1 /* 2 * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> 3 * 4 * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #include <common.h> 10 #include <asm/io.h> 11 #include <asm/errno.h> 12 #include <asm/arch/imx-regs.h> 13 #include <asm/arch/crm_regs.h> 14 #include <asm/arch/clock.h> 15 #include <asm/arch/iomux-mx35.h> 16 #include <i2c.h> 17 #include <power/pmic.h> 18 #include <fsl_pmic.h> 19 #include <mmc.h> 20 #include <fsl_esdhc.h> 21 #include <mc9sdz60.h> 22 #include <mc13892.h> 23 #include <linux/types.h> 24 #include <asm/gpio.h> 25 #include <asm/arch/sys_proto.h> 26 #include <netdev.h> 27 28 #ifndef CONFIG_BOARD_LATE_INIT 29 #error "CONFIG_BOARD_LATE_INIT must be set for this board" 30 #endif 31 32 #ifndef CONFIG_BOARD_EARLY_INIT_F 33 #error "CONFIG_BOARD_EARLY_INIT_F must be set for this board" 34 #endif 35 36 DECLARE_GLOBAL_DATA_PTR; 37 38 int dram_init(void) 39 { 40 u32 size1, size2; 41 42 size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); 43 size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); 44 45 gd->ram_size = size1 + size2; 46 47 return 0; 48 } 49 50 void dram_init_banksize(void) 51 { 52 gd->bd->bi_dram[0].start = PHYS_SDRAM_1; 53 gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; 54 55 gd->bd->bi_dram[1].start = PHYS_SDRAM_2; 56 gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; 57 } 58 59 #define I2C_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_ODE) 60 61 static void setup_iomux_i2c(void) 62 { 63 static const iomux_v3_cfg_t i2c1_pads[] = { 64 NEW_PAD_CTRL(MX35_PAD_I2C1_CLK__I2C1_SCL, I2C_PAD_CTRL), 65 NEW_PAD_CTRL(MX35_PAD_I2C1_DAT__I2C1_SDA, I2C_PAD_CTRL), 66 }; 67 68 /* setup pins for I2C1 */ 69 imx_iomux_v3_setup_multiple_pads(i2c1_pads, ARRAY_SIZE(i2c1_pads)); 70 } 71 72 73 static void setup_iomux_spi(void) 74 { 75 static const iomux_v3_cfg_t spi_pads[] = { 76 MX35_PAD_CSPI1_MOSI__CSPI1_MOSI, 77 MX35_PAD_CSPI1_MISO__CSPI1_MISO, 78 MX35_PAD_CSPI1_SS0__CSPI1_SS0, 79 MX35_PAD_CSPI1_SS1__CSPI1_SS1, 80 MX35_PAD_CSPI1_SCLK__CSPI1_SCLK, 81 }; 82 83 imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads)); 84 } 85 86 #define USBOTG_IN_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | \ 87 PAD_CTL_DSE_LOW | PAD_CTL_SRE_SLOW) 88 #define USBOTG_OUT_PAD_CTRL (PAD_CTL_DSE_LOW | PAD_CTL_SRE_SLOW) 89 90 static void setup_iomux_usbotg(void) 91 { 92 static const iomux_v3_cfg_t usbotg_pads[] = { 93 NEW_PAD_CTRL(MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR, 94 USBOTG_OUT_PAD_CTRL), 95 NEW_PAD_CTRL(MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC, 96 USBOTG_IN_PAD_CTRL), 97 }; 98 99 /* Set up pins for USBOTG. */ 100 imx_iomux_v3_setup_multiple_pads(usbotg_pads, ARRAY_SIZE(usbotg_pads)); 101 } 102 103 #define FEC_PAD_CTRL (PAD_CTL_DSE_LOW | PAD_CTL_SRE_SLOW) 104 105 static void setup_iomux_fec(void) 106 { 107 static const iomux_v3_cfg_t fec_pads[] = { 108 NEW_PAD_CTRL(MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, FEC_PAD_CTRL | 109 PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), 110 NEW_PAD_CTRL(MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, FEC_PAD_CTRL | 111 PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), 112 NEW_PAD_CTRL(MX35_PAD_FEC_RX_DV__FEC_RX_DV, FEC_PAD_CTRL | 113 PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), 114 NEW_PAD_CTRL(MX35_PAD_FEC_COL__FEC_COL, FEC_PAD_CTRL | 115 PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), 116 NEW_PAD_CTRL(MX35_PAD_FEC_RDATA0__FEC_RDATA_0, FEC_PAD_CTRL | 117 PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), 118 NEW_PAD_CTRL(MX35_PAD_FEC_TDATA0__FEC_TDATA_0, FEC_PAD_CTRL), 119 NEW_PAD_CTRL(MX35_PAD_FEC_TX_EN__FEC_TX_EN, FEC_PAD_CTRL), 120 NEW_PAD_CTRL(MX35_PAD_FEC_MDC__FEC_MDC, FEC_PAD_CTRL), 121 NEW_PAD_CTRL(MX35_PAD_FEC_MDIO__FEC_MDIO, FEC_PAD_CTRL | 122 PAD_CTL_HYS | PAD_CTL_PUS_22K_UP), 123 NEW_PAD_CTRL(MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, FEC_PAD_CTRL), 124 NEW_PAD_CTRL(MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, FEC_PAD_CTRL | 125 PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), 126 NEW_PAD_CTRL(MX35_PAD_FEC_CRS__FEC_CRS, FEC_PAD_CTRL | 127 PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), 128 NEW_PAD_CTRL(MX35_PAD_FEC_RDATA1__FEC_RDATA_1, FEC_PAD_CTRL | 129 PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), 130 NEW_PAD_CTRL(MX35_PAD_FEC_TDATA1__FEC_TDATA_1, FEC_PAD_CTRL), 131 NEW_PAD_CTRL(MX35_PAD_FEC_RDATA2__FEC_RDATA_2, FEC_PAD_CTRL | 132 PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), 133 NEW_PAD_CTRL(MX35_PAD_FEC_TDATA2__FEC_TDATA_2, FEC_PAD_CTRL), 134 NEW_PAD_CTRL(MX35_PAD_FEC_RDATA3__FEC_RDATA_3, FEC_PAD_CTRL | 135 PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), 136 NEW_PAD_CTRL(MX35_PAD_FEC_TDATA3__FEC_TDATA_3, FEC_PAD_CTRL), 137 }; 138 139 /* setup pins for FEC */ 140 imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); 141 } 142 143 int board_early_init_f(void) 144 { 145 struct ccm_regs *ccm = 146 (struct ccm_regs *)IMX_CCM_BASE; 147 148 /* enable clocks */ 149 writel(readl(&ccm->cgr0) | 150 MXC_CCM_CGR0_EMI_MASK | 151 MXC_CCM_CGR0_EDIO_MASK | 152 MXC_CCM_CGR0_EPIT1_MASK, 153 &ccm->cgr0); 154 155 writel(readl(&ccm->cgr1) | 156 MXC_CCM_CGR1_FEC_MASK | 157 MXC_CCM_CGR1_GPIO1_MASK | 158 MXC_CCM_CGR1_GPIO2_MASK | 159 MXC_CCM_CGR1_GPIO3_MASK | 160 MXC_CCM_CGR1_I2C1_MASK | 161 MXC_CCM_CGR1_I2C2_MASK | 162 MXC_CCM_CGR1_IPU_MASK, 163 &ccm->cgr1); 164 165 /* Setup NAND */ 166 __raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr); 167 168 setup_iomux_i2c(); 169 setup_iomux_usbotg(); 170 setup_iomux_fec(); 171 setup_iomux_spi(); 172 173 return 0; 174 } 175 176 int board_init(void) 177 { 178 gd->bd->bi_arch_number = MACH_TYPE_MX35_3DS; /* board id for linux */ 179 /* address of boot parameters */ 180 gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; 181 182 return 0; 183 } 184 185 static inline int pmic_detect(void) 186 { 187 unsigned int id; 188 struct pmic *p = pmic_get("FSL_PMIC"); 189 if (!p) 190 return -ENODEV; 191 192 pmic_reg_read(p, REG_IDENTIFICATION, &id); 193 194 id = (id >> 6) & 0x7; 195 if (id == 0x7) 196 return 1; 197 return 0; 198 } 199 200 u32 get_board_rev(void) 201 { 202 int rev; 203 204 rev = pmic_detect(); 205 206 return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8; 207 } 208 209 int board_late_init(void) 210 { 211 u8 val; 212 u32 pmic_val; 213 struct pmic *p; 214 int ret; 215 216 ret = pmic_init(I2C_PMIC); 217 if (ret) 218 return ret; 219 220 if (pmic_detect()) { 221 p = pmic_get("FSL_PMIC"); 222 imx_iomux_v3_setup_pad(MX35_PAD_WDOG_RST__WDOG_WDOG_B); 223 224 pmic_reg_read(p, REG_SETTING_0, &pmic_val); 225 pmic_reg_write(p, REG_SETTING_0, 226 pmic_val | VO_1_30V | VO_1_50V); 227 pmic_reg_read(p, REG_MODE_0, &pmic_val); 228 pmic_reg_write(p, REG_MODE_0, pmic_val | VGEN3EN); 229 230 imx_iomux_v3_setup_pad(MX35_PAD_COMPARE__GPIO1_5); 231 232 gpio_direction_output(IMX_GPIO_NR(1, 5), 1); 233 } 234 235 val = mc9sdz60_reg_read(MC9SDZ60_REG_GPIO_1) | 0x04; 236 mc9sdz60_reg_write(MC9SDZ60_REG_GPIO_1, val); 237 mdelay(200); 238 239 val = mc9sdz60_reg_read(MC9SDZ60_REG_RESET_1) & 0x7F; 240 mc9sdz60_reg_write(MC9SDZ60_REG_RESET_1, val); 241 mdelay(200); 242 243 val |= 0x80; 244 mc9sdz60_reg_write(MC9SDZ60_REG_RESET_1, val); 245 246 /* Print board revision */ 247 printf("Board: MX35 PDK %d.0\n", ((get_board_rev() >> 8) + 1) & 0x0F); 248 249 return 0; 250 } 251 252 int board_eth_init(bd_t *bis) 253 { 254 int rc = -ENODEV; 255 #if defined(CONFIG_SMC911X) 256 rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); 257 #endif 258 259 cpu_eth_init(bis); 260 261 return rc; 262 } 263 264 #if defined(CONFIG_FSL_ESDHC) 265 266 struct fsl_esdhc_cfg esdhc_cfg = {MMC_SDHC1_BASE_ADDR}; 267 268 int board_mmc_init(bd_t *bis) 269 { 270 static const iomux_v3_cfg_t sdhc1_pads[] = { 271 MX35_PAD_SD1_CMD__ESDHC1_CMD, 272 MX35_PAD_SD1_CLK__ESDHC1_CLK, 273 MX35_PAD_SD1_DATA0__ESDHC1_DAT0, 274 MX35_PAD_SD1_DATA1__ESDHC1_DAT1, 275 MX35_PAD_SD1_DATA2__ESDHC1_DAT2, 276 MX35_PAD_SD1_DATA3__ESDHC1_DAT3, 277 }; 278 279 /* configure pins for SDHC1 only */ 280 imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads)); 281 282 esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK); 283 return fsl_esdhc_initialize(bis, &esdhc_cfg); 284 } 285 286 int board_mmc_getcd(struct mmc *mmc) 287 { 288 return !(mc9sdz60_reg_read(MC9SDZ60_REG_DES_FLAG) & 0x4); 289 } 290 #endif 291