX53_PIN_SD1_DATA1, 243 IOMUX_CONFIG_ALT0); 244 mxc_request_iomux(MX53_PIN_SD1_DATA2, 245 IOMUX_CONFIG_ALT0); 246 mxc_request_iomux(MX53_PIN_SD1_DATA3, 247 IOMUX_CONFIG_ALT0); 248 mxc_request_iomux(MX53_PIN_EIM_DA13, 249 IOMUX_CONFIG_ALT1); 250 251 mxc_iomux_set_pad(MX53_PIN_SD1_CMD, 252 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 253 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 254 PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU); 255 mxc_iomux_set_pad(MX53_PIN_SD1_CLK, 256 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 257 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | 258 PAD_CTL_DRV_HIGH); 259 mxc_iomux_set_pad(MX53_PIN_SD1_DATA0, 260 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 261 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 262 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 263 mxc_iomux_set_pad(MX53_PIN_SD1_DATA1, 264 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 265 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 266 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 267 mxc_iomux_set_pad(MX53_PIN_SD1_DATA2, 268 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 269 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 270 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 271 mxc_iomux_set_pad(MX53_PIN_SD1_DATA3, 272 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 273 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 274 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 275 break; 276 case 1: 277 mxc_request_iomux(MX53_PIN_ATA_RESET_B, 278 IOMUX_CONFIG_ALT2); 279 mxc_request_iomux(MX53_PIN_ATA_IORDY, 280 IOMUX_CONFIG_ALT2); 281 mxc_request_iomux(MX53_PIN_ATA_DATA8, 282 IOMUX_CONFIG_ALT4); 283 mxc_request_iomux(MX53_PIN_ATA_DATA9, 284 IOMUX_CONFIG_ALT4); 285 mxc_request_iomux(MX53_PIN_ATA_DATA10, 286 IOMUX_CONFIG_ALT4); 287 mxc_request_iomux(MX53_PIN_ATA_DATA11, 288 IOMUX_CONFIG_ALT4); 289 mxc_request_iomux(MX53_PIN_ATA_DATA0, 290 IOMUX_CONFIG_ALT4); 291 mxc_request_iomux(MX53_PIN_ATA_DATA1, 292 IOMUX_CONFIG_ALT4); 293 mxc_request_iomux(MX53_PIN_ATA_DATA2, 294 IOMUX_CONFIG_ALT4); 295 mxc_request_iomux(MX53_PIN_ATA_DATA3, 296 IOMUX_CONFIG_ALT4); 297 mxc_request_iomux(MX53_PIN_EIM_DA11, 298 IOMUX_CONFIG_ALT1); 299 300 mxc_iomux_set_pad(MX53_PIN_ATA_RESET_B, 301 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 302 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 303 PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU); 304 mxc_iomux_set_pad(MX53_PIN_ATA_IORDY, 305 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 306 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | 307 PAD_CTL_DRV_HIGH); 308 mxc_iomux_set_pad(MX53_PIN_ATA_DATA8, 309 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 310 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 311 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 312 mxc_iomux_set_pad(MX53_PIN_ATA_DATA9, 313 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 314 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 315 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 316 mxc_iomux_set_pad(MX53_PIN_ATA_DATA10, 317 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 318 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 319 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 320 mxc_iomux_set_pad(MX53_PIN_ATA_DATA11, 321 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 322 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 323 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 324 mxc_iomux_set_pad(MX53_PIN_ATA_DATA0, 325 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 326 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 327 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 328 mxc_iomux_set_pad(MX53_PIN_ATA_DATA1, 329 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 330 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 331 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 332 mxc_iomux_set_pad(MX53_PIN_ATA_DATA2, 333 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 334 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 335 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 336 mxc_iomux_set_pad(MX53_PIN_ATA_DATA3, 337 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | 338 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | 339 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); 340 341 break; 342 default: 343 printf("Warning: you configured more ESDHC controller" 344 "(%d) as supported by the board(2)\n", 345 CONFIG_SYS_FSL_ESDHC_NUM); 346 return status; 347 } 348 status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]); 349 } 350 351 return status; 352 } 353 #endif 354 355 int board_early_init_f(void) 356 { 357 setup_iomux_uart(); 358 setup_iomux_fec(); 359 360 return 0; 361 } 362 363 int board_init(void) 364 { 365 /* address of boot parameters */ 366 gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; 367 368 return 0; 369 } 370 371 #ifdef CONFIG_CMD_BMODE 372 static const struct boot_mode board_boot_modes[] = { 373 /* 4 bit bus width */ 374 {"mmc0", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x12)}, 375 {"mmc1", MAKE_CFGVAL(0x40, 0x20, 0x08, 0x12)}, 376 {NULL, 0}, 377 }; 378 #endif 379 380 int board_late_init(void) 381 { 382 setup_i2c(1); 383 power_init(); 384 385 #ifdef CONFIG_CMD_BMODE 386 add_board_boot_modes(board_boot_modes); 387 #endif 388 return 0; 389 } 390 391 int checkboard(void) 392 { 393 puts("Board: MX53EVK\n"); 394 395 return 0; 396 } 397