1 /* 2 * (C) Copyright 2011 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <asm/io.h> 9 #include <asm/arch/imx-regs.h> 10 #include <asm/arch/sys_proto.h> 11 #include <asm/arch/crm_regs.h> 12 #include <asm/arch/clock.h> 13 #include <asm/arch/iomux-mx53.h> 14 #include <asm/errno.h> 15 #include <netdev.h> 16 #include <mmc.h> 17 #include <fsl_esdhc.h> 18 #include <asm/gpio.h> 19 20 #define ETHERNET_INT IMX_GPIO_NR(2, 31) 21 22 DECLARE_GLOBAL_DATA_PTR; 23 24 int dram_init(void) 25 { 26 u32 size1, size2; 27 28 size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); 29 size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); 30 31 gd->ram_size = size1 + size2; 32 33 return 0; 34 } 35 void dram_init_banksize(void) 36 { 37 gd->bd->bi_dram[0].start = PHYS_SDRAM_1; 38 gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; 39 40 gd->bd->bi_dram[1].start = PHYS_SDRAM_2; 41 gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; 42 } 43 44 #ifdef CONFIG_NAND_MXC 45 static void setup_iomux_nand(void) 46 { 47 static const iomux_v3_cfg_t nand_pads[] = { 48 NEW_PAD_CTRL(MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0, 49 PAD_CTL_DSE_HIGH), 50 NEW_PAD_CTRL(MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1, 51 PAD_CTL_DSE_HIGH), 52 NEW_PAD_CTRL(MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0, 53 PAD_CTL_PUS_100K_UP), 54 NEW_PAD_CTRL(MX53_PAD_NANDF_CLE__EMI_NANDF_CLE, 55 PAD_CTL_DSE_HIGH), 56 NEW_PAD_CTRL(MX53_PAD_NANDF_ALE__EMI_NANDF_ALE, 57 PAD_CTL_DSE_HIGH), 58 NEW_PAD_CTRL(MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B, 59 PAD_CTL_PUS_100K_UP), 60 NEW_PAD_CTRL(MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B, 61 PAD_CTL_DSE_HIGH), 62 NEW_PAD_CTRL(MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B, 63 PAD_CTL_DSE_HIGH), 64 NEW_PAD_CTRL(MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0, 65 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 66 NEW_PAD_CTRL(MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1, 67 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 68 NEW_PAD_CTRL(MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2, 69 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 70 NEW_PAD_CTRL(MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3, 71 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 72 NEW_PAD_CTRL(MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4, 73 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 74 NEW_PAD_CTRL(MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5, 75 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 76 NEW_PAD_CTRL(MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6, 77 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 78 NEW_PAD_CTRL(MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7, 79 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 80 }; 81 82 u32 i, reg; 83 84 reg = __raw_readl(M4IF_BASE_ADDR + 0xc); 85 reg &= ~M4IF_GENP_WEIM_MM_MASK; 86 __raw_writel(reg, M4IF_BASE_ADDR + 0xc); 87 for (i = 0x4; i < 0x94; i += 0x18) { 88 reg = __raw_readl(WEIM_BASE_ADDR + i); 89 reg &= ~WEIM_GCR2_MUX16_BYP_GRANT_MASK; 90 __raw_writel(reg, WEIM_BASE_ADDR + i); 91 } 92 93 imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads)); 94 } 95 #else 96 static void setup_iomux_nand(void) 97 { 98 } 99 #endif 100 101 #define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ 102 PAD_CTL_PUS_100K_UP | PAD_CTL_ODE) 103 104 static void setup_iomux_uart(void) 105 { 106 static const iomux_v3_cfg_t uart_pads[] = { 107 NEW_PAD_CTRL(MX53_PAD_PATA_DMACK__UART1_RXD_MUX, UART_PAD_CTRL), 108 NEW_PAD_CTRL(MX53_PAD_PATA_DIOW__UART1_TXD_MUX, UART_PAD_CTRL), 109 }; 110 111 imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); 112 } 113 114 #ifdef CONFIG_FSL_ESDHC 115 struct fsl_esdhc_cfg esdhc_cfg[2] = { 116 {MMC_SDHC1_BASE_ADDR}, 117 {MMC_SDHC2_BASE_ADDR}, 118 }; 119 120 int board_mmc_getcd(struct mmc *mmc) 121 { 122 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 123 int ret; 124 125 imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1); 126 gpio_direction_input(IMX_GPIO_NR(1, 1)); 127 imx_iomux_v3_setup_pad(MX53_PAD_GPIO_4__GPIO1_4); 128 gpio_direction_input(IMX_GPIO_NR(1, 4)); 129 130 if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) 131 ret = !gpio_get_value(IMX_GPIO_NR(1, 1)); 132 else 133 ret = !gpio_get_value(IMX_GPIO_NR(1, 4)); 134 135 return ret; 136 } 137 138 #define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ 139 PAD_CTL_PUS_100K_UP) 140 #define SD_CLK_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH) 141 #define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \ 142 PAD_CTL_DSE_HIGH) 143 144 int board_mmc_init(bd_t *bis) 145 { 146 static const iomux_v3_cfg_t sd1_pads[] = { 147 NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL), 148 NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_CLK_PAD_CTRL), 149 NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL), 150 NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL), 151 NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL), 152 NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL), 153 }; 154 155 static const iomux_v3_cfg_t sd2_pads[] = { 156 NEW_PAD_CTRL(MX53_PAD_SD2_CMD__ESDHC2_CMD, SD_CMD_PAD_CTRL), 157 NEW_PAD_CTRL(MX53_PAD_SD2_CLK__ESDHC2_CLK, SD_CLK_PAD_CTRL), 158 NEW_PAD_CTRL(MX53_PAD_SD2_DATA0__ESDHC2_DAT0, SD_PAD_CTRL), 159 NEW_PAD_CTRL(MX53_PAD_SD2_DATA1__ESDHC2_DAT1, SD_PAD_CTRL), 160 NEW_PAD_CTRL(MX53_PAD_SD2_DATA2__ESDHC2_DAT2, SD_PAD_CTRL), 161 NEW_PAD_CTRL(MX53_PAD_SD2_DATA3__ESDHC2_DAT3, SD_PAD_CTRL), 162 NEW_PAD_CTRL(MX53_PAD_PATA_DATA12__ESDHC2_DAT4, SD_PAD_CTRL), 163 NEW_PAD_CTRL(MX53_PAD_PATA_DATA13__ESDHC2_DAT5, SD_PAD_CTRL), 164 NEW_PAD_CTRL(MX53_PAD_PATA_DATA14__ESDHC2_DAT6, SD_PAD_CTRL), 165 NEW_PAD_CTRL(MX53_PAD_PATA_DATA15__ESDHC2_DAT7, SD_PAD_CTRL), 166 }; 167 168 u32 index; 169 s32 status = 0; 170 171 esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); 172 esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); 173 174 for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { 175 switch (index) { 176 case 0: 177 imx_iomux_v3_setup_multiple_pads(sd1_pads, 178 ARRAY_SIZE(sd1_pads)); 179 break; 180 case 1: 181 imx_iomux_v3_setup_multiple_pads(sd2_pads, 182 ARRAY_SIZE(sd2_pads)); 183 break; 184 default: 185 printf("Warning: you configured more ESDHC controller" 186 "(%d) as supported by the board(2)\n", 187 CONFIG_SYS_FSL_ESDHC_NUM); 188 return status; 189 } 190 status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]); 191 } 192 193 return status; 194 } 195 #endif 196 197 static void weim_smc911x_iomux(void) 198 { 199 static const iomux_v3_cfg_t weim_smc911x_pads[] = { 200 /* Data bus */ 201 NEW_PAD_CTRL(MX53_PAD_EIM_D16__EMI_WEIM_D_16, 202 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 203 NEW_PAD_CTRL(MX53_PAD_EIM_D17__EMI_WEIM_D_17, 204 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 205 NEW_PAD_CTRL(MX53_PAD_EIM_D18__EMI_WEIM_D_18, 206 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 207 NEW_PAD_CTRL(MX53_PAD_EIM_D19__EMI_WEIM_D_19, 208 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 209 NEW_PAD_CTRL(MX53_PAD_EIM_D20__EMI_WEIM_D_20, 210 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 211 NEW_PAD_CTRL(MX53_PAD_EIM_D21__EMI_WEIM_D_21, 212 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 213 NEW_PAD_CTRL(MX53_PAD_EIM_D22__EMI_WEIM_D_22, 214 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 215 NEW_PAD_CTRL(MX53_PAD_EIM_D23__EMI_WEIM_D_23, 216 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 217 NEW_PAD_CTRL(MX53_PAD_EIM_D24__EMI_WEIM_D_24, 218 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 219 NEW_PAD_CTRL(MX53_PAD_EIM_D25__EMI_WEIM_D_25, 220 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 221 NEW_PAD_CTRL(MX53_PAD_EIM_D26__EMI_WEIM_D_26, 222 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 223 NEW_PAD_CTRL(MX53_PAD_EIM_D27__EMI_WEIM_D_27, 224 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 225 NEW_PAD_CTRL(MX53_PAD_EIM_D28__EMI_WEIM_D_28, 226 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 227 NEW_PAD_CTRL(MX53_PAD_EIM_D29__EMI_WEIM_D_29, 228 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 229 NEW_PAD_CTRL(MX53_PAD_EIM_D30__EMI_WEIM_D_30, 230 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 231 NEW_PAD_CTRL(MX53_PAD_EIM_D31__EMI_WEIM_D_31, 232 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 233 234 /* Address lines */ 235 NEW_PAD_CTRL(MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0, 236 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 237 NEW_PAD_CTRL(MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1, 238 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 239 NEW_PAD_CTRL(MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2, 240 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 241 NEW_PAD_CTRL(MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3, 242 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 243 NEW_PAD_CTRL(MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4, 244 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 245 NEW_PAD_CTRL(MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5, 246 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 247 NEW_PAD_CTRL(MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6, 248 PAD_CTL_PKE | PAD_CTL_DSE_HIGH), 249 250 /* other EIM signals for ethernet */ 251 MX53_PAD_EIM_OE__EMI_WEIM_OE, 252 MX53_PAD_EIM_RW__EMI_WEIM_RW, 253 MX53_PAD_EIM_CS1__EMI_WEIM_CS_1, 254 }; 255 256 /* ETHERNET_INT as GPIO2_31 */ 257 imx_iomux_v3_setup_pad(MX53_PAD_EIM_EB3__GPIO2_31); 258 gpio_direction_input(ETHERNET_INT); 259 260 /* WEIM bus */ 261 imx_iomux_v3_setup_multiple_pads(weim_smc911x_pads, 262 ARRAY_SIZE(weim_smc911x_pads)); 263 } 264 265 static void weim_cs1_settings(void) 266 { 267 struct weim *weim_regs = (struct weim *)WEIM_BASE_ADDR; 268 269 writel(MX53ARD_CS1GCR1, &weim_regs->cs1gcr1); 270 writel(0x0, &weim_regs->cs1gcr2); 271 writel(MX53ARD_CS1RCR1, &weim_regs->cs1rcr1); 272 writel(MX53ARD_CS1RCR2, &weim_regs->cs1rcr2); 273 writel(MX53ARD_CS1WCR1, &weim_regs->cs1wcr1); 274 writel(0x0, &weim_regs->cs1wcr2); 275 writel(0x0, &weim_regs->wcr); 276 277 set_chipselect_size(CS0_64M_CS1_64M); 278 } 279 280 int board_early_init_f(void) 281 { 282 setup_iomux_nand(); 283 setup_iomux_uart(); 284 return 0; 285 } 286 287 int board_init(void) 288 { 289 /* address of boot parameters */ 290 gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; 291 292 return 0; 293 } 294 295 int board_eth_init(bd_t *bis) 296 { 297 int rc = -ENODEV; 298 299 weim_smc911x_iomux(); 300 weim_cs1_settings(); 301 302 #ifdef CONFIG_SMC911X 303 rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); 304 #endif 305 return rc; 306 } 307 308 int checkboard(void) 309 { 310 puts("Board: MX53ARD\n"); 311 312 return 0; 313 } 314