1/*
2 * (C) Copyright 2009
3 * Stefano Babic DENX Software Engineering sbabic@denx.de.
4 *
5 * SPDX-License-Identifier:	GPL-2.0+
6 *
7 * Refer doc/README.imximage for more details about how-to configure
8 * and create imximage boot image
9 *
10 * The syntax is taken as close as possible with the kwbimage
11 */
12
13/*
14 * Boot Device : one of
15 * spi, sd (the board has no nand neither onenand)
16 */
17BOOT_FROM	sd
18
19/*
20 * Device Configuration Data (DCD)
21 *
22 * Each entry must have the format:
23 * Addr-type           Address        Value
24 *
25 * where:
26 *	Addr-type register length (1,2 or 4 bytes)
27 *	Address	  absolute address of the register
28 *	value	  value to be stored in the register
29 */
30/* EIM config-CS5 init -- CPLD */
31DATA 4 0xB8002050 0x0000D843
32DATA 4 0xB8002054 0x22252521
33DATA 4 0xB8002058 0x22220A00
34
35/* DDR2 init */
36DATA 4 0xB8001004 0x0076E83A
37DATA 4 0xB8001010 0x00000204
38DATA 4 0xB8001000 0x92210000
39DATA 4 0x80000f00 0x12344321
40DATA 4 0xB8001000 0xB2210000
41DATA 1 0x82000000 0xda
42DATA 1 0x83000000 0xda
43DATA 1 0x81000400 0xda
44DATA 1 0x80000333 0xda
45
46DATA 4 0xB8001000 0x92210000
47DATA 1 0x80000400 0x12345678
48
49DATA 4 0xB8001000 0xA2210000
50DATA 4 0x80000000 0x87654321
51DATA 4 0x80000000 0x87654321
52
53DATA 4 0xB8001000 0xB2210000
54DATA 1 0x80000233 0xda
55DATA 1 0x81000780 0xda
56DATA 1 0x81000400 0xda
57DATA 4 0xB8001000 0x82216080
58DATA 4 0x43FAC454 0x00001000
59
60DATA 4 0x53F80008 0x20034000
61
62/* Enable the clocks */
63DATA 4 0x53f8000c 0x1fffffff
64DATA 4 0x53f80010 0xffffffff
65DATA 4 0x53f80014 0xfdfff
66