1 /*
2  *
3  * (C) Copyright 2009 Magnus Lilja <lilja.magnus@gmail.com>
4  *
5  * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 
10 
11 #include <common.h>
12 #include <netdev.h>
13 #include <asm/arch/clock.h>
14 #include <asm/arch/imx-regs.h>
15 #include <asm/arch/sys_proto.h>
16 #include <watchdog.h>
17 #include <power/pmic.h>
18 #include <fsl_pmic.h>
19 #include <errno.h>
20 
21 DECLARE_GLOBAL_DATA_PTR;
22 
23 #ifdef CONFIG_SPL_BUILD
24 void board_init_f(ulong bootflag)
25 {
26 	/*
27 	 * copy ourselves from where we are running to where we were
28 	 * linked at. Use ulong pointers as all addresses involved
29 	 * are 4-byte-aligned.
30 	 */
31 	ulong *start_ptr, *end_ptr, *link_ptr, *run_ptr, *dst;
32 	asm volatile ("ldr %0, =_start" : "=r"(start_ptr));
33 	asm volatile ("ldr %0, =_end" : "=r"(end_ptr));
34 	asm volatile ("ldr %0, =board_init_f" : "=r"(link_ptr));
35 	asm volatile ("adr %0, board_init_f" : "=r"(run_ptr));
36 	for (dst = start_ptr; dst < end_ptr; dst++)
37 		*dst = *(dst+(run_ptr-link_ptr));
38 	/*
39 	 * branch to nand_boot's link-time address.
40 	 */
41 	asm volatile("ldr pc, =nand_boot");
42 }
43 #endif
44 
45 int dram_init(void)
46 {
47 	/* dram_init must store complete ramsize in gd->ram_size */
48 	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
49 				PHYS_SDRAM_1_SIZE);
50 	return 0;
51 }
52 
53 int board_early_init_f(void)
54 {
55 	/* CS5: CPLD incl. network controller */
56 	static const struct mxc_weimcs cs5 = {
57 		/*    sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
58 		CSCR_U(0, 0,  0,  0,  0,  0,   0,  0,  3, 24, 0,  4,  3),
59 		/*   oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
60 		CSCR_L(2,  2,   2,   5,  2,  0,  5,  2,  0,  0,   0,   1),
61 		/*  ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
62 		CSCR_A(2,   2,  2,  2,  0,  0,  2,  2,  0,  0,  0,  0,   0,  0)
63 	};
64 
65 	mxc_setup_weimcs(5, &cs5);
66 
67 	/* Setup UART1 and SPI2 pins */
68 	mx31_uart1_hw_init();
69 	mx31_spi2_hw_init();
70 
71 	return 0;
72 }
73 
74 int board_init(void)
75 {
76 	/* adress of boot parameters */
77 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
78 
79 	return 0;
80 }
81 
82 int board_late_init(void)
83 {
84 	u32 val;
85 	struct pmic *p;
86 	int ret;
87 
88 	ret = pmic_init(I2C_PMIC);
89 	if (ret)
90 		return ret;
91 
92 	p = pmic_get("FSL_PMIC");
93 	if (!p)
94 		return -ENODEV;
95 	/* Enable RTC battery */
96 	pmic_reg_read(p, REG_POWER_CTL0, &val);
97 	pmic_reg_write(p, REG_POWER_CTL0, val | COINCHEN);
98 	pmic_reg_write(p, REG_INT_STATUS1, RTCRSTI);
99 #ifdef CONFIG_HW_WATCHDOG
100 	hw_watchdog_init();
101 #endif
102 	return 0;
103 }
104 
105 int checkboard(void)
106 {
107 	printf("Board: MX31PDK\n");
108 	return 0;
109 }
110 
111 int board_eth_init(bd_t *bis)
112 {
113 	int rc = 0;
114 #ifdef CONFIG_SMC911X
115 	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
116 #endif
117 	return rc;
118 }
119