1 /* 2 * (C) Copyright 2009 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 #include <common.h> 24 #include <asm/io.h> 25 #include <asm/gpio.h> 26 #include <asm/arch/imx-regs.h> 27 #include <asm/arch/mx5x_pins.h> 28 #include <asm/arch/iomux.h> 29 #include <asm/errno.h> 30 #include <asm/arch/sys_proto.h> 31 #include <asm/arch/crm_regs.h> 32 #include <asm/arch/clock.h> 33 #include <i2c.h> 34 #include <mmc.h> 35 #include <fsl_esdhc.h> 36 #include <pmic.h> 37 #include <fsl_pmic.h> 38 #include <mc13892.h> 39 #include <usb/ehci-fsl.h> 40 #include <linux/fb.h> 41 #include <ipu_pixfmt.h> 42 43 #define MX51EVK_LCD_3V3 IMX_GPIO_NR(4, 9) 44 #define MX51EVK_LCD_5V IMX_GPIO_NR(4, 10) 45 #define MX51EVK_LCD_BACKLIGHT IMX_GPIO_NR(3, 4) 46 47 DECLARE_GLOBAL_DATA_PTR; 48 49 #ifdef CONFIG_FSL_ESDHC 50 struct fsl_esdhc_cfg esdhc_cfg[2] = { 51 {MMC_SDHC1_BASE_ADDR}, 52 {MMC_SDHC2_BASE_ADDR}, 53 }; 54 #endif 55 56 int dram_init(void) 57 { 58 /* dram_init must store complete ramsize in gd->ram_size */ 59 gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, 60 PHYS_SDRAM_1_SIZE); 61 return 0; 62 } 63 64 u32 get_board_rev(void) 65 { 66 u32 rev = get_cpu_rev(); 67 if (!gpio_get_value(IMX_GPIO_NR(1, 22))) 68 rev |= BOARD_REV_2_0 << BOARD_VER_OFFSET; 69 return rev; 70 } 71 72 static void setup_iomux_uart(void) 73 { 74 unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE | 75 PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH; 76 77 mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0); 78 mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad | PAD_CTL_SRE_FAST); 79 mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0); 80 mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad | PAD_CTL_SRE_FAST); 81 mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0); 82 mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad); 83 mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0); 84 mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad); 85 } 86 87 static void setup_iomux_fec(void) 88 { 89 /*FEC_MDIO*/ 90 mxc_request_iomux(MX51_PIN_EIM_EB2 , IOMUX_CONFIG_ALT3); 91 mxc_iomux_set_pad(MX51_PIN_EIM_EB2 , 0x1FD); 92 93 /*FEC_MDC*/ 94 mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT2); 95 mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, 0x2004); 96 97 /* FEC RDATA[3] */ 98 mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3); 99 mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180); 100 101 /* FEC RDATA[2] */ 102 mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3); 103 mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180); 104 105 /* FEC RDATA[1] */ 106 mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3); 107 mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180); 108 109 /* FEC RDATA[0] */ 110 mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2); 111 mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180); 112 113 /* FEC TDATA[3] */ 114 mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT2); 115 mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, 0x2004); 116 117 /* FEC TDATA[2] */ 118 mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT2); 119 mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, 0x2004); 120 121 /* FEC TDATA[1] */ 122 mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT2); 123 mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, 0x2004); 124 125 /* FEC TDATA[0] */ 126 mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT2); 127 mxc_iomux_set_pad(MX51_PIN_NANDF_D8, 0x2004); 128 129 /* FEC TX_EN */ 130 mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT1); 131 mxc_iomux_set_pad(MX51_PIN_NANDF_CS7, 0x2004); 132 133 /* FEC TX_ER */ 134 mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT2); 135 mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, 0x2004); 136 137 /* FEC TX_CLK */ 138 mxc_request_iomux(MX51_PIN_NANDF_RDY_INT, IOMUX_CONFIG_ALT1); 139 mxc_iomux_set_pad(MX51_PIN_NANDF_RDY_INT, 0x2180); 140 141 /* FEC TX_COL */ 142 mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1); 143 mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180); 144 145 /* FEC RX_CLK */ 146 mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1); 147 mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180); 148 149 /* FEC RX_CRS */ 150 mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT3); 151 mxc_iomux_set_pad(MX51_PIN_EIM_CS5, 0x180); 152 153 /* FEC RX_ER */ 154 mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3); 155 mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180); 156 157 /* FEC RX_DV */ 158 mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT2); 159 mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180); 160 } 161 162 #ifdef CONFIG_MXC_SPI 163 static void setup_iomux_spi(void) 164 { 165 /* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */ 166 mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0); 167 mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI, 0x105); 168 169 /* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */ 170 mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0); 171 mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO, 0x105); 172 173 /* de-select SS1 of instance: ecspi1. */ 174 mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3); 175 mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1, 0x85); 176 177 /* 000: Select mux mode: ALT0 mux port: SS0 ecspi1 */ 178 mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0); 179 mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0, 0x185); 180 181 /* 000: Select mux mode: ALT0 mux port: RDY of instance: ecspi1. */ 182 mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0); 183 mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x180); 184 185 /* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */ 186 mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0); 187 mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK, 0x105); 188 } 189 #endif 190 191 #ifdef CONFIG_USB_EHCI_MX5 192 #define MX51EVK_USBH1_HUB_RST IOMUX_TO_GPIO(MX51_PIN_GPIO1_7) /* GPIO1_7 */ 193 #define MX51EVK_USBH1_STP IOMUX_TO_GPIO(MX51_PIN_USBH1_STP) /* GPIO1_27 */ 194 #define MX51EVK_USB_CLK_EN_B IOMUX_TO_GPIO(MX51_PIN_EIM_D18) /* GPIO2_1 */ 195 #define MX51EVK_USB_PHY_RESET IOMUX_TO_GPIO(MX51_PIN_EIM_D21) /* GPIO2_5 */ 196 197 #define USBH1_PAD (PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | \ 198 PAD_CTL_100K_PU | PAD_CTL_PUE_PULL | \ 199 PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE) 200 #define GPIO_PAD (PAD_CTL_DRV_HIGH | PAD_CTL_PKE_ENABLE | \ 201 PAD_CTL_SRE_FAST) 202 #define NO_PAD (1 << 16) 203 204 static void setup_usb_h1(void) 205 { 206 setup_iomux_usb_h1(); 207 208 /* GPIO_1_7 for USBH1 hub reset */ 209 mxc_request_iomux(MX51_PIN_GPIO1_7, IOMUX_CONFIG_ALT0); 210 mxc_iomux_set_pad(MX51_PIN_GPIO1_7, NO_PAD); 211 212 /* GPIO_2_1 */ 213 mxc_request_iomux(MX51_PIN_EIM_D17, IOMUX_CONFIG_ALT1); 214 mxc_iomux_set_pad(MX51_PIN_EIM_D17, GPIO_PAD); 215 216 /* GPIO_2_5 for USB PHY reset */ 217 mxc_request_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT1); 218 mxc_iomux_set_pad(MX51_PIN_EIM_D21, GPIO_PAD); 219 } 220 221 int board_ehci_hcd_init(int port) 222 { 223 /* Set USBH1_STP to GPIO and toggle it */ 224 mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_GPIO); 225 mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USBH1_PAD); 226 227 gpio_direction_output(MX51EVK_USBH1_STP, 0); 228 gpio_direction_output(MX51EVK_USB_PHY_RESET, 0); 229 mdelay(10); 230 gpio_set_value(MX51EVK_USBH1_STP, 1); 231 232 /* Set back USBH1_STP to be function */ 233 mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_ALT0); 234 mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USBH1_PAD); 235 236 /* De-assert USB PHY RESETB */ 237 gpio_set_value(MX51EVK_USB_PHY_RESET, 1); 238 239 /* Drive USB_CLK_EN_B line low */ 240 gpio_direction_output(MX51EVK_USB_CLK_EN_B, 0); 241 242 /* Reset USB hub */ 243 gpio_direction_output(MX51EVK_USBH1_HUB_RST, 0); 244 mdelay(2); 245 gpio_set_value(MX51EVK_USBH1_HUB_RST, 1); 246 return 0; 247 } 248 #endif 249 250 static void power_init(void) 251 { 252 unsigned int val; 253 struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE; 254 struct pmic *p; 255 256 pmic_init(); 257 p = get_pmic(); 258 259 /* Write needed to Power Gate 2 register */ 260 pmic_reg_read(p, REG_POWER_MISC, &val); 261 val &= ~PWGT2SPIEN; 262 pmic_reg_write(p, REG_POWER_MISC, val); 263 264 /* Externally powered */ 265 pmic_reg_read(p, REG_CHARGE, &val); 266 val |= ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | CHGAUTOB; 267 pmic_reg_write(p, REG_CHARGE, val); 268 269 /* power up the system first */ 270 pmic_reg_write(p, REG_POWER_MISC, PWUP); 271 272 /* Set core voltage to 1.1V */ 273 pmic_reg_read(p, REG_SW_0, &val); 274 val = (val & ~SWx_VOLT_MASK) | SWx_1_100V; 275 pmic_reg_write(p, REG_SW_0, val); 276 277 /* Setup VCC (SW2) to 1.25 */ 278 pmic_reg_read(p, REG_SW_1, &val); 279 val = (val & ~SWx_VOLT_MASK) | SWx_1_250V; 280 pmic_reg_write(p, REG_SW_1, val); 281 282 /* Setup 1V2_DIG1 (SW3) to 1.25 */ 283 pmic_reg_read(p, REG_SW_2, &val); 284 val = (val & ~SWx_VOLT_MASK) | SWx_1_250V; 285 pmic_reg_write(p, REG_SW_2, val); 286 udelay(50); 287 288 /* Raise the core frequency to 800MHz */ 289 writel(0x0, &mxc_ccm->cacrr); 290 291 /* Set switchers in Auto in NORMAL mode & STANDBY mode */ 292 /* Setup the switcher mode for SW1 & SW2*/ 293 pmic_reg_read(p, REG_SW_4, &val); 294 val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) | 295 (SWMODE_MASK << SWMODE2_SHIFT))); 296 val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) | 297 (SWMODE_AUTO_AUTO << SWMODE2_SHIFT); 298 pmic_reg_write(p, REG_SW_4, val); 299 300 /* Setup the switcher mode for SW3 & SW4 */ 301 pmic_reg_read(p, REG_SW_5, &val); 302 val = (val & ~((SWMODE_MASK << SWMODE3_SHIFT) | 303 (SWMODE_MASK << SWMODE4_SHIFT))); 304 val |= (SWMODE_AUTO_AUTO << SWMODE3_SHIFT) | 305 (SWMODE_AUTO_AUTO << SWMODE4_SHIFT); 306 pmic_reg_write(p, REG_SW_5, val); 307 308 /* Set VDIG to 1.65V, VGEN3 to 1.8V, VCAM to 2.6V */ 309 pmic_reg_read(p, REG_SETTING_0, &val); 310 val &= ~(VCAM_MASK | VGEN3_MASK | VDIG_MASK); 311 val |= VDIG_1_65 | VGEN3_1_8 | VCAM_2_6; 312 pmic_reg_write(p, REG_SETTING_0, val); 313 314 /* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */ 315 pmic_reg_read(p, REG_SETTING_1, &val); 316 val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK); 317 val |= VSD_3_15 | VAUDIO_3_0 | VVIDEO_2_775; 318 pmic_reg_write(p, REG_SETTING_1, val); 319 320 /* Configure VGEN3 and VCAM regulators to use external PNP */ 321 val = VGEN3CONFIG | VCAMCONFIG; 322 pmic_reg_write(p, REG_MODE_1, val); 323 udelay(200); 324 325 /* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */ 326 val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG | 327 VVIDEOEN | VAUDIOEN | VSDEN; 328 pmic_reg_write(p, REG_MODE_1, val); 329 330 mxc_request_iomux(MX51_PIN_EIM_A20, IOMUX_CONFIG_ALT1); 331 gpio_direction_output(IMX_GPIO_NR(2, 14), 0); 332 333 udelay(500); 334 335 gpio_set_value(IMX_GPIO_NR(2, 14), 1); 336 } 337 338 #ifdef CONFIG_FSL_ESDHC 339 int board_mmc_getcd(struct mmc *mmc) 340 { 341 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 342 int ret; 343 344 mxc_request_iomux(MX51_PIN_GPIO1_0, IOMUX_CONFIG_ALT1); 345 gpio_direction_input(IMX_GPIO_NR(1, 0)); 346 mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0); 347 gpio_direction_input(IMX_GPIO_NR(1, 6)); 348 349 if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) 350 ret = !gpio_get_value(IMX_GPIO_NR(1, 0)); 351 else 352 ret = !gpio_get_value(IMX_GPIO_NR(1, 6)); 353 354 return ret; 355 } 356 357 int board_mmc_init(bd_t *bis) 358 { 359 u32 index; 360 s32 status = 0; 361 362 esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); 363 esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); 364 365 for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; 366 index++) { 367 switch (index) { 368 case 0: 369 mxc_request_iomux(MX51_PIN_SD1_CMD, 370 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 371 mxc_request_iomux(MX51_PIN_SD1_CLK, 372 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 373 mxc_request_iomux(MX51_PIN_SD1_DATA0, 374 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 375 mxc_request_iomux(MX51_PIN_SD1_DATA1, 376 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 377 mxc_request_iomux(MX51_PIN_SD1_DATA2, 378 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 379 mxc_request_iomux(MX51_PIN_SD1_DATA3, 380 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 381 mxc_iomux_set_pad(MX51_PIN_SD1_CMD, 382 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | 383 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | 384 PAD_CTL_PUE_PULL | 385 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); 386 mxc_iomux_set_pad(MX51_PIN_SD1_CLK, 387 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | 388 PAD_CTL_HYS_NONE | PAD_CTL_47K_PU | 389 PAD_CTL_PUE_PULL | 390 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); 391 mxc_iomux_set_pad(MX51_PIN_SD1_DATA0, 392 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | 393 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | 394 PAD_CTL_PUE_PULL | 395 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); 396 mxc_iomux_set_pad(MX51_PIN_SD1_DATA1, 397 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | 398 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | 399 PAD_CTL_PUE_PULL | 400 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); 401 mxc_iomux_set_pad(MX51_PIN_SD1_DATA2, 402 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | 403 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | 404 PAD_CTL_PUE_PULL | 405 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); 406 mxc_iomux_set_pad(MX51_PIN_SD1_DATA3, 407 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | 408 PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD | 409 PAD_CTL_PUE_PULL | 410 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); 411 mxc_request_iomux(MX51_PIN_GPIO1_0, 412 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 413 mxc_iomux_set_pad(MX51_PIN_GPIO1_0, 414 PAD_CTL_HYS_ENABLE); 415 mxc_request_iomux(MX51_PIN_GPIO1_1, 416 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 417 mxc_iomux_set_pad(MX51_PIN_GPIO1_1, 418 PAD_CTL_HYS_ENABLE); 419 break; 420 case 1: 421 mxc_request_iomux(MX51_PIN_SD2_CMD, 422 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 423 mxc_request_iomux(MX51_PIN_SD2_CLK, 424 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 425 mxc_request_iomux(MX51_PIN_SD2_DATA0, 426 IOMUX_CONFIG_ALT0); 427 mxc_request_iomux(MX51_PIN_SD2_DATA1, 428 IOMUX_CONFIG_ALT0); 429 mxc_request_iomux(MX51_PIN_SD2_DATA2, 430 IOMUX_CONFIG_ALT0); 431 mxc_request_iomux(MX51_PIN_SD2_DATA3, 432 IOMUX_CONFIG_ALT0); 433 mxc_iomux_set_pad(MX51_PIN_SD2_CMD, 434 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | 435 PAD_CTL_SRE_FAST); 436 mxc_iomux_set_pad(MX51_PIN_SD2_CLK, 437 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | 438 PAD_CTL_SRE_FAST); 439 mxc_iomux_set_pad(MX51_PIN_SD2_DATA0, 440 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | 441 PAD_CTL_SRE_FAST); 442 mxc_iomux_set_pad(MX51_PIN_SD2_DATA1, 443 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | 444 PAD_CTL_SRE_FAST); 445 mxc_iomux_set_pad(MX51_PIN_SD2_DATA2, 446 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | 447 PAD_CTL_SRE_FAST); 448 mxc_iomux_set_pad(MX51_PIN_SD2_DATA3, 449 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | 450 PAD_CTL_SRE_FAST); 451 mxc_request_iomux(MX51_PIN_SD2_CMD, 452 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 453 mxc_request_iomux(MX51_PIN_GPIO1_6, 454 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 455 mxc_iomux_set_pad(MX51_PIN_GPIO1_6, 456 PAD_CTL_HYS_ENABLE); 457 mxc_request_iomux(MX51_PIN_GPIO1_5, 458 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); 459 mxc_iomux_set_pad(MX51_PIN_GPIO1_5, 460 PAD_CTL_HYS_ENABLE); 461 break; 462 default: 463 printf("Warning: you configured more ESDHC controller" 464 "(%d) as supported by the board(2)\n", 465 CONFIG_SYS_FSL_ESDHC_NUM); 466 return status; 467 } 468 status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]); 469 } 470 return status; 471 } 472 #endif 473 474 static struct fb_videomode claa_wvga = { 475 .name = "CLAA07LC0ACW", 476 .refresh = 57, 477 .xres = 800, 478 .yres = 480, 479 .pixclock = 37037, 480 .left_margin = 40, 481 .right_margin = 60, 482 .upper_margin = 10, 483 .lower_margin = 10, 484 .hsync_len = 20, 485 .vsync_len = 10, 486 .sync = 0, 487 .vmode = FB_VMODE_NONINTERLACED 488 }; 489 490 void lcd_iomux(void) 491 { 492 /* DI2_PIN15 */ 493 mxc_request_iomux(MX51_PIN_DI_GP4, IOMUX_CONFIG_ALT4); 494 495 /* Pad settings for MX51_PIN_DI2_DISP_CLK */ 496 mxc_iomux_set_pad(MX51_PIN_DI2_DISP_CLK, PAD_CTL_HYS_NONE | 497 PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | 498 PAD_CTL_DRV_MAX | PAD_CTL_SRE_SLOW); 499 500 /* Turn on 3.3V voltage for LCD */ 501 mxc_request_iomux(MX51_PIN_CSI2_D12, IOMUX_CONFIG_ALT3); 502 gpio_direction_output(MX51EVK_LCD_3V3, 1); 503 504 /* Turn on 5V voltage for LCD */ 505 mxc_request_iomux(MX51_PIN_CSI2_D13, IOMUX_CONFIG_ALT3); 506 gpio_direction_output(MX51EVK_LCD_5V, 1); 507 508 /* Turn on GPIO backlight */ 509 mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4); 510 mxc_iomux_set_input(MX51_GPIO3_IPP_IND_G_IN_4_SELECT_INPUT, 511 INPUT_CTL_PATH1); 512 gpio_direction_output(MX51EVK_LCD_BACKLIGHT, 1); 513 } 514 515 void lcd_enable(void) 516 { 517 int ret = ipuv3_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565); 518 if (ret) 519 printf("LCD cannot be configured: %d\n", ret); 520 } 521 522 int board_early_init_f(void) 523 { 524 setup_iomux_uart(); 525 setup_iomux_fec(); 526 #ifdef CONFIG_USB_EHCI_MX5 527 setup_usb_h1(); 528 #endif 529 lcd_iomux(); 530 531 return 0; 532 } 533 534 int board_init(void) 535 { 536 /* address of boot parameters */ 537 gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; 538 539 lcd_enable(); 540 541 return 0; 542 } 543 544 #ifdef CONFIG_BOARD_LATE_INIT 545 int board_late_init(void) 546 { 547 #ifdef CONFIG_MXC_SPI 548 setup_iomux_spi(); 549 power_init(); 550 #endif 551 552 return 0; 553 } 554 #endif 555 556 /* 557 * Do not overwrite the console 558 * Use always serial for U-Boot console 559 */ 560 int overwrite_console(void) 561 { 562 return 1; 563 } 564 565 int checkboard(void) 566 { 567 puts("Board: MX51EVK\n"); 568 569 return 0; 570 } 571