1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
4  *
5  * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
6  */
7 
8 #include <common.h>
9 #include <asm/io.h>
10 #include <linux/errno.h>
11 #include <asm/arch/imx-regs.h>
12 #include <asm/arch/crm_regs.h>
13 #include <asm/arch/clock.h>
14 #include <asm/arch/iomux-mx35.h>
15 #include <i2c.h>
16 #include <power/pmic.h>
17 #include <fsl_pmic.h>
18 #include <mmc.h>
19 #include <fsl_esdhc.h>
20 #include <mc9sdz60.h>
21 #include <mc13892.h>
22 #include <linux/types.h>
23 #include <asm/gpio.h>
24 #include <asm/arch/sys_proto.h>
25 #include <netdev.h>
26 #include <asm/mach-types.h>
27 
28 #ifndef CONFIG_BOARD_LATE_INIT
29 #error "CONFIG_BOARD_LATE_INIT must be set for this board"
30 #endif
31 
32 #ifndef CONFIG_BOARD_EARLY_INIT_F
33 #error "CONFIG_BOARD_EARLY_INIT_F must be set for this board"
34 #endif
35 
36 DECLARE_GLOBAL_DATA_PTR;
37 
38 int dram_init(void)
39 {
40 	u32 size1, size2;
41 
42 	size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
43 	size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
44 
45 	gd->ram_size = size1 + size2;
46 
47 	return 0;
48 }
49 
50 int dram_init_banksize(void)
51 {
52 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
53 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
54 
55 	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
56 	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
57 
58 	return 0;
59 }
60 
61 #define I2C_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_ODE)
62 
63 static void setup_iomux_i2c(void)
64 {
65 	static const iomux_v3_cfg_t i2c1_pads[] = {
66 		NEW_PAD_CTRL(MX35_PAD_I2C1_CLK__I2C1_SCL, I2C_PAD_CTRL),
67 		NEW_PAD_CTRL(MX35_PAD_I2C1_DAT__I2C1_SDA, I2C_PAD_CTRL),
68 	};
69 
70 	/* setup pins for I2C1 */
71 	imx_iomux_v3_setup_multiple_pads(i2c1_pads, ARRAY_SIZE(i2c1_pads));
72 }
73 
74 
75 static void setup_iomux_spi(void)
76 {
77 	static const iomux_v3_cfg_t spi_pads[] = {
78 		MX35_PAD_CSPI1_MOSI__CSPI1_MOSI,
79 		MX35_PAD_CSPI1_MISO__CSPI1_MISO,
80 		MX35_PAD_CSPI1_SS0__CSPI1_SS0,
81 		MX35_PAD_CSPI1_SS1__CSPI1_SS1,
82 		MX35_PAD_CSPI1_SCLK__CSPI1_SCLK,
83 	};
84 
85 	imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads));
86 }
87 
88 #define USBOTG_IN_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | \
89 				 PAD_CTL_DSE_LOW | PAD_CTL_SRE_SLOW)
90 #define USBOTG_OUT_PAD_CTRL	(PAD_CTL_DSE_LOW | PAD_CTL_SRE_SLOW)
91 
92 static void setup_iomux_usbotg(void)
93 {
94 	static const iomux_v3_cfg_t usbotg_pads[] = {
95 		NEW_PAD_CTRL(MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
96 				USBOTG_OUT_PAD_CTRL),
97 		NEW_PAD_CTRL(MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
98 				USBOTG_IN_PAD_CTRL),
99 	};
100 
101 	/* Set up pins for USBOTG. */
102 	imx_iomux_v3_setup_multiple_pads(usbotg_pads, ARRAY_SIZE(usbotg_pads));
103 }
104 
105 #define FEC_PAD_CTRL	(PAD_CTL_DSE_LOW | PAD_CTL_SRE_SLOW)
106 
107 static void setup_iomux_fec(void)
108 {
109 	static const iomux_v3_cfg_t fec_pads[] = {
110 		NEW_PAD_CTRL(MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, FEC_PAD_CTRL |
111 					PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
112 		NEW_PAD_CTRL(MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, FEC_PAD_CTRL |
113 					PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
114 		NEW_PAD_CTRL(MX35_PAD_FEC_RX_DV__FEC_RX_DV, FEC_PAD_CTRL |
115 					PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
116 		NEW_PAD_CTRL(MX35_PAD_FEC_COL__FEC_COL, FEC_PAD_CTRL |
117 					PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
118 		NEW_PAD_CTRL(MX35_PAD_FEC_RDATA0__FEC_RDATA_0, FEC_PAD_CTRL |
119 					PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
120 		NEW_PAD_CTRL(MX35_PAD_FEC_TDATA0__FEC_TDATA_0, FEC_PAD_CTRL),
121 		NEW_PAD_CTRL(MX35_PAD_FEC_TX_EN__FEC_TX_EN, FEC_PAD_CTRL),
122 		NEW_PAD_CTRL(MX35_PAD_FEC_MDC__FEC_MDC, FEC_PAD_CTRL),
123 		NEW_PAD_CTRL(MX35_PAD_FEC_MDIO__FEC_MDIO, FEC_PAD_CTRL |
124 					PAD_CTL_HYS | PAD_CTL_PUS_22K_UP),
125 		NEW_PAD_CTRL(MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, FEC_PAD_CTRL),
126 		NEW_PAD_CTRL(MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, FEC_PAD_CTRL |
127 					PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
128 		NEW_PAD_CTRL(MX35_PAD_FEC_CRS__FEC_CRS, FEC_PAD_CTRL |
129 					PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
130 		NEW_PAD_CTRL(MX35_PAD_FEC_RDATA1__FEC_RDATA_1, FEC_PAD_CTRL |
131 					PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
132 		NEW_PAD_CTRL(MX35_PAD_FEC_TDATA1__FEC_TDATA_1, FEC_PAD_CTRL),
133 		NEW_PAD_CTRL(MX35_PAD_FEC_RDATA2__FEC_RDATA_2, FEC_PAD_CTRL |
134 					PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
135 		NEW_PAD_CTRL(MX35_PAD_FEC_TDATA2__FEC_TDATA_2, FEC_PAD_CTRL),
136 		NEW_PAD_CTRL(MX35_PAD_FEC_RDATA3__FEC_RDATA_3, FEC_PAD_CTRL |
137 					PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
138 		NEW_PAD_CTRL(MX35_PAD_FEC_TDATA3__FEC_TDATA_3, FEC_PAD_CTRL),
139 	};
140 
141 	/* setup pins for FEC */
142 	imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
143 }
144 
145 int board_early_init_f(void)
146 {
147 	struct ccm_regs *ccm =
148 		(struct ccm_regs *)IMX_CCM_BASE;
149 
150 	/* enable clocks */
151 	writel(readl(&ccm->cgr0) |
152 		MXC_CCM_CGR0_EMI_MASK |
153 		MXC_CCM_CGR0_EDIO_MASK |
154 		MXC_CCM_CGR0_EPIT1_MASK,
155 		&ccm->cgr0);
156 
157 	writel(readl(&ccm->cgr1) |
158 		MXC_CCM_CGR1_FEC_MASK |
159 		MXC_CCM_CGR1_GPIO1_MASK |
160 		MXC_CCM_CGR1_GPIO2_MASK |
161 		MXC_CCM_CGR1_GPIO3_MASK |
162 		MXC_CCM_CGR1_I2C1_MASK |
163 		MXC_CCM_CGR1_I2C2_MASK |
164 		MXC_CCM_CGR1_IPU_MASK,
165 		&ccm->cgr1);
166 
167 	/* Setup NAND */
168 	__raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr);
169 
170 	setup_iomux_i2c();
171 	setup_iomux_usbotg();
172 	setup_iomux_fec();
173 	setup_iomux_spi();
174 
175 	return 0;
176 }
177 
178 int board_init(void)
179 {
180 	gd->bd->bi_arch_number = MACH_TYPE_MX35_3DS;	/* board id for linux */
181 	/* address of boot parameters */
182 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
183 
184 	return 0;
185 }
186 
187 static inline int pmic_detect(void)
188 {
189 	unsigned int id;
190 	struct pmic *p = pmic_get("FSL_PMIC");
191 	if (!p)
192 		return -ENODEV;
193 
194 	pmic_reg_read(p, REG_IDENTIFICATION, &id);
195 
196 	id = (id >> 6) & 0x7;
197 	if (id == 0x7)
198 		return 1;
199 	return 0;
200 }
201 
202 u32 get_board_rev(void)
203 {
204 	int rev;
205 
206 	rev = pmic_detect();
207 
208 	return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
209 }
210 
211 int board_late_init(void)
212 {
213 	u8 val;
214 	u32 pmic_val;
215 	struct pmic *p;
216 	int ret;
217 
218 	ret = pmic_init(I2C_0);
219 	if (ret)
220 		return ret;
221 
222 	if (pmic_detect()) {
223 		p = pmic_get("FSL_PMIC");
224 		imx_iomux_v3_setup_pad(MX35_PAD_WDOG_RST__WDOG_WDOG_B);
225 
226 		pmic_reg_read(p, REG_SETTING_0, &pmic_val);
227 		pmic_reg_write(p, REG_SETTING_0,
228 			pmic_val | VO_1_30V | VO_1_50V);
229 		pmic_reg_read(p, REG_MODE_0, &pmic_val);
230 		pmic_reg_write(p, REG_MODE_0, pmic_val | VGEN3EN);
231 
232 		imx_iomux_v3_setup_pad(MX35_PAD_COMPARE__GPIO1_5);
233 
234 		gpio_direction_output(IMX_GPIO_NR(1, 5), 1);
235 	}
236 
237 	val = mc9sdz60_reg_read(MC9SDZ60_REG_GPIO_1) | 0x04;
238 	mc9sdz60_reg_write(MC9SDZ60_REG_GPIO_1, val);
239 	mdelay(200);
240 
241 	val = mc9sdz60_reg_read(MC9SDZ60_REG_RESET_1) & 0x7F;
242 	mc9sdz60_reg_write(MC9SDZ60_REG_RESET_1, val);
243 	mdelay(200);
244 
245 	val |= 0x80;
246 	mc9sdz60_reg_write(MC9SDZ60_REG_RESET_1, val);
247 
248 	/* Print board revision */
249 	printf("Board: MX35 PDK %d.0\n", ((get_board_rev() >> 8) + 1) & 0x0F);
250 
251 	return 0;
252 }
253 
254 int board_eth_init(bd_t *bis)
255 {
256 #if defined(CONFIG_SMC911X)
257 	int rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
258 	if (rc)
259 		return rc;
260 #endif
261 	return cpu_eth_init(bis);
262 }
263 
264 #if defined(CONFIG_FSL_ESDHC)
265 
266 struct fsl_esdhc_cfg esdhc_cfg = {MMC_SDHC1_BASE_ADDR};
267 
268 int board_mmc_init(bd_t *bis)
269 {
270 	static const iomux_v3_cfg_t sdhc1_pads[] = {
271 		MX35_PAD_SD1_CMD__ESDHC1_CMD,
272 		MX35_PAD_SD1_CLK__ESDHC1_CLK,
273 		MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
274 		MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
275 		MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
276 		MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
277 	};
278 
279 	/* configure pins for SDHC1 only */
280 	imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads));
281 
282 	esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
283 	return fsl_esdhc_initialize(bis, &esdhc_cfg);
284 }
285 
286 int board_mmc_getcd(struct mmc *mmc)
287 {
288 	return !(mc9sdz60_reg_read(MC9SDZ60_REG_DES_FLAG) & 0x4);
289 }
290 #endif
291