1 /* 2 * (C) Copyright 2009 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 #include <common.h> 24 #include <asm/io.h> 25 #include <asm/gpio.h> 26 #include <asm/arch/imx-regs.h> 27 #include <asm/arch/mx5x_pins.h> 28 #include <asm/arch/iomux.h> 29 #include <asm/errno.h> 30 #include <asm/arch/sys_proto.h> 31 #include <asm/arch/crm_regs.h> 32 #include <asm/arch/clock.h> 33 #include <asm/imx-common/mx5_video.h> 34 #include <i2c.h> 35 #include <mmc.h> 36 #include <fsl_esdhc.h> 37 #include <power/pmic.h> 38 #include <fsl_pmic.h> 39 #include <mc13892.h> 40 #include <usb/ehci-fsl.h> 41 42 DECLARE_GLOBAL_DATA_PTR; 43 44 #ifdef CONFIG_FSL_ESDHC 45 struct fsl_esdhc_cfg esdhc_cfg[2] = { 46 {MMC_SDHC1_BASE_ADDR}, 47 {MMC_SDHC2_BASE_ADDR}, 48 }; 49 #endif 50 51 int dram_init(void) 52 { 53 /* dram_init must store complete ramsize in gd->ram_size */ 54 gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, 55 PHYS_SDRAM_1_SIZE); 56 return 0; 57 } 58 59 u32 get_board_rev(void) 60 { 61 u32 rev = get_cpu_rev(); 62 if (!gpio_get_value(IMX_GPIO_NR(1, 22))) 63 rev |= BOARD_REV_2_0 << BOARD_VER_OFFSET; 64 return rev; 65 } 66 67 static void setup_iomux_uart(void) 68 { 69 unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE | 70 PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH; 71 72 mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0); 73 mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad | PAD_CTL_SRE_FAST); 74 mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0); 75 mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad | PAD_CTL_SRE_FAST); 76 mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0); 77 mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad); 78 mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0); 79 mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad); 80 } 81 82 static void setup_iomux_fec(void) 83 { 84 /*FEC_MDIO*/ 85 mxc_request_iomux(MX51_PIN_EIM_EB2 , IOMUX_CONFIG_ALT3); 86 mxc_iomux_set_pad(MX51_PIN_EIM_EB2 , 0x1FD); 87 88 /*FEC_MDC*/ 89 mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT2); 90 mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, 0x2004); 91 92 /* FEC RDATA[3] */ 93 mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3); 94 mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180); 95 96 /* FEC RDATA[2] */ 97 mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3); 98 mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180); 99 100 /* FEC RDATA[1] */ 101 mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3); 102 mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180); 103 104 /* FEC RDATA[0] */ 105 mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2); 106 mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180); 107 108 /* FEC TDATA[3] */ 109 mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT2); 110 mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, 0x2004); 111 112 /* FEC TDATA[2] */ 113 mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT2); 114 mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, 0x2004); 115 116 /* FEC TDATA[1] */ 117 mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT2); 118 mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, 0x2004); 119 120 /* FEC TDATA[0] */ 121 mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT2); 122 mxc_iomux_set_pad(MX51_PIN_NANDF_D8, 0x2004); 123 124 /* FEC TX_EN */ 125 mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT1); 126 mxc_iomux_set_pad(MX51_PIN_NANDF_CS7, 0x2004); 127 128 /* FEC TX_ER */ 129 mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT2); 130 mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, 0x2004); 131 132 /* FEC TX_CLK */ 133 mxc_request_iomux(MX51_PIN_NANDF_RDY_INT, IOMUX_CONFIG_ALT1); 134 mxc_iomux_set_pad(MX51_PIN_NANDF_RDY_INT, 0x2180); 135 136 /* FEC TX_COL */ 137 mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1); 138 mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180); 139 140 /* FEC RX_CLK */ 141 mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1); 142 mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180); 143 144 /* FEC RX_CRS */ 145 mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT3); 146 mxc_iomux_set_pad(MX51_PIN_EIM_CS5, 0x180); 147 148 /* FEC RX_ER */ 149 mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3); 150 mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180); 151 152 /* FEC RX_DV */ 153 mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT2); 154 mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180); 155 } 156 157 #ifdef CONFIG_MXC_SPI 158 static void setup_iomux_spi(void) 159 { 160 /* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */ 161 mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0); 162 mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI, 0x105); 163 164 /* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */ 165 mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0); 166 mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO, 0x105); 167 168 /* de-select SS1 of instance: ecspi1. */ 169 mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3); 170 mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1, 0x85); 171 172 /* 000: Select mux mode: ALT0 mux port: SS0 ecspi1 */ 173 mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0); 174 mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0, 0x185); 175 176 /* 000: Select mux mode: ALT0 mux port: RDY of instance: ecspi1. */ 177 mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0); 178 mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x180); 179 180 /* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */ 181 mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0); 182 mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK, 0x105); 183 } 184 #endif 185 186 #ifdef CONFIG_USB_EHCI_MX5 187 #define MX51EVK_USBH1_HUB_RST IOMUX_TO_GPIO(MX51_PIN_GPIO1_7) /* GPIO1_7 */ 188 #define MX51EVK_USBH1_STP IOMUX_TO_GPIO(MX51_PIN_USBH1_STP) /* GPIO1_27 */ 189 #define MX51EVK_USB_CLK_EN_B IOMUX_TO_GPIO(MX51_PIN_EIM_D18) /* GPIO2_1 */ 190 #define MX51EVK_USB_PHY_RESET IOMUX_TO_GPIO(MX51_PIN_EIM_D21) /* GPIO2_5 */ 191 192 #define USBH1_PAD (PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | \ 193 PAD_CTL_100K_PU | PAD_CTL_PUE_PULL | \ 194 PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE) 195 #define GPIO_PAD (PAD_CTL_DRV_HIGH | PAD_CTL_PKE_ENABLE | \ 196 PAD_CTL_SRE_FAST) 197 #define NO_PAD (1 << 16) 198 199 static void setup_usb_h1(void) 200 { 201 setup_iomux_usb_h1(); 202 203 /* GPIO_1_7 for USBH1 hub reset */ 204 mxc_request_iomux(MX51_PIN_GPIO1_7, IOMUX_CONFIG_ALT0); 205 mxc_iomux_set_pad(MX51_PIN_GPIO1_7, NO_PAD); 206 207 /* GPIO_2_1 */ 208 mxc_request_iomux(MX51_PIN_EIM_D17, IOMUX_CONFIG_ALT1); 209 mxc_iomux_set_pad(MX51_PIN_EIM_D17, GPIO_PAD); 210 211 /* GPIO_2_5 for USB PHY reset */ 212 mxc_request_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT1); 213 mxc_iomux_set_pad(MX51_PIN_EIM_D21, GPIO_PAD); 214 } 215 216 int board_ehci_hcd_init(int port) 217 { 218 /* Set USBH1_STP to GPIO and toggle it */ 219 mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_GPIO); 220 mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USBH1_PAD); 221 222 gpio_direction_output(MX51EVK_USBH1_STP, 0); 223 gpio_direction_output(MX51EVK_USB_PHY_RESET, 0); 224 mdelay(10); 225 gpio_set_value(MX51EVK_USBH1_STP, 1); 226 227 /* Set back USBH1_STP to be function */ 228 mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_ALT0); 229 mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USBH1_PAD); 230 231 /* De-assert USB PHY RESETB */ 232 gpio_set_value(MX51EVK_USB_PHY_RESET, 1); 233 234 /* Drive USB_CLK_EN_B line low */ 235 gpio_direction_output(MX51EVK_USB_CLK_EN_B, 0); 236 237 /* Reset USB hub */ 238 gpio_direction_output(MX51EVK_USBH1_HUB_RST, 0); 239 mdelay(2); 240 gpio_set_value(MX51EVK_USBH1_HUB_RST, 1); 241 return 0; 242 } 243 #endif 244 245 static void power_init(void) 246 { 247 unsigned int val; 248 struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE; 249 struct pmic *p; 250 int ret; 251 252 ret = pmic_init(I2C_PMIC); 253 if (ret) 254 return; 255 256 p = pmic_get("FSL_PMIC"); 257 if (!p) 258 return; 259 260 /* Write needed to Power Gate 2 register */ 261 pmic_reg_read(p, REG_POWER_MISC, &val); 262 val &= ~PWGT2SPIEN; 263 pmic_reg_write(p, REG_POWER_MISC, val); 264 265 /* Externally powered */ 266 pmic_reg_read(p, REG_CHARGE, &val); 267 val |= ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | CHGAUTOB; 268 pmic_reg_write(p, REG_CHARGE, val); 269 270 /* power up the system first */ 271 pmic_reg_write(p, REG_POWER_MISC, PWUP); 272 273 /* Set core voltage to 1.1V */ 274 pmic_reg_read(p, REG_SW_0, &val); 275 val = (val & ~SWx_VOLT_MASK) | SWx_1_100V; 276 pmic_reg_write(p, REG_SW_0, val); 277 278 /* Setup VCC (SW2) to 1.25 */ 279 pmic_reg_read(p, REG_SW_1, &val); 280 val = (val & ~SWx_VOLT_MASK) | SWx_1_250V; 281 pmic_reg_write(p, REG_SW_1, val); 282 283 /* Setup 1V2_DIG1 (SW3) to 1.25 */ 284 pmic_reg_read(p, REG_SW_2, &val); 285 val = (val & ~SWx_VOLT_MASK) | SWx_1_250V; 286 pmic_reg_write(p, REG_SW_2, val); 287 udelay(50); 288 289 /* Raise the core frequency to 800MHz */ 290 writel(0x0, &mxc_ccm->cacrr); 291 292 /* Set switchers in Auto in NORMAL mode & STANDBY mode */ 293 /* Setup the switcher mode for SW1 & SW2*/ 294 pmic_reg_read(p, REG_SW_4, &val); 295 val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) | 296 (SWMODE_MASK << SWMODE2_SHIFT))); 297 val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) | 298 (SWMODE_AUTO_AUTO << SWMODE2_SHIFT); 299 pmic_reg_write(p, REG_SW_4, val); 300 301 /* Setup the switcher mode for SW3 & SW4 */ 302 pmic_reg_read(p, REG_SW_5, &val); 303 val = (val & ~((SWMODE_MASK << SWMODE3_SHIFT) | 304 (SWMODE_MASK << SWMODE4_SHIFT))); 305 val |= (SWMODE_AUTO_AUTO << SWMODE3_SHIFT) | 306 (SWMODE_AUTO_AUTO << SWMODE4_SHIFT); 307 pmic_reg_write(p, REG_SW_5, val); 308 309 /* Set VDIG to 1.65V, VGEN3 to 1.8V, VCAM to 2.6V */ 310 pmic_reg_read(p, REG_SETTING_0, &val); 311 val &= ~(VCAM_MASK | VGEN3_MASK | VDIG_MASK); 312 val |= VDIG_1_65 | VGEN3_1_8 | VCAM_2_6; 313 pmic_reg_write(p, REG_SETTING_0, val); 314 315 /* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */ 316 pmic_reg_read(p, REG_SETTING_1, &val); 317 val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK); 318 val |= VSD_3_15 | VAUDIO_3_0 | VVIDEO_2_775; 319 pmic_reg_write(p, REG_SETTING_1, val); 320 321 /* Configure VGEN3 and VCAM regulators to use external PNP */ 322 val = VGEN3CONFIG | VCAMCONFIG; 323 pmic_reg_write(p, REG_MODE_1, val); 324 udelay(200); 325 326 /* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */ 327 val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG | 328 VVIDEOEN | VAUDIOEN | VSDEN; 329 pmic_reg_write(p, REG_MODE_1, val); 330 331 mxc_request_iomux(MX51_PIN_EIM_A20, IOMUX_CONFIG_ALT1); 332 gpio_direction_output(IMX_GPIO_NR(2, 14), 0); 333 334 udelay(500); 335 336 gpio_set_value(IMX_GPIO_NR(2, 14), 1); 337 } 338 339 #ifdef CONFIG_FSL_ESDHC 340 int board_mmc_getcd(struct mmc *mmc) 341 { 342 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 343 int ret; 344 345 mxc_request_iomux(MX51_PIN_GPIO1_0, IOMUX_CONFIG_ALT1); 346 gpio_direction_input(IMX_GPIO_NR(1, 0)); 347 mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0); 348 gpio_direction_input(IMX_GPIO_NR(1, 6)); 349 350 if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) 351 ret = !gpio_get_value(IMX_GPIO_NR(1, 0)); 352 else 353 ret = !gpio_get_value(IMX_GPIO_NR(1, 6)); 354 355 return ret; 356 } 357 358 int board_mmc_init(bd_t *bis) 359 { 360 u32 index; 361 s32 status = 0; 362 363 esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); 364 esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); 365 366 for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; 367 index++) { 368 switch (index) { 369 case 0: 370 mxc_request_iomux(MX51_PIN_SD1_CMD, 371 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 372 mxc_request_iomux(MX51_PIN_SD1_CLK, 373 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 374 mxc_request_iomux(MX51_PIN_SD1_DATA0, 375 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 376 mxc_request_iomux(MX51_PIN_SD1_DATA1, 377 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 378 mxc_request_iomux(MX51_PIN_SD1_DATA2, 379 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 380 mxc_request_iomux(MX51_PIN_SD1_DATA3, 381 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 382 mxc_iomux_set_pad(MX51_PIN_SD1_CMD, 383 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | 384 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | 385 PAD_CTL_PUE_PULL | 386 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); 387 mxc_iomux_set_pad(MX51_PIN_SD1_CLK, 388 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | 389 PAD_CTL_HYS_NONE | PAD_CTL_47K_PU | 390 PAD_CTL_PUE_PULL | 391 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); 392 mxc_iomux_set_pad(MX51_PIN_SD1_DATA0, 393 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | 394 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | 395 PAD_CTL_PUE_PULL | 396 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); 397 mxc_iomux_set_pad(MX51_PIN_SD1_DATA1, 398 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | 399 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | 400 PAD_CTL_PUE_PULL | 401 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); 402 mxc_iomux_set_pad(MX51_PIN_SD1_DATA2, 403 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | 404 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | 405 PAD_CTL_PUE_PULL | 406 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); 407 mxc_iomux_set_pad(MX51_PIN_SD1_DATA3, 408 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | 409 PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD | 410 PAD_CTL_PUE_PULL | 411 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); 412 mxc_request_iomux(MX51_PIN_GPIO1_0, 413 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 414 mxc_iomux_set_pad(MX51_PIN_GPIO1_0, 415 PAD_CTL_HYS_ENABLE); 416 mxc_request_iomux(MX51_PIN_GPIO1_1, 417 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 418 mxc_iomux_set_pad(MX51_PIN_GPIO1_1, 419 PAD_CTL_HYS_ENABLE); 420 break; 421 case 1: 422 mxc_request_iomux(MX51_PIN_SD2_CMD, 423 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 424 mxc_request_iomux(MX51_PIN_SD2_CLK, 425 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 426 mxc_request_iomux(MX51_PIN_SD2_DATA0, 427 IOMUX_CONFIG_ALT0); 428 mxc_request_iomux(MX51_PIN_SD2_DATA1, 429 IOMUX_CONFIG_ALT0); 430 mxc_request_iomux(MX51_PIN_SD2_DATA2, 431 IOMUX_CONFIG_ALT0); 432 mxc_request_iomux(MX51_PIN_SD2_DATA3, 433 IOMUX_CONFIG_ALT0); 434 mxc_iomux_set_pad(MX51_PIN_SD2_CMD, 435 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | 436 PAD_CTL_SRE_FAST); 437 mxc_iomux_set_pad(MX51_PIN_SD2_CLK, 438 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | 439 PAD_CTL_SRE_FAST); 440 mxc_iomux_set_pad(MX51_PIN_SD2_DATA0, 441 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | 442 PAD_CTL_SRE_FAST); 443 mxc_iomux_set_pad(MX51_PIN_SD2_DATA1, 444 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | 445 PAD_CTL_SRE_FAST); 446 mxc_iomux_set_pad(MX51_PIN_SD2_DATA2, 447 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | 448 PAD_CTL_SRE_FAST); 449 mxc_iomux_set_pad(MX51_PIN_SD2_DATA3, 450 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | 451 PAD_CTL_SRE_FAST); 452 mxc_request_iomux(MX51_PIN_SD2_CMD, 453 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 454 mxc_request_iomux(MX51_PIN_GPIO1_6, 455 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 456 mxc_iomux_set_pad(MX51_PIN_GPIO1_6, 457 PAD_CTL_HYS_ENABLE); 458 mxc_request_iomux(MX51_PIN_GPIO1_5, 459 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 460 mxc_iomux_set_pad(MX51_PIN_GPIO1_5, 461 PAD_CTL_HYS_ENABLE); 462 break; 463 default: 464 printf("Warning: you configured more ESDHC controller" 465 "(%d) as supported by the board(2)\n", 466 CONFIG_SYS_FSL_ESDHC_NUM); 467 return status; 468 } 469 status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]); 470 } 471 return status; 472 } 473 #endif 474 475 int board_early_init_f(void) 476 { 477 setup_iomux_uart(); 478 setup_iomux_fec(); 479 #ifdef CONFIG_USB_EHCI_MX5 480 setup_usb_h1(); 481 #endif 482 setup_iomux_lcd(); 483 484 return 0; 485 } 486 487 int board_init(void) 488 { 489 /* address of boot parameters */ 490 gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; 491 492 return 0; 493 } 494 495 #ifdef CONFIG_BOARD_LATE_INIT 496 int board_late_init(void) 497 { 498 #ifdef CONFIG_MXC_SPI 499 setup_iomux_spi(); 500 power_init(); 501 #endif 502 503 return 0; 504 } 505 #endif 506 507 /* 508 * Do not overwrite the console 509 * Use always serial for U-Boot console 510 */ 511 int overwrite_console(void) 512 { 513 return 1; 514 } 515 516 int checkboard(void) 517 { 518 puts("Board: MX51EVK\n"); 519 520 return 0; 521 } 522