1 /* 2 * (C) Copyright 2009 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 #include <common.h> 24 #include <asm/io.h> 25 #include <asm/gpio.h> 26 #include <asm/arch/imx-regs.h> 27 #include <asm/arch/mx5x_pins.h> 28 #include <asm/arch/iomux.h> 29 #include <asm/errno.h> 30 #include <asm/arch/sys_proto.h> 31 #include <asm/arch/crm_regs.h> 32 #include <i2c.h> 33 #include <mmc.h> 34 #include <fsl_esdhc.h> 35 #include <pmic.h> 36 #include <fsl_pmic.h> 37 #include <mc13892.h> 38 #include <usb/ehci-fsl.h> 39 40 DECLARE_GLOBAL_DATA_PTR; 41 42 #ifdef CONFIG_FSL_ESDHC 43 struct fsl_esdhc_cfg esdhc_cfg[2] = { 44 {MMC_SDHC1_BASE_ADDR, 1}, 45 {MMC_SDHC2_BASE_ADDR, 1}, 46 }; 47 #endif 48 49 int dram_init(void) 50 { 51 /* dram_init must store complete ramsize in gd->ram_size */ 52 gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, 53 PHYS_SDRAM_1_SIZE); 54 return 0; 55 } 56 57 static void setup_iomux_uart(void) 58 { 59 unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE | 60 PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH; 61 62 mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0); 63 mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad | PAD_CTL_SRE_FAST); 64 mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0); 65 mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad | PAD_CTL_SRE_FAST); 66 mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0); 67 mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad); 68 mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0); 69 mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad); 70 } 71 72 static void setup_iomux_fec(void) 73 { 74 /*FEC_MDIO*/ 75 mxc_request_iomux(MX51_PIN_EIM_EB2 , IOMUX_CONFIG_ALT3); 76 mxc_iomux_set_pad(MX51_PIN_EIM_EB2 , 0x1FD); 77 78 /*FEC_MDC*/ 79 mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT2); 80 mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, 0x2004); 81 82 /* FEC RDATA[3] */ 83 mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3); 84 mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180); 85 86 /* FEC RDATA[2] */ 87 mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3); 88 mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180); 89 90 /* FEC RDATA[1] */ 91 mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3); 92 mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180); 93 94 /* FEC RDATA[0] */ 95 mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2); 96 mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180); 97 98 /* FEC TDATA[3] */ 99 mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT2); 100 mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, 0x2004); 101 102 /* FEC TDATA[2] */ 103 mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT2); 104 mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, 0x2004); 105 106 /* FEC TDATA[1] */ 107 mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT2); 108 mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, 0x2004); 109 110 /* FEC TDATA[0] */ 111 mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT2); 112 mxc_iomux_set_pad(MX51_PIN_NANDF_D8, 0x2004); 113 114 /* FEC TX_EN */ 115 mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT1); 116 mxc_iomux_set_pad(MX51_PIN_NANDF_CS7, 0x2004); 117 118 /* FEC TX_ER */ 119 mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT2); 120 mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, 0x2004); 121 122 /* FEC TX_CLK */ 123 mxc_request_iomux(MX51_PIN_NANDF_RDY_INT, IOMUX_CONFIG_ALT1); 124 mxc_iomux_set_pad(MX51_PIN_NANDF_RDY_INT, 0x2180); 125 126 /* FEC TX_COL */ 127 mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1); 128 mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180); 129 130 /* FEC RX_CLK */ 131 mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1); 132 mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180); 133 134 /* FEC RX_CRS */ 135 mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT3); 136 mxc_iomux_set_pad(MX51_PIN_EIM_CS5, 0x180); 137 138 /* FEC RX_ER */ 139 mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3); 140 mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180); 141 142 /* FEC RX_DV */ 143 mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT2); 144 mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180); 145 } 146 147 #ifdef CONFIG_MXC_SPI 148 static void setup_iomux_spi(void) 149 { 150 /* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */ 151 mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0); 152 mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI, 0x105); 153 154 /* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */ 155 mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0); 156 mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO, 0x105); 157 158 /* de-select SS1 of instance: ecspi1. */ 159 mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3); 160 mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1, 0x85); 161 162 /* 000: Select mux mode: ALT0 mux port: SS0 ecspi1 */ 163 mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0); 164 mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0, 0x185); 165 166 /* 000: Select mux mode: ALT0 mux port: RDY of instance: ecspi1. */ 167 mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0); 168 mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x180); 169 170 /* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */ 171 mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0); 172 mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK, 0x105); 173 } 174 #endif 175 176 #ifdef CONFIG_USB_EHCI_MX5 177 #define MX51EVK_USBH1_HUB_RST IOMUX_TO_GPIO(MX51_PIN_GPIO1_7) /* GPIO1_7 */ 178 #define MX51EVK_USBH1_STP IOMUX_TO_GPIO(MX51_PIN_USBH1_STP) /* GPIO1_27 */ 179 #define MX51EVK_USB_CLK_EN_B IOMUX_TO_GPIO(MX51_PIN_EIM_D18) /* GPIO2_1 */ 180 #define MX51EVK_USB_PHY_RESET IOMUX_TO_GPIO(MX51_PIN_EIM_D21) /* GPIO2_5 */ 181 182 #define USBH1_PAD (PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | \ 183 PAD_CTL_100K_PU | PAD_CTL_PUE_PULL | \ 184 PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE) 185 #define GPIO_PAD (PAD_CTL_DRV_HIGH | PAD_CTL_PKE_ENABLE | \ 186 PAD_CTL_SRE_FAST) 187 #define NO_PAD (1 << 16) 188 189 static void setup_usb_h1(void) 190 { 191 setup_iomux_usb_h1(); 192 193 /* GPIO_1_7 for USBH1 hub reset */ 194 mxc_request_iomux(MX51_PIN_GPIO1_7, IOMUX_CONFIG_ALT0); 195 mxc_iomux_set_pad(MX51_PIN_GPIO1_7, NO_PAD); 196 197 /* GPIO_2_1 */ 198 mxc_request_iomux(MX51_PIN_EIM_D17, IOMUX_CONFIG_ALT1); 199 mxc_iomux_set_pad(MX51_PIN_EIM_D17, GPIO_PAD); 200 201 /* GPIO_2_5 for USB PHY reset */ 202 mxc_request_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT1); 203 mxc_iomux_set_pad(MX51_PIN_EIM_D21, GPIO_PAD); 204 } 205 206 int board_ehci_hcd_init(int port) 207 { 208 /* Set USBH1_STP to GPIO and toggle it */ 209 mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_GPIO); 210 mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USBH1_PAD); 211 212 gpio_direction_output(MX51EVK_USBH1_STP, 0); 213 gpio_direction_output(MX51EVK_USB_PHY_RESET, 0); 214 mdelay(10); 215 gpio_set_value(MX51EVK_USBH1_STP, 1); 216 217 /* Set back USBH1_STP to be function */ 218 mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_ALT0); 219 mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USBH1_PAD); 220 221 /* De-assert USB PHY RESETB */ 222 gpio_set_value(MX51EVK_USB_PHY_RESET, 1); 223 224 /* Drive USB_CLK_EN_B line low */ 225 gpio_direction_output(MX51EVK_USB_CLK_EN_B, 0); 226 227 /* Reset USB hub */ 228 gpio_direction_output(MX51EVK_USBH1_HUB_RST, 0); 229 mdelay(2); 230 gpio_set_value(MX51EVK_USBH1_HUB_RST, 1); 231 return 0; 232 } 233 #endif 234 235 static void power_init(void) 236 { 237 unsigned int val; 238 struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE; 239 struct pmic *p; 240 241 pmic_init(); 242 p = get_pmic(); 243 244 /* Write needed to Power Gate 2 register */ 245 pmic_reg_read(p, REG_POWER_MISC, &val); 246 val &= ~PWGT2SPIEN; 247 pmic_reg_write(p, REG_POWER_MISC, val); 248 249 /* Externally powered */ 250 pmic_reg_read(p, REG_CHARGE, &val); 251 val |= ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | CHGAUTOB; 252 pmic_reg_write(p, REG_CHARGE, val); 253 254 /* power up the system first */ 255 pmic_reg_write(p, REG_POWER_MISC, PWUP); 256 257 /* Set core voltage to 1.1V */ 258 pmic_reg_read(p, REG_SW_0, &val); 259 val = (val & ~SWx_VOLT_MASK) | SWx_1_100V; 260 pmic_reg_write(p, REG_SW_0, val); 261 262 /* Setup VCC (SW2) to 1.25 */ 263 pmic_reg_read(p, REG_SW_1, &val); 264 val = (val & ~SWx_VOLT_MASK) | SWx_1_250V; 265 pmic_reg_write(p, REG_SW_1, val); 266 267 /* Setup 1V2_DIG1 (SW3) to 1.25 */ 268 pmic_reg_read(p, REG_SW_2, &val); 269 val = (val & ~SWx_VOLT_MASK) | SWx_1_250V; 270 pmic_reg_write(p, REG_SW_2, val); 271 udelay(50); 272 273 /* Raise the core frequency to 800MHz */ 274 writel(0x0, &mxc_ccm->cacrr); 275 276 /* Set switchers in Auto in NORMAL mode & STANDBY mode */ 277 /* Setup the switcher mode for SW1 & SW2*/ 278 pmic_reg_read(p, REG_SW_4, &val); 279 val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) | 280 (SWMODE_MASK << SWMODE2_SHIFT))); 281 val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) | 282 (SWMODE_AUTO_AUTO << SWMODE2_SHIFT); 283 pmic_reg_write(p, REG_SW_4, val); 284 285 /* Setup the switcher mode for SW3 & SW4 */ 286 pmic_reg_read(p, REG_SW_5, &val); 287 val = (val & ~((SWMODE_MASK << SWMODE3_SHIFT) | 288 (SWMODE_MASK << SWMODE4_SHIFT))); 289 val |= (SWMODE_AUTO_AUTO << SWMODE3_SHIFT) | 290 (SWMODE_AUTO_AUTO << SWMODE4_SHIFT); 291 pmic_reg_write(p, REG_SW_5, val); 292 293 /* Set VDIG to 1.65V, VGEN3 to 1.8V, VCAM to 2.6V */ 294 pmic_reg_read(p, REG_SETTING_0, &val); 295 val &= ~(VCAM_MASK | VGEN3_MASK | VDIG_MASK); 296 val |= VDIG_1_65 | VGEN3_1_8 | VCAM_2_6; 297 pmic_reg_write(p, REG_SETTING_0, val); 298 299 /* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */ 300 pmic_reg_read(p, REG_SETTING_1, &val); 301 val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK); 302 val |= VSD_3_15 | VAUDIO_3_0 | VVIDEO_2_775; 303 pmic_reg_write(p, REG_SETTING_1, val); 304 305 /* Configure VGEN3 and VCAM regulators to use external PNP */ 306 val = VGEN3CONFIG | VCAMCONFIG; 307 pmic_reg_write(p, REG_MODE_1, val); 308 udelay(200); 309 310 /* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */ 311 val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG | 312 VVIDEOEN | VAUDIOEN | VSDEN; 313 pmic_reg_write(p, REG_MODE_1, val); 314 315 mxc_request_iomux(MX51_PIN_EIM_A20, IOMUX_CONFIG_ALT1); 316 gpio_direction_output(46, 0); 317 318 udelay(500); 319 320 gpio_set_value(46, 1); 321 } 322 323 #ifdef CONFIG_FSL_ESDHC 324 int board_mmc_getcd(struct mmc *mmc) 325 { 326 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 327 int ret; 328 329 mxc_request_iomux(MX51_PIN_GPIO1_0, IOMUX_CONFIG_ALT1); 330 mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0); 331 332 if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) 333 ret = !gpio_get_value(0); 334 else 335 ret = !gpio_get_value(6); 336 337 return ret; 338 } 339 340 int board_mmc_init(bd_t *bis) 341 { 342 u32 index; 343 s32 status = 0; 344 345 for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; 346 index++) { 347 switch (index) { 348 case 0: 349 mxc_request_iomux(MX51_PIN_SD1_CMD, 350 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 351 mxc_request_iomux(MX51_PIN_SD1_CLK, 352 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 353 mxc_request_iomux(MX51_PIN_SD1_DATA0, 354 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 355 mxc_request_iomux(MX51_PIN_SD1_DATA1, 356 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 357 mxc_request_iomux(MX51_PIN_SD1_DATA2, 358 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 359 mxc_request_iomux(MX51_PIN_SD1_DATA3, 360 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 361 mxc_iomux_set_pad(MX51_PIN_SD1_CMD, 362 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | 363 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | 364 PAD_CTL_PUE_PULL | 365 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); 366 mxc_iomux_set_pad(MX51_PIN_SD1_CLK, 367 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | 368 PAD_CTL_HYS_NONE | PAD_CTL_47K_PU | 369 PAD_CTL_PUE_PULL | 370 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); 371 mxc_iomux_set_pad(MX51_PIN_SD1_DATA0, 372 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | 373 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | 374 PAD_CTL_PUE_PULL | 375 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); 376 mxc_iomux_set_pad(MX51_PIN_SD1_DATA1, 377 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | 378 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | 379 PAD_CTL_PUE_PULL | 380 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); 381 mxc_iomux_set_pad(MX51_PIN_SD1_DATA2, 382 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | 383 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | 384 PAD_CTL_PUE_PULL | 385 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); 386 mxc_iomux_set_pad(MX51_PIN_SD1_DATA3, 387 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | 388 PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD | 389 PAD_CTL_PUE_PULL | 390 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); 391 mxc_request_iomux(MX51_PIN_GPIO1_0, 392 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 393 mxc_iomux_set_pad(MX51_PIN_GPIO1_0, 394 PAD_CTL_HYS_ENABLE); 395 mxc_request_iomux(MX51_PIN_GPIO1_1, 396 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 397 mxc_iomux_set_pad(MX51_PIN_GPIO1_1, 398 PAD_CTL_HYS_ENABLE); 399 break; 400 case 1: 401 mxc_request_iomux(MX51_PIN_SD2_CMD, 402 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 403 mxc_request_iomux(MX51_PIN_SD2_CLK, 404 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 405 mxc_request_iomux(MX51_PIN_SD2_DATA0, 406 IOMUX_CONFIG_ALT0); 407 mxc_request_iomux(MX51_PIN_SD2_DATA1, 408 IOMUX_CONFIG_ALT0); 409 mxc_request_iomux(MX51_PIN_SD2_DATA2, 410 IOMUX_CONFIG_ALT0); 411 mxc_request_iomux(MX51_PIN_SD2_DATA3, 412 IOMUX_CONFIG_ALT0); 413 mxc_iomux_set_pad(MX51_PIN_SD2_CMD, 414 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | 415 PAD_CTL_SRE_FAST); 416 mxc_iomux_set_pad(MX51_PIN_SD2_CLK, 417 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | 418 PAD_CTL_SRE_FAST); 419 mxc_iomux_set_pad(MX51_PIN_SD2_DATA0, 420 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | 421 PAD_CTL_SRE_FAST); 422 mxc_iomux_set_pad(MX51_PIN_SD2_DATA1, 423 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | 424 PAD_CTL_SRE_FAST); 425 mxc_iomux_set_pad(MX51_PIN_SD2_DATA2, 426 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | 427 PAD_CTL_SRE_FAST); 428 mxc_iomux_set_pad(MX51_PIN_SD2_DATA3, 429 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | 430 PAD_CTL_SRE_FAST); 431 mxc_request_iomux(MX51_PIN_SD2_CMD, 432 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 433 mxc_request_iomux(MX51_PIN_GPIO1_6, 434 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 435 mxc_iomux_set_pad(MX51_PIN_GPIO1_6, 436 PAD_CTL_HYS_ENABLE); 437 mxc_request_iomux(MX51_PIN_GPIO1_5, 438 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 439 mxc_iomux_set_pad(MX51_PIN_GPIO1_5, 440 PAD_CTL_HYS_ENABLE); 441 break; 442 default: 443 printf("Warning: you configured more ESDHC controller" 444 "(%d) as supported by the board(2)\n", 445 CONFIG_SYS_FSL_ESDHC_NUM); 446 return status; 447 } 448 status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]); 449 } 450 return status; 451 } 452 #endif 453 454 int board_early_init_f(void) 455 { 456 setup_iomux_uart(); 457 setup_iomux_fec(); 458 #ifdef CONFIG_USB_EHCI_MX5 459 setup_usb_h1(); 460 #endif 461 462 return 0; 463 } 464 465 int board_init(void) 466 { 467 /* address of boot parameters */ 468 gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; 469 470 return 0; 471 } 472 473 #ifdef CONFIG_BOARD_LATE_INIT 474 int board_late_init(void) 475 { 476 #ifdef CONFIG_MXC_SPI 477 setup_iomux_spi(); 478 power_init(); 479 #endif 480 return 0; 481 } 482 #endif 483 484 int checkboard(void) 485 { 486 puts("Board: MX51EVK\n"); 487 488 return 0; 489 } 490